Belkin F9K1103 User Manual

Belkin F9K1103 Manual

Get Belkin F9K1103 PDF manuals and user guides View all Belkin F9K1103 manuals
Add to My Manuals
Save this manual to your list of manuals

Belkin F9K1103 manual content summary:

  • Belkin F9K1103 | User Manual - Page 1
    WIRELESS DUAL-BAND N+ ROUTER N750 DB User Manual F9K1103 8820-00778 Rev. A01
  • Belkin F9K1103 | User Manual - Page 2
    Belkin Router 20 Updating Your Router via Your System Tray 22 Updating the Router's Firmware via the Web Interface 23 Resetting the Router 27 Restoring Your Router to Factory Defaults 27 Restoring the Router to Default Settings Using the Web Interface . . 28 Troubleshooting, Support, and
  • Belkin F9K1103 | User Manual - Page 3
    's in the Box N750 DB Wireless Dual-Band N+ Router Ethernet cable (attached to router) Power supply (attached to router) Network information card (attached to router) Belkin Setup CD with User Manual Initial Setup Where to Place Your Router For the best results, place the Router next to your modem
  • Belkin F9K1103 | User Manual - Page 4
    Getting Started How to Set It Up 1 2 3 modem 2
  • Belkin F9K1103 | User Manual - Page 5
    your computer and plug the Router into the modem instead. 2. Plug the Router's power supply into a wall outlet. 3. Put the CD into your computer. If the CD doesn't open automatically, please browse to your CD drive and double-click on the Belkin Setup CD icon. Setup 4. Click the Setup icon on the CD
  • Belkin F9K1103 | User Manual - Page 6
    Getting Started 5. After a brief installation, the setup software will ask you for the network name and password from the network information card that is attached to your Router. Store the card under the base of your Router for future reference. 4
  • Belkin F9K1103 | User Manual - Page 7
    software is installed. This may take a few minutes to complete. Once finished, a "Success" message will appear indicating that you are connected to the Internet via your new Belkin Router. During setup you may be asked for additional information. You may need to enter a username and password
  • Belkin F9K1103 | User Manual - Page 8
    you would like to change: Network Name & Security - Personalize your network name (SSID), password, and strength of wireless security. Internet Service Provider & Login Settings - Have you moved or changed Internet Service Providers? If you'd like to change these settings without running through the
  • Belkin F9K1103 | User Manual - Page 9
    to your Belkin Router and it is connected to the Internet. Amber: You are connected to your Belkin Router, but it is not connected to the Internet. Router Settings User Manual Network problem detected... Networked USB Devices Backup your les and folders Video Mover Check for Updates Options Exit
  • Belkin F9K1103 | User Manual - Page 10
    Your Browser In your browser, type "http://router" (you do not need to type in anything else such as "www"). Then press the Enter key. If you're still having trouble running the manual setup option, type "192.168.2.1" in your browser (you do not need to type in anything else such as "http
  • Belkin F9K1103 | User Manual - Page 11
    , browse to your CD drive and open the Belkin Setup CD icon. 2. Click the Setup icon on the CD menu. 3. After a brief installation, the setup software will ask you for the network name and password from the network information card that came with your Router. This card is most likely now located
  • Belkin F9K1103 | User Manual - Page 12
    you choose not to use the included Setup CD for adding additional computers or wireless devices, you can manually add these items to your network. 1. Locate the wireless-network-connections option on your computer or wireless device. 2. Select your Belkin Router from the list of available networks
  • Belkin F9K1103 | User Manual - Page 13
    Getting Started Adding USB Devices 11
  • Belkin F9K1103 | User Manual - Page 14
    found under the Belkin Router Manager icon displayed in your system tray (Windows) or menu bar (Mac). If you have difficulty sharing a drive on your network, please see the "Troubleshooting" section of this manual. A few USB hard disks require more power than the Router's USB port provides. In these
  • Belkin F9K1103 | User Manual - Page 15
    devices may also be shared via your Router. Plug your device into the USB port located on the back of your Router. When the light above the USB port is lit, your device is available to computers on your network. Computers running the Belkin USB Print and Storage Manager will be able to make use of
  • Belkin F9K1103 | User Manual - Page 16
    that are connected to your Router's USB port and shared across your network. USB Print and Storage Manager is found in the Belkin Router Manager icon displayed in your system tray (Windows) or menu bar (Mac). When you have one or more USB devices attached to your Router, the main actions for those
  • Belkin F9K1103 | User Manual - Page 17
    page when they attempt to surf the Web. They will need to enter the guest password into this page to continue. Video Mover Video Mover sends media from a USB drive attached to your Router to any UPnP (Universal Plug-and-Play) or DLNA-compatible device on your network. These devices include certain
  • Belkin F9K1103 | User Manual - Page 18
    . Either the modem is off, is not plugged into the Router, or is unresponsive. B) Wi-Fi Protected Setup (WPS) Light and Button The WPS button on the front of your Router can be used to help establish a secure connection between your Router and other WPS-enabled Wi-Fi devices such as computers. To
  • Belkin F9K1103 | User Manual - Page 19
    light turns off. On: The USB device is connected and being shared on your network. D) Reset Button This button is used to restart your Router in rare cases when it functions incorrectly. Resetting the Router will preserve your settings. This button may also be used to restore the factory default
  • Belkin F9K1103 | User Manual - Page 20
    Details Technical Features Integrated 802.11n Wireless Access Point Utilizing Dual-Band Network technology, your Router creates two separate networks (one at 2.4GHz band and the other at 5GHz band), allowing increased bandwidth to all your connected wireless devices and computers. NAT IP Address
  • Belkin F9K1103 | User Manual - Page 21
    interface adapter TCP/IP networking protocol installed on each computer RJ45 Ethernet networking cable Internet browser Setup Software A computer running Windows® XP SP2 or higher, Windows Vista®, or Windows 7; or Mac OS® X v10.5 or v10.6 only Minimum 1GHz processor and 512M BRAM 600MB of free
  • Belkin F9K1103 | User Manual - Page 22
    USING YOUR ROUTER Enabling Auto Update on Your Belkin Router The Router has the capability to automatically check for a newer version of firmware and alert you when it's available. You can choose to download the new version or ignore it. By default this feature is disabled. If you want to enable it
  • Belkin F9K1103 | User Manual - Page 23
    using your router 4. Click on "System Settings" in the left-hand column under the "Utilities" heading. 5. Toward the lower-half side of the screen you will find "Auto Update Firmware Enabling". 
 6. Select "Enable" by clicking the radio button and then click "Apply Changes" at the bottom of the
  • Belkin F9K1103 | User Manual - Page 24
    your router Updating Your Router via Your System Tray (Windows) or Menu Bar (Mac) Once you have completed the setup process, you will need to update the new software for your Router. This can be done easily via your computer's system tray or menu bar. Setup steps: 1. Click on the blue Belkin Router
  • Belkin F9K1103 | User Manual - Page 25
    following steps show you how to update your Router's firmware using its web interface. You do not need to be connected to the Internet as this interface is built into the Router itself. Setup steps: 1. Locate and download the firmware file from the Belkin support site. (Type your part number into
  • Belkin F9K1103 | User Manual - Page 26
    the web browser, type "http://192.168.2.1" and press "Enter" on your keyboard. 6. Click "Login" in the upper right-hand corner of the page. The Router does not ship with a password, so just click "Submit". 7. Click on "Firmware Update" toward the bottom of the left-hand menu. 24
  • Belkin F9K1103 | User Manual - Page 27
    : The firmware version in the images below is depicted as an example. Your file name will vary depending on your model and version. 9. Select the firmware file by left-clicking on it and then click the "Open" button in the lower-right corner of the window. This will take you back into the Router
  • Belkin F9K1103 | User Manual - Page 28
    want to continue with upgrading?" will appear. Click "OK". 12. A second prompt will open telling you the Router will not respond during the upgrade and warning you not to remove the power supply from the Router. Click "OK" once more. Congratulations. The firmware has been updated successfully. 26
  • Belkin F9K1103 | User Manual - Page 29
    forgotten your custom password. Resetting the Router Push and release the "Reset" button. The lights on the Router will momentarily flash. The "Router" light will begin to blink. When the "Router" light becomes solid again, the reset is complete. Restoring Your Router to Factory Defaults Press and
  • Belkin F9K1103 | User Manual - Page 30
    Settings Using the Web Interface Symptoms You need to restore the factory defaults using the web interface. This may be because the Router is not performing as expected or you wish to remove all previously configured settings. Setup steps 1. Open a web browser on the computer. 2. In the address bar
  • Belkin F9K1103 | User Manual - Page 31
    using your router 
 4. Click on "Restore Factory Defaults" in the lefthand column under the "Utilities" heading. 5. Click on the "Restore Defaults" button. 29
  • Belkin F9K1103 | User Manual - Page 32
    "Warning: All your settings will be lost. Are you sure you want to do this?" Click "OK". 7. The Router will begin the restoring process. Once the restore is complete, the Router will reboot. Note: This may take several minutes. Your Router has successfully been restored to its factory settings. 30
  • Belkin F9K1103 | User Manual - Page 33
    setup manually. Please see "Manual Setup Using Your Browser" earlier in this manual for more information. Belkin Setup cannot find my Router. If Belkin Setup is not able to communicate with your Router during the installation process, please check the following items. 1. Make sure that the wireless
  • Belkin F9K1103 | User Manual - Page 34
    , Support, and Warranty Belkin Setup cannot connect my Router to the Internet. If Belkin Setup is not able to connect the Router to the Internet, please check the following items: 1. Use the troubleshooting suggestions within Belkin Setup. 2. If your ISP requires a user name and password
  • Belkin F9K1103 | User Manual - Page 35
    Troubleshooting, Support, and Warranty Belkin Setup completed installation, but I cannot browse the Web. The light on the front of my Router is solid amber. 1. Use the troubleshooting suggestions within Belkin Setup. 2. If your ISP requires a user name and password, make sure that you have typed in
  • Belkin F9K1103 | User Manual - Page 36
    Troubleshooting, Support, and Warranty I can't connect to the Internet wirelessly and my network name is not listed in Available Networks. 1. Verify that your Router is on and the front-panel light shows solid blue. 2. If you are far from the Router, you might try moving closer to see if you might
  • Belkin F9K1103 | User Manual - Page 37
    Troubleshooting, Support, and Warranty Limiting the wireless transmit rate-Limiting the wireless transmit rate can help improve range and connection stability. Most wireless cards have the ability to limit the transmission rate. To change this property in Windows, go to the Windows Control Panel,
  • Belkin F9K1103 | User Manual - Page 38
    Troubleshooting, Support, and Warranty Does the Router support Wireless Protected Access (WPA) security? The Router ships with WPA/WPA2 security turned on. Windows XP and some older network hardware may require a software update to support WPA/WPA2. I am having difficulty setting up WPA security on
  • Belkin F9K1103 | User Manual - Page 39
    will need to use the new key. Note: If you are configuring the Router over a wireless connection, you will have to re-connect to the Router after changing any security settings. Note: Some older networking hardware supports only 64-bit WEP encryption. If your older computers cannot connect to your
  • Belkin F9K1103 | User Manual - Page 40
    Troubleshooting, Support, and Warranty A disk I plugged into the USB port is not showing up on my computer or in Memory Safe. 1. Is the light on over the USB port that the disk is plugged into? If not, try unplugging and re-plugging the disk. Please check that the USB connector is firmly plugged
  • Belkin F9K1103 | User Manual - Page 41
    Troubleshooting, Support, and Warranty A different sort of USB device that I plugged into the USB port is not showing up on my computer. Most USB devices other than disks and printers must be accessed via the USB Print and Storage Center. 1. Is the light on over the USB port that the device is
  • Belkin F9K1103 | User Manual - Page 42
    Troubleshooting, Support, and Warranty Technical Support US h t t p: // w w w.b e l k i n.c o m /s u p p o r t UK ht t p: // w w w.b e lk in.c om /uk /supp or t Australia h t t p: // w w w.b e l k i n.c o m /a u /s u p p o r t New Zealand h t t p: // w w w.b e l k i n.c o m /a u /s u p p o r t
  • Belkin F9K1103 | User Manual - Page 43
    Troubleshooting, Support, and Warranty Belkin International, Inc., Limited 2-Year Product Warranty What this warranty covers. Belkin International, Inc. ("Belkin") warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, assembly, material, or
  • Belkin F9K1103 | User Manual - Page 44
    receipt. 2. Your Belkin Customer Service Representative will then instruct you on how to forward your receipt and Belkin product and how to proceed with your claim. Belkin reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin for inspection
  • Belkin F9K1103 | User Manual - Page 45
    Troubleshooting, Support, and Warranty How state law relates to the warranty. THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN. THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A
  • Belkin F9K1103 | User Manual - Page 46
    We, Belkin International, Inc., of 12045 Waterfront Drive, Los Angeles, CA 90094, declare under our sole responsibility that the device, , F9K1103 v1, energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
  • Belkin F9K1103 | User Manual - Page 47
    © 2011 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Mac, Mac OS, and Safari are trademarks of Apple Inc., registered in the U.S. and other countries. Windows, Windows Vista, Internet Explorer, and DirectX are either
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
User Manual
F9K1103
8820-00778 Rev. A01
WIRELESS DUAL-BAND N+ ROUTER
N
750
DB