Beltronics Vector 995 Owner's Manual - Page 4

31160_Vec995_OMrev 8/10/10 1:46 PM Page 7 Quick Reference Guide To begin using your V995, just follow these simple steps 1 Plug the small end of the power cord into the side jack of the detector, and plug the large end of the power cord into your car's lighter socket. 2 Mount your V995 on the windshield using the supplied windshield mount. 3 Press the PWR button, located top left, to turn the V995 on. 4 Press and hold the Volume/Mute button to adjust the volume. Please read the manual to fully understand V995's operation and features. QuickMount Slot Insert V995's adjustable Windshield mount into this slot. Page 7 QuickMount Button Press the button, and slide the Windshield mount into one of its four locking positions. Page 7 City Button Switches between AutoScan, City and Highway, settings. In general, we recommend AutoScan. Page 9 Power Press the PWR button to turn the V995 on or off. Volume Press and hold the Volume/Mute button to adjust the alert volume level. Page 8 AutoMute V995's patented AutoMute automatically reduces the volume level of the audio alert after a brief period. If you prefer, you can turn AutoMute off. Page 8 Programming V995 is ready to go, just plug it in and turn it on. But you can also easily change 7 features for your preferences. Page 12-16 4 Radar Antenna and Laser Lens The rear panel of your V995 should have a clear view of the road ahead. For best performance, do not mount V995 directly behind windshield wipers or tinted areas. Page 6 Alphanumeric Matrix Display V995's display will show Highway, AutoScan, or City as its power-on indication. If you prefer, you can choose other poweron indications. Page 12-14 During an alert, the display will indicate radar band, and a precise bar graph of signal strength. Page 11 Note: In the Dark Mode the display will not light during an alert. Page 9 Rear Laser Port Receives laser signals from behind the vehicle. Earphone Jack Accepts standard mono 3.5mm earphone. Brightness Button Press to adjust display brightness. There are three brightness settings, plus Dark Mode. In the Dark Mode, the power-on indication will be changed to a "AD," "HD," or "CD" (indicating AutoScan, Dark, Highway Dark, or City Dark). In the Dark Mode, V995's meter will not display during an alert, only the audio will alert you. Page 9 Power Jack Plug the power cord into this connector. Page 6 Mute Button Briefly press this button (above the display) to silence the audio for a specific alert. (The audio will alert you to the next encounter.) Page 8 5