Beltronics Sti-R Installation Manual
Beltronics Sti-R Manual
 |
UPC - 065789270709
View all Beltronics Sti-R manuals
Add to My Manuals
Save this manual to your list of manuals |
Beltronics Sti-R manual content summary:
- Beltronics Sti-R | Installation Manual - Page 1
R ADAR• L ASER• SAFET Y DETECTOR Installation Manual Read This First Important Notes Please read both sides of these instructions before starting your installation. STi-R Comes Complete Front Radar Receiver • Weather-proof Front Radar and Laser Receiver • Mounting bracket with stainless steel - Beltronics Sti-R | Installation Manual - Page 2
STi-R Installation Manual A Radar/Laser Receiver B Radar/Laser Receiver Cable 1 Determine the best location for the Receiver. The best location is typically under the bumper, or inside the front grill of the vehicle. For the best performance, install the Receiver the driver's position. 2 Install
-
1 -
2
 |
 |
Important Notes
STi-R Comes Complete
Read This First
Please read both sides of these
instructions before starting your
installation.
To get the best performance
possible, the mounting location of
the front Radar and Laser Receiver
is critical.
Although radar signals
will pass through some types of
plastic, it is critical that this
receiver be mounted level, and
have an unobstructed “view” of
the road.
Performance
Warning
1
A professional installer must
install your new STi-R.
Installation of this system requires
experience and expertise in
automotive electronics. Car Audio
specialists and many car dealers
can install STi-R for you.
2
Attempting to install this
product without expertise in
automotive electronics
installation can cause personal
injury, or damage to your vehicle.
3
If your vehicle is damaged
during installation, its safety
systems may be compromised,
which could cause personal injury
or property damage.
4
Improper installation may void
STi-R’s warranty.
Important Installation
Warnings
Front Radar Receiver
• Weather-proof Front Radar and
Laser Receiver
• Mounting bracket with stainless
steel hardware
• Built-in 6 foot shielded cable with water
proof connector
• 13 foot shielded cable with in-line
waterproof connector
• Wire ties to secure cable
Miniature Controller
• Controller mounts easily to console for
easy to reach access
Miniature Display
• Miniature Display easily mounts to
instrument pod, dashboard or console
• In-Dash trim bezel allows custom in-dash
installation
Interface
• Central module connects to switched
12-volt power and ground
• All components plug directly in using
modular connections
• 3M connector taps into existing vehicle
wiring
Documentation
• Comprehensive Owner’s Manual
• Installation Manual
Built-in Diagnostics
• Confirms all components are operational
Beltronics
5442 West Chester Road
West Chester OH 45069
Customer Service 800-341-2288
www.beltronics.com
©2007 BELTRONICS, STi-R, TotalShield Technology and AutoScan are trademarks of BELTRONICS USA Inc.
Safety Warning System is a registered trademark of Safety Warning System L.L.C.
DIGITAL RADAR
•
LASER
•
SAFETY DETECTOR
Installation Manual