Belkin F5D7633uk4 F5D7633uk4A - Manual
Belkin F5D7633uk4 Manual
 |
View all Belkin F5D7633uk4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Belkin F5D7633uk4 manual content summary:
- Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 1
Sprache: NL Voor Nederlandstalige handleidingen en/of software kunt u terecht op: ES Los manuales y/o el software están disponibles en la lengua local: IT I manuali e/o il software nella propria lingua si trovano su: www.belkin.co.uk/support User Manual F5D7633uk4 Mbps 802.11g 2.4GHz • Wireless - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 2
Wizard 21 Connecting to the Wireless LAN 24 7 Manually Configuring Your Router 25 Understanding the Web-Based User Interface 25 Changing LAN Settings 27 Internet WAN 30 Wireless 36 Firewall 54 Utilities 58 8 Troubleshooting 66 9 Technical Support Information 78 10 Appendixes 79 Appendix - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 3
, NT®, 2000, and XP, and others. You need an Internet browser and a network adapter that supports TCP/IP (the standard language 7 of the Internet). Front-Panel LED Display 8 Lighted LEDs on the front of the Router indicate which functions are in operation. You'll know at-a-glance whether your - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 4
fastest wireless connectivity IP Address Sharing Your Router employs Network Address Translation (NAT) to share the single IP address assigned to you by your Internet Service Provider while saving the cost of adding additional IP addresses to your Internet service account. SPI Firewall Your Router - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 5
a Home Network 4 By following our simple setup instructions, you will be able to use your Belkin home network to: • Share one high-speed play games online, check Internet email, and chat 9 Advantages of a Belkin Wireless Network 10 Mobility - you'll no longer need a dedicated "computer room - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 6
High-Speed Mode Wireless G Router • RJ11 Telephone Cord - Gray • RJ45 Ethernet Networking Cable - Yellow • ADSL Microfilter* • Power Adapter • User Manual CD *ADSL microfilter varies by country. If it's not included, you will need to purchase one. System Requirements • An active ADSL service with - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 7
These LAN Status LEDs are labeled 1-4 and correspond to the numbered ports on the rear of the Router. When a computer is 11 properly connected to one of the LAN ports on the rear of the Router, the LED will light. Solid GREEN means a computer or a 12 network-enabled device is connected. When - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 8
or receiving data wirelessly. OFF Green Green - blinking WLAN is off WLAN is up and connected When transmitted or receiving data 4. ADSL LED The ADSL LED flashes GREEN during negotiation with your ISP. It stays GREEN when the Router is connected properly to your ADSL service. OFF Green Green - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 9
the restore option in instances where you may have forgotten your custom password. 12 a. Resetting the Router Push and hold the Reset button for one second then release it. When the Power/Ready power supply to this inlet. Using the wrong type of power adapter may cause damage to your Router. 7 - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 10
's performance that might be related to range or obstruction factors, try moving the computer to a position between five and 10 feet from the Router, in order to see if distance is the problem. If difficulties persist even at close range, please see the Troubleshooting section for solutions. 8 - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 11
1. Power off your computers and networking equipment. 2 2. Connect your computer to one of the YELLOW RJ45 ports on the rear of the Router labeled "connections to your computers" by 3 using an Ethernet networking cable (one Ethernet network cable is supplied). 4 5 6 7 8 9 10 11 12 - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 12
. Note: Do not connect the ADSL microfilter between the wall jack and the Router-this will prevent ADSL service from reaching the modem. 2. If your telephone service and ADSL service are on the same telephone line and you are using an ADSL microfilter with built-in splitter, connect the splitter - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 13
a telephone cord from the wall jack to the gray RJ11 port labeled "DSL line" on the back of 11 your Router. 12 4. If you have an RJ45 wall jack for your ADSL service, connect an RJ45-to-RJ11 converter to the wall jack. Then connect one end of a telephone cord to the - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 14
input plug labeled "Power". Note: For safety and performance reasons, only use the supplied power adapter to prevent damage to the Router. 2. After connecting the power adapter and the power source is turned on, the Router's power icon on the front panel should be on. It might take a few minutes for - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 15
a static IP connection type. Write the address information the table below. You will need to enter this information into the Router. 6. If not already selected, select "Obtain an IP address automatically" (1) and "Obtain DNS server address automatically" (3). Click "OK". Your network adapter(s) are - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 16
the drop-down menu. 2. Select "TCP/IP -> settings" for your installed network adapter. You will see the following window. (1) (3) (2) 3. If "Specify an IP address" is selected, your Router will need to be set up for a static IP connection type. Write the address information in the table below. You - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 17
computers to your Router after the Router has been set up to connect 2 to the Internet. 3 Manually Configuring Network Adapters in Mac OS up " (2), if "Manually" is selected, your Router 11 will need to be set up for a static IP connection type. Write the address information in the - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 18
Setting Up your Computers 4. If not already set, at "Configure:", choose "Using DHCP Server". This will tell the computer to obtain an IP address from the Router. 5. Close the window. If you made any changes, the following window will appear. Click "Save". Restart the computer. When the computer - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 19
section Setting Up your Computers 1 Manually Configuring Network Adapters in Mac OS X 1. Click on the "System Preferences" icon. 2 3 4 2. Select "Network" (1) from the "System Preferences" menu. 5 6 (1) 7 8 9 3. Select "Built-in Ethernet" (2) next to "Show" in the - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 20
selected. If it is, you will need to configure your Router for a PPPoE connection type using your user name and password. 5. If "Manually" is selected, your Router will need to be set up for a static IP connection type. Write the address information in the table below. You will need to enter this - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 21
Web Browser Settings 1 In most cases, you will not need to make any changes to your web browser's settings. If you are having trouble accessing the Internet or 2 the advanced web-based user interface, then change your browser's settings to the recommended settings in this section. 3 Internet - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 22
Setting Up your Computers 4. Make sure there are no check marks next to any of the displayed options: "Automatically detect settings", "Use automatic configuration script", and "Use a proxy server". Click "OK". Then click "OK" again in the "Internet Options" page. Netscape Navigator 4.0 or Higher 1. - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 23
address bar. Then press the "Enter" key. 4 5 Note: It is strongly recommended that you use a computer physically connected to the Router with an RJ45 cable for initial setup. Using a wirelessly section, entitled "Manually Configuring your Router", for details on how to change your - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 24
with the Setup Wizard 3. A Status page will follow showing detail status of your Router. Next, click on the "Setup Wizard" button for express configuration (recommended). 4. Click on the "Setup Wizard" button to start the Router's Setup Wizard. The first step is to select your connection type (this - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 25
values provided by your ISP and click "Next". 2 3 4 5 6 7 Note: For more detailed instruction on other connection types, please refer to the "Manually Configuring your Router" section of this User Manual. 8 6. Double-check the settings shown on the following screen. You 9 can click "Back - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 26
change SSID to something of your own. Please read the User Manual for details on levels of wireless security and how to change your security settings. 8. Congratulations! You have finished installing your new Belkin Router. To test your Internet connection, open your browser and visit any website - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 27
Manually Configuring your Router section 1 Understanding the Web-Based User Interface The home page shows you a quick view of the Router's status and settings. back to the home page. 3. Help Button The "Help" button gives you access to the Router's help pages. Help is also available on many pages - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 28
Settings Shows the settings of the Internet/WAN side of the Router that connects to the Internet. Changes to any of these settings firmware version, boot-code version, hardware version, and serial number of the Router. 10. Page Name The page you are on can be identified by this name. This manual - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 29
Manually Configuring your Router 1 Changing LAN Settings All settings for the internal LAN setup of the Router can be viewed and changed here. 2 Clicking on the header of the LAN tab (1) will take you to the LAN 3 tab's header page. A quick description - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 30
Manually Configuring your Router LAN Settings (1) (2) (3) (4) (5) (6) 1. IP Address The "IP address" is the internal IP address of the Router. The default IP address is "192.168.2.1". To access the setup interface, type this IP address into the address bar of your browser. This address can be - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 31
set any 8 of the other advanced features of the Router, such as DMZ or client IP filters, these are dependent on the IP address. For this reason, you will not want the IP address to change. 9 6. Local Domain Name The default setting is "Belkin". You can set a local domain name 10 (network - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 32
Manually Configuring your Router DHCP Client List You can view a list of the computers (known as clients), which are connected to your network. You are able to view the IP address (1) of the computer, the host name (2) (if the computer has been assigned one), and the MAC address (3) of the computer - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 33
Manually Configuring your Router 1 Connection Type From the "Connection Type" page, you can select one of these five connection types based on the instruction provided by your ISP: 2 • PPPoE 3 • PPPoA • Dynamic IP (1483 Bridged) 4 • Static IP (IPOA) • Modem Only (Disable Internet Sharing) - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 34
Manually Configuring your Router Setting your ISP Connection Type to PPPoE or PPPoA PPPoE (Point over one virtual circuit (more overhead). 6. Dial on Demand - By selecting "Dial on Demand" your Router will automatically connect to the Internet when a user opens up a web browser. 7. Idle Time (Minutes - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 35
Manually Configuring your Router 1 Setting your Connection Type to Dynamic IP (1483 Bridged) This connection method bridges your network and ISP's network together. The Router will obtain an IP address automatically from your 2 ISP's DHCP server. 3 (1) 4 (2) 5 6 7 1. VPI/VCI - Enter your - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 36
Manually Configuring your Router Setting your ISP Connection to Static IP (IPoA) This connection type is also called "Classical IP over ATM" or "CLIP", which your ISP provides a fixed IP for your Router to connect to the Internet. (1) (2) (3) (4) (5) 1. WAN IP Address - Enter an IP address assigned - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 37
Manually Configuring your Router section 1 Setting your Connection Type to Modem Only (Disable Internet Sharing) In this mode, the Router Links (URLs) like "www.belkin.com" to IP addresses. Many ISPs do not require you to enter this information 10 into the Router. The "Automatic from ISP" - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 38
drop-down list. Click "Apply Changes". The change is immediate. 2. Changing the Wireless Network Name (SSID) To identify your wireless network, a name called the SSID (Service Set Identifier) is used. The default SSID of the Router is "belkin54g". You can change this to anything you want to or you - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 39
and 802.11b standards. When to Use 802.11g-LRS Mode - In some cases, older 802.11b clients may not be compatible with 802.11g wireless technology. These adapters tend to be of inferior design and may use older drivers or technology. 802.11g-LRS (Limited Rate Support) allows 37 - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 40
Manually Configuring your Router these clients to be compatible with the newer 802.11g technology. Switching to this mode can solve problems that sometimes occur with these clients. If you suspect that you are using a client adapter that falls into this category, first check with the adapter vendor - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 41
Manually Configuring your Router section 1 Encryption/Security Securing your Wi-Fi Network 2 Here are a few different ways you can maximize the security of your wireless network and protect your data from prying eyes and ears. 3 This section is intended for the home, home office, and small - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 42
WEP encryption, but you might have older equipment that only supports 64-bit WEP. All Belkin wireless products will support both 64-bit and 128-bit WEP. Encryption Keys After your Router or access point and enter it manually into the hex WEP key table in your wireless card's configuration screen. 40 - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 43
Manually Configuring your Router 1 WPA (Wi-Fi Protected Access) WPA (Wi-Fi Protected Access) is a new Wi-Fi standard that was designed to improve upon the security features of WEP. To use WPA 2 security, the drivers and software of your wireless equipment must be upgraded to support WPA. These - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 44
Manually Configuring your Router Sharing the Same Network Keys Most Wi-Fi products ship with security turned off. So once you have your network working, you need to activate WEP or WPA and make sure your wireless networking devices are sharing the same Network key. Wireless G Router Network key= - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 45
Manually Configuring your Router 1 Using a Hexadecimal Key A hexadecimal key is a mixture of numbers settings on your Router and your wireless computers. 7 8 9 Note to Mac users: Original Apple AirPort® products support 64-bit encryption only. Apple AirPort 2 products can support 64-bit or - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 46
manually. A hex (hexadecimal) key is a mixture of numbers and letters from A-F and 0-9. For 64-bit WEP, you need to enter 10 hex keys. For instance: AF 0F 4B C3 D4 = 64-bit WEP key 3. Click "Apply Changes" to finish. Encryption in the Router is now set. Each of your computers on your wireless - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 47
will now need to be configured with the same security settings. 12 WARNING: If you are configuring the Wireless Router or access point from a computer with a wireless client, you will need to ensure that security is turned ON for this wireless client. If this is not done, you will lose your - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 48
time of this User Manual's publication, a security patch download is available free from Microsoft. This patch works only with the Windows XP operating system. You also need to download the latest driver for your Belkin Wireless G Desktop or Notebook Network Card from the Belkin support site. Other - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 49
Manually Configuring your Router 1 Setting WPA-PSK (no server) 1. From the "Security Mode" drop-down menu, select "WPA-PSK 2 (no server)". 2. For Encryption Technique, select "TKIP" or "AES". This - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 50
Manually Configuring your Router IP address Belkin Wireless G Network Cards to use security. At this point, you should already have your Wireless Router or access point set to use WPA or WEP. In order for you to gain a wireless connection, you will need to set your wireless notebook card and wireless - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 51
Manually Configuring your Router 1 Connecting your Computer to a Wireless Network that Requires a 64-Bit or 128-Bit WEP Key 2 1. Double-click the "Signal Indicator" icon to bring up the "Wireless Network" screen. The "Advanced" button will allow you to view 3 and configure more options of your - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 52
Manually Configuring your Router Connecting your Computer to a Wireless Network that Requires WPA-PSK (no server) 1. Double-click the "Signal Indicator" icon to bring up the "Wireless Network" screen. The "Advanced" button will allow you to view and configure more options of your wireless card. 2. - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 53
for a Non-Belkin Wireless Desktop and Wireless Notebook Cards For non-Belkin WPA Wireless Desktop and Wireless Notebook Cards that are not equipped with WPA-enabled software, a file from Microsoft called "Windows XP Support Patch for Wireless Protected Access" is available as a free download. Please - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 54
Manually Configuring your Router Important: You also need to ensure that the wireless card manufacturer supports WPA and that you have downloaded and installed the latest driver from their support site. Supported Operating Systems: • Windows XP Professional • Windows XP Home Edition Setting Up - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 55
section Manually Configuring your Router 1 4. Under the "Wireless Networks" tab, click the "Configure" button, and you will see the following are using this computer to connect to a 10 corporate network that supports an authentication server such as a radius server. Please consult your network - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 56
Manually Configuring your Router Firewall Your Router is equipped with a firewall that will protect your network from a wide array of common hacker attacks including: • IP Spoofing • Land Attack • Ping of Death (PoD) • Denial of Service (DoS) • IP with zero length • Smurf Attack • TCP Null Scan • - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 57
row available. Click "Add" to save the setting for that application. Manually Entering Settings into the Virtual Server To manually enter settings, click on "Custom Server" and enter a name for the server. Enter the Server IP address in the space provided for the internal machine and the port - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 58
Manually Configuring your Router Client IP Filters The Router can be configured to restrict access to the Internet, email, or other network services at of the filter in "Filter Name" box (1) and IP address of the computer you wish to restrict access to in the IP field (2). Next, enter "80:80" in the - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 59
use what is known as "pinging" to find potential victims on the Internet. By pinging a specific IP address and receiving a response from the IP address, a hacker can determine 11 that something of interest might be there. The Router can be set up so it will not respond to an ICMP ping from the - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 60
Manually Configuring your Router Utilities The "Utilities" screen lets you manage different parameters of the Router and perform certain administrative functions. Restart Router Sometimes it may be necessary to restart or reboot the Router if it begins working improperly. Restarting or rebooting the - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 61
Manually Configuring your Router 1 Restarting the Router to Restore Normal Operation 1. Click the "Restart Router" button. 2 2. The following message will appear. Click "OK" to restart your Router. 3 4 5 Restore Factory Defaults Using this option will restore all of the settings in the - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 62
Manually Configuring your Router Saving/Backup Current Settings You can save your . It is recommended that you back up your current configuration before performing a firmware update. 1. Click "Save". A window called "File Download" will open. Click "Save". 2. A window will open that allows you - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 63
section Manually Configuring your Router 3. When the save is complete, you will see the window below. 1 Click "Close". 2 3 4 5 The configuration is now saved. 6 Restore Previous Settings This option will allow - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 64
Manually Configuring your Router Firmware Update From time to time, Belkin may release new versions of the Router's firmware. Firmware updates contain feature improvements and fixes to problems that may have existed. When Belkin releases new firmware, you can download the firmware from the Belkin - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 65
Manually Configuring your Router System Settings 1 The "System Settings" page is where you can enter a new administrator password, set the time zone, enable remote 2 management, and turn on and off the UPnP function of the Router. 3 Setting or Changing the Administrator Password The Router - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 66
your Belkin Router, MAKE SURE YOU HAVE SET THE ADMINISTRATOR PASSWORD. Remote management allows you to make changes to your Router's settings the IP address you know you will be accessing the Router from in the space provided and select "Only this IP address can remotely manage the Router". Before - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 67
Manually Configuring your Router 1 Click on the "Apply Changes" button to save your settings. 2 3 4 5 Enabling/Disabling UPnP 6 UPnP (Universal Plug-and-Play) is yet another advanced feature offered by your Belkin Router. It is a technology that offers seamless operation of voice messaging, - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 68
ADSL line is connected to the port on the Router labeled "DSL Line" and the ADSL LED is on. 2. Make sure you have the correct VPI/VCI, user name, and password from your ISP provider. Problem: My connection type is static IP address. I can't connect to the Internet. Solution: Since your connection - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 69
Troubleshooting section 1 Problem: My wireless PC cannot connect to the Router. 2 Solution: 1. Make sure the wireless PC has the same SSID settings as the 3 Router bottom right-hand corner of the screen. If you're using a Belkin Wireless Card, the tray icon should look like this. The icon may - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 70
name is listed". No, my network name is not listed-go to the troubleshooting solution titled "I can't connect to the Internet wirelessly, and my network name is not listed". Problem: I can't connect to the Internet wirelessly, but my network name is listed. Solution: If the name of your network - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 71
. This setting is found on the Router's wireless "Channel 4 and SSID" configuration page. If you are still unable to access the Internet after completing 5 these steps, please contact Belkin Technical Support. 6 Problem: My wireless network performance is inconsistent. 7 Data transfer - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 72
your wireless card's user manual. Problem: I am having difficulty setting up Wired Equivalent Privacy (WEP) security on a Belkin Router or Belkin Access Point. Solution 1. Log into your Wireless Router or access point. 2. Open your web browser and type in IP address of the Wireless Router or access - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 73
, try 64-bit encryption. 8 Problem: 9 I am having difficulty setting up Wired Equivalent Privacy (WEP) security on a Belkin Wireless Card. 10 Solution: The Wireless Card must use the same key as the Wireless Router or access point. For instance, if your Wireless Router or access point 11 - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 74
the manufacturer for that wireless client card's user manual. Problem: Do Belkin products support WPA? Solution Note: To use WPA security, all your clients must be upgraded to drivers and software that support it. At the time of this FAQ publication, a security patch download is available, for free - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 75
Troubleshooting section Problem: 1 I am having difficulty setting up Wi-Fi Protected Access (WPA) security on a Belkin Wireless Router or Belkin Access to be identical on the clients that you set up. 3. Enter the IP address of the radius server into the "Radius Server" fields. 4. Enter the - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 76
Troubleshooting Problem: I am having difficulty setting up Wi-Fi Protected Access (WPA) security on a Belkin Wireless Card for a home network. Solution: Clients must use the same key that the wireless router or access point uses. For instance if the key is "Smith Family Network Key" in the wireless - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 77
: If you are NOT using a Belkin Wireless Desktop or Wireless 8 Notebook Network Card and it is not equipped with WPA-enabled software, a file from Microsoft called "Windows XP Support Patch 9 for Wireless Protected Access" is available for free download. Download the patch from Microsoft by - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 78
Troubleshooting 3. Under the "Wireless Networks" tab, click supports an authentication server such as a radius server. Please consult your network administrator for further information. 5. Select "TKIP" or "AES" under "Date Encryption". This setting will have to be identical to the wireless router - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 79
Troubleshooting 1 Wireless Comparison Chart 2 802.11g 802.11a Belkin Pre-N Wireless Technology 802.11b 3 4 Speed 11Mbps 54Mbps 54Mbps 108Mbps Frequency Common Common Common 5 household household household devices such as devices such as devices such as 6 cordless - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 80
Technical Support Information Technical Support For latest software updates or if you have any further questions regarding installation of this product, please visit www.belkin.com/networking or contact: US: 877-736-5771 or 310-898-1100 ext. 2263 Europe: 00 800 223 55 460 Australia: 1800 235 - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 81
Server is a server located on the Internet that translates URLs (Universal 10 Resource Links) like www.belkin.com to IP addresses. Many ISPs do not require you to enter this information into the Router. If you are using a static IP connection type, then you may need to enter 11 a specific DNS - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 82
you pay for your Internet service by the minute. Channel and SSID To change the channel of operation of the Router, select the desired channel wireless network's name. You can make the SSID anything you want to. If there are other wireless networks in your area, you should give your wireless network - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 83
Many wireless network adapters currently on the market possess a feature known as site survey. It scans the air for any available 2 network and allows each computer to automatically select a network from the survey. This occurs if the computer's SSID is set to "ANY". 3 Your Belkin Router can - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 84
Appendixes Client IP Filters The Router can be configured to restrict access to the Internet, email, or other network services at specific days and schedule for use in the "Access Control" page. MAC Address Filtering The MAC address filter is a powerful security feature that allows you to specify - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 85
the DMZ host will be directed to. Type in the public (WAN) IP address you wish the DMZ host to direct to, enter the last two digits of the IP 5 address of the DMZ host computer, and click "Apply Changes". 6 Administrator Password The Router ships with NO password entered. If you wish to add - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 86
Before you enable this function, MAKE SURE YOU HAVE SET THE ADMINISTRATOR PASSWORD. Remote management allows you to make changes to your Router's settings from anywhere on the Internet. UPnP UPnP (Universal Plug-and-Play) is a technology that offers seamless operation of voice messaging, video - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 87
devices. To achieve the best wireless network coverage for your "wireless 6 clients" (i.e., computers enabled by Belkin Wireless Notebook Network Cards, Wireless Desktop Network Cards, and Wireless 7 USB Adapters): • Ensure that your Wireless Router's (or access point's) networking antennas - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 88
your phone supports channel selection, change the channel on the phone to the farthest channel from your wireless network. For example, change the phone to channel 1 and move your Wireless Router (or access point) to channel 11. See your phone's user manual for detailed instructions. • If necessary - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 89
Wireless Router (or access point). Should you need to cover an even wider area, we suggest the Belkin 2 Wireless broadband provided by 6 another cable or DSL service • Most online banking websites 7 • , please review the steps in the previous pages to be sure you have addressed these issues - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 90
Appendixes Country Connection VPI/VCI Encapsulation ISPs Protocol Europe France Germany Holland PPPoE PPPoE 1483 Bridged 8/35 LLC 1/32 LLC 0/35 LLC 0/32 LLC 0/34 LLC PPPoA 8/48 VC MUX PPPoA 0/32 VC MUX Belgium Italy Spain Sweden UK PPPoE PPPoA 8/35 8/35 PPPoE or PPPoA PPPoE - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 91
2 DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY 3 We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product, 4 F5D7633-4 5 to which this declaration relates, complies with Part 15 of the - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 92
connected. • Consult the dealer or an experienced radio/TV technician for help. Modifications The FCC requires the user to be notified that any expressly approved by Belkin Corporation may void the user's authority to operate the equipment. Canada-Industry Canada (IC) The wireless radio of this - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 93
the product has been damaged by accident, abuse, misuse, or misapplication; if the product has been modified without 4 the written permission of Belkin; or if any Belkin serial number has been removed or defaced. 5 THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS - Belkin F5D7633uk4 | F5D7633uk4A - Manual - Page 94
Wireless G Router Designed to Meet ADSL2+ Specification Belkin Ltd. Express Business Park, Shipton Way Rushden, NN10 6GL, United Kingdom Tel: +44 (0) 1933 35 2000 Fax: +44 (0) 1933 31 2000 Belkin 39 46 62 89 Belkin Tech Support Europe: 00 800 223 55 460 © 2004 Belkin Corporation. All rights
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
 |
 |
F5D7633uk4
User Manual
EN
Manuals and/or Software are
available in your local language:
FR
Les manuels et/ou le logiciel sont
disponibles en français :
DE
Benutzerhandbuch und/oder
Software gibt es in Ihrer Sprache:
NL
Voor Nederlandstalige handleidingen
en/of software kunt u terecht op:
ES
Los manuales y/o el software están
disponibles en la lengua local:
IT
I manuali e/o il software nella
propria lingua si trovano su:
www.belkin.co.uk/support
Network your
computers and
share your ADSL
Internet access
ADSL Modem
with High-Speed Mode
Wireless G Router
Designed to Meet ADSL2+ Specification