Beltronics Vector 945 Owner's Manual - Page 9
Installation - radar detector
View all Beltronics Vector 945 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Installation POWER CONNECTION To power V945, plug the elbow shaped jack into the receptacle on the side of the detector; the opposite end of the cord connects to the cigarette barrel. Plug the cigarette barrel into your vehicle's cigarette plug. MOUNTING LOCATION WARNING: BELTRONICS cannot anticipate the many ways V945 can be mounted. It is important that you mount V945 where it will not impair your view nor present a hazard in case of an accident. V945 operates on 12 volts DC negative ground only. The lighter plug provided is a standard size and will work in most vehicles. Of course, your lighter socket must be clean and properly connected for proper operation. Note: depending on your vehicle, the lighter socket power may either be continuously on, or it may be switched on and off with your ignition switch. In case your vehicle has continues power, remember to remove power cord from lighter socket when unit is not in use. Where to mount VECTOR 945 For optimum detection performance, we recommend the following: • Using the Windshield Mount, mount your V945 level, and high enough on your front windshield to provide a clear view of the road from the front and rear. • Mount V945 away from windshield wipers, other solid objects, and heavily tinted areas that might obstruct the radar antenna or laser lens. 6