Beltronics Vector 945 Owner's Manual - Page 10

Windshield Mounting, Visor Mounting

Get Beltronics Vector 945 PDF manuals and user guides View all Beltronics Vector 945 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

Installation WINDSHIELD MOUNTING 1 Remove the mounting bracket cover on top of the unit by pressing on the raised dots and pushing outward. Store the cover in a safe place. 2 Clean the selected windshield area, position the suction-cup mount on the windshield, and press firmly on each suction cup to secure it in place. 3 Use a screw driver or a small coin to adjust the angle of the suction-cup mount until the base plate is level. 4 Slide detector onto base plate unit, it snaps into place. Note: Some vehicles (including some Porsches) have a plastic coating on the inside of the windshield designed to protect occupants in case of an accident. Use of the windshield bracket on this type of windshield can permanently mark the surface. Check with your dealer if you are unsure whether your vehicle is equipped with this type of windshield. VISOR MOUNTING 1 Remove the mounting bracket cover by pressing on the raised dots and pushing outward. Store the cover in a safe place. 2 Slide the visor clip onto the top of the detector until is snaps into place. Clip the detector to the edge of the sun visor nearest the windshield. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
Installation
WINDSHIELD MOUNTING
1
Remove the mounting bracket cover
on top of the unit by pressing on the
raised dots and pushing outward. Store
the cover in a safe place.
2
Clean the selected windshield area,
position the suction-cup mount on the
windshield, and press firmly on each
suction cup to secure it in place.
3
Use a screw driver or a small coin to
adjust the angle of the suction-cup mount
until the base plate is level.
4
Slide detector onto base plate unit, it
snaps into place.
Note: Some vehicles (including some
Porsches) have a plastic coating on the
inside of the windshield designed to
protect occupants in case of an accident.
Use of the windshield bracket on this type
of windshield can permanently mark the
surface. Check with your dealer if you
are unsure whether your vehicle is
equipped with this type of windshield.
VISOR MOUNTING
1
Remove the mounting bracket cover
by pressing on the raised dots and
pushing outward. Store the cover in a
safe place.
2
Slide the visor clip onto the top of
the detector until is snaps into place.
Clip the detector to the edge of the sun
visor nearest the windshield.
7