BenQ 0.6 Wall Mount Wall Mount User Manual
BenQ 0.6 Wall Mount Manual
 |
View all BenQ 0.6 Wall Mount manuals
Add to My Manuals
Save this manual to your list of manuals |
BenQ 0.6 Wall Mount manual content summary:
- BenQ 0.6 Wall Mount | Wall Mount User Manual - Page 1
follow the instructions in this installation guide carefully before projector wall mounting bracket must only be installed by service professionals. 5. At least two persons are required damage to the threads. 12. The wall mounting bracket can support a maximum projector weight of 12kg or 26.46lbs. 13. - BenQ 0.6 Wall Mount | Wall Mount User Manual - Page 2
(B) or adjust the distance of the projection. Specifications/Size/Guide sheet for hole drilling P.6 Installation Steps P.7 1. Installing secure the socket head screw M6 x L8 (E) in the holes of the projector main support member (P) and the wall bracket (O) by using a 5mm hex wrench (K). It is - BenQ 0.6 Wall Mount | Wall Mount User Manual - Page 3
H Socket head screw (M6 x L12)__2pcs I Screw with fixed washer__4pcs L Height adjustment collar__4pcs M Hex wrench (Allen Key) (5mm)__1pc N Cap for projector main support member__1pc O Upper plastic cover__1pc Lower plastic cover__1pc P Wall bracket__1pc 4 Packaged parts Projector main - BenQ 0.6 Wall Mount | Wall Mount User Manual - Page 4
Required Tools 1. Power drill 2. Drill bit 3. Hammer 4. Spanner: 8mm / 10mm 5. Cross (Phillips) screwdriver 6. Pencil English Angle Adjustment 1. Adjust the mounting brack+e-t arm of the projector to ±5°. 2. Adjust the rotation angle of the sides of the projected image. 3. Adjust the angular - BenQ 0.6 Wall Mount | Wall Mount User Manual - Page 5
Rotation angle +/-10˚ 200mm 89.6mm Load 12kg (26.46lbs) Screw M4 9-Ø5 Tilt angle +/-10° Guide sheet for hole drilling Please visit www.benq.com for the latest guide sheet for hole drilling Connection plate A Mark A ==> MX880UST Mark B ==> MX850UST / MW851UST Connection plate B Mark - BenQ 0.6 Wall Mount | Wall Mount User Manual - Page 6
") deep. B. Fasten the bracket to the wall with the self-tapping screws (C) provided. B C. Push the power cord into the front end of the projector main support member and pull it out at the back. D. Insert and secure the hex socket cap screw M6 x L8 (E) in the holes of the projector main - BenQ 0.6 Wall Mount | Wall Mount User Manual - Page 7
English Installation Steps 5. Adjusting the projection angle A. By adjusting the tightness of the socket head screw (G) using the hex wrench (K), you can adjust the desired angle of the projector cantilever. Tighten the socket head screw (E) by using a 5mm hex wrench (K), then replace the upper
-
1 -
2 -
3 -
4 -
5 -
6 -
7
 |
 |
2
Warning
English
1.
Please read and follow the instructions in this installation guide carefully before
installation and retain them for future reference.
2.
The BenQ Corporation is not liable for any damage or injury resulting from
incorrect installation.
3.
The wall mounting bracket is designed for easy installation and removal. The
BenQ Corporation accepts no liability for any damage or injuries due to human
action or from natural causes, such as an earthquake or typhoon.
4.
This projector wall mounting bracket must only be installed by service
professionals.
5.
At least two persons are required for the installation or removal of this bracket to
prevent personal injury, or material damage from heavy falling objects.
6.
To ensure proper ventilation, install the projector with sufficient clearance
between it and the wall and ceiling.
7.
To ensure safe installation and avoid accidents, check the wall structure and select
a solid durable location.
8.
The wall should be strong enough to support four times the total weight of the
projector and the wall mounting bracket, or more. It should also be of sufficient
strength to bear the force of vibrations from earthquakes or other events.
9.
Check the surroundings of the mounting location before installation.
•
Do not install in places where the temperature or humidity is high and avoid
moisture.
•
Do not install near an air conditioner or vents, or in excessively dusty or oily
places.
•
This product must only be installed on a vertical wall, not a slanting one.
•
Do not install in places subject to vibration or shock.
•
Keep the projector out of direct sunlight
10.
Do not replace any parts or use damaged parts. Please contact your retailer if you
have any questions.
11.
Fix the screws tightly but not excessively to avoid breakage or damage to the
threads.
12.
The wall mounting bracket can support a maximum projector weight of 12kg or
26.46lbs.
13.
Nothing extra must be added to the load on the wall mounting bracket. Nothing
should be attached or hung from it.
14.
Holes for the screws will remain in the walls after the projector mounting bracket
has been removed and marks may also result from long term use.
Warning