BenQ BenQ MX764 DLP Projector MX763/MX764 User Manual
BenQ BenQ MX764 DLP Projector Manual
 |
View all BenQ BenQ MX764 DLP Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
BenQ BenQ MX764 DLP Projector manual content summary:
- BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 1
MX763/MX764 Digital Projector User Manual Welcome - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 2
54 Direct power off 55 Menu operation 56 Maintenance 66 Care of the projector 66 Lamp information 67 Troubleshooting 73 Specifications 74 Projector specifications 74 Dimensions 75 Ceiling mount installation 75 Timing chart 76 Warranty and Copyright information 79 2 Table of contents - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 3
this could cause the objects to become heated and deformed or even cause a fire. To temporarily turn off the lamp, press BLANK on the projector or remote control. 4. Always open the lens shutter (if any) or remove the lens cap (if any) when the projector lamp is on. Important safety instructions 3 - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 4
should you ever undo or remove any other covers. Refer servicing only to suitably qualified professional service personnel. 9. Never replace the lamp assembly or any electronic components unless the projector is unplugged. 12. When the projector is under operation, you may sense some heated air - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 5
it is not fully horizontal may cause a malfunction of, or damage to, the lamp. 3000 m (10000 feet) 0 m (0 feet) 16. Do not stand the projector on end vertically. Doing so may cause the projector to fall over, causing injury or resulting in damage to the projector. Important safety instructions 5 - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 6
projector. Liquids spilled into the projector may cause it to fail. If the projector does become wet, disconnect it from the power supply's power outlet and call BenQ to have the projector serviced the projector should its attachment to the mounting bracket become loose. Hg - Lamp contains mercury - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 7
narration, and sound effects of TV programs and videos • Variable audio output • Wall color correction projector cool in a shorter time • FAQ to troubleshoot operational problems with one quick key press lamp brightness will decline over time and may vary within the lamp manufacturers specifications - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 8
card is only supplied in some specific regions. Please consult your dealer for detailed information. Projector Power cord VGA cable Quick start guide User manual CD Warranty card* Remote control with batteries Optional accessories 1. Spare lamp kit 2. Ceiling mount kit Soft carry case - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 9
Projector exterior view Front/upper side 1 2 3 4 Rear/lower side .) Lamp cover Vent (heated air exhaust) Lens cover Focus ring and Zoom ring Vent (cool air intake) Front IR remote sensor jack RGB (PC)/Component Video (YPbPr/ YCbCr) signal input jack S-Video input jack Video input jack Audio (L/R) - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 10
the projector is under operation. 4. Top IR remote lamp has developed a problem. AUTO Automatically determines the best picture timings for the displayed image. Keystone/Arrow keys ( / Up, / Down) Manually corrects distorted images resulting from an angled projection. Right/ Increases the projector - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 11
Remote projector between standby mode Displays the source selection bar. and on. 14. AUTO 2. Source selection buttons (COMPUTER-1, COMPUTER-2, VIDEO, S-VIDEO . 4. BLANK Used to hide the screen image. 5. Left Manually corrects distorted images resulting from an angled projection. 16. Right When - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 12
VOLUME+/VOLUMEAdjusts the sound level. 19. MUTE Toggles projector audio between on and off. 20. ASPECT Selects press and hold LASER for continuous output. Do not look into the laser light window or shine the laser light beam on yourself or others. See the warning messages on the back of the remote - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 13
that might obstruct the infra-red beam. • Operating the projector from the front • Operating the projector from the top Approx. +15º Approx. +15º Replacing the remote control batteries 1. To open the battery cover, turn the remote control over to view its back, push on the finger grip on - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 14
is the suspended upside-down from the ceiling most common way to position the projector behind the screen. for quick setup and portability. Note that a special rear projection screen and the BenQ Projector Ceiling Mount Kit are required for this installation location. Set Rear Ceiling in the - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 15
. There is 3% tolerance among these numbers due to optical component variations. BenQ recommends that if you intend to permanently install the projector, you should physically test the projection size and distance using the actual projector in situ before you permanently install it, so as to make - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 16
lens within the allowable range depending on your desired image position. To shift the projection lens, open the flap on the side of the projector to expose an access (a deep hole) to the lens shift device. Insert a screwdriver to touch the device, and then rotate the screwdriver clockwise or - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 17
, some cables may not be included with the projector (see "Shipping contents" on page 8). They Video cable 2. VGA to DVI-A cable 7. Audio L/R cable 3. USB cable 8. Audio cable 4. Component Video to VGA (D-Sub) 9. Microphone adapter cable 10. USB flash drive/USB wireless dongle 5. S-Video - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 18
notebooks do not turn on their external video ports when connected to a projector. Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate a function key labeled CRT/LCD or a function key with a monitor symbol on the notebook. Press FN and the labeled function key - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 19
• You can use a wireless microphone as long as a wireless module is attached to the projector's microphone input jack and it works well with the associated devices. To ensure a quality use of the wireless microphone, it is recommended that your microphone conforms to the specifications listed in the - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 20
• You might get feedback noise from the microphone when you are too close to the speaker of the projector. Move the microphone away from the speaker of the projector. The greater volume you require, the greater distance you need to be away from the speaker to prevent the noise. 20 Connection - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 21
shock and fire. 2. Press POWER on the projector or ON on the remote control to start the projector. As soon as the lamp lights up, a " lamp. 3. If the projector is activated for the first time, select your OSD language following the onscreen instructions. 4. If you are prompted for a password, press - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 22
the lamp may cause damage to your eyes. Be careful when you press the quick-release button as it is close to the exhaust vent where hot air comes from. Auto-adjusting the image In some cases, you may need to optimize the picture quality. To do this, press AUTO on the projector or remote control - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 23
menu is On. Or you will need to manually correct it following ONE of these steps. • Using the remote control Press / on the projector or remote control to display the Keystone correction page. Press to correct keystoning at the top of the image. Press to correct keystoning at the bottom of the - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 24
Color Splash Screen My Screen Analog RGB English Front Table Front+Top Off BenQ BenQ MENU Exit 4. Press MENU/EXIT twice* on the projector or remote control to leave and save the settings. *The first press leads you back to the main menu and the second press closes the OSD menu. 24 Operation - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 25
manual (if necessary) and write the password you used in this manual, and keep the manual in a safe place for later recall. Setting a password Once a password has been set and the power on lock is activated, the projector Screen Lock use the same password. press the arrow keys to enter six digits - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 26
Press and hold AUTO on the projector or RECALL PASSWORD remote control for 3 seconds. The projector will display a coded number on the screen. 2. Write down the number and turn off your projector. 3. Seek help from the local BenQ service password down here in this manual in advance or right after - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 27
to enter the password next time when turning on the projector. Press to highlight Splash Screen Lock and press / to select Off. The Splash Screen function in the message "INPUT PASSWORD" is displayed for your retry. You can press MENU/EXIT to cancel the change or try another password. Though the - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 28
Press SOURCE on the projector or remote control. A source selection bar is displayed. 2. Press / until your desired signal is selected and press "Video" using mostly moving images (movies). HDMI Video S-Video Network Display USB Display USB Reader • The native display resolution of this projector - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 29
is suitable for your need. 2. Use the directional arrows ( , , , ) on the projector or remote control to navigate the picture. 3. To restore the picture to its original size, press AUTO. You can also press ZOOM-. When the key is pressed again, the picture is further reduced until it is restored to - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 30
can be displayed on those unused black areas. 1. Auto: Scales an image proportionally to fit 4. 16:9: Scales an image so that it is the projector's native resolution in its displayed in the center of the horizontal or vertical width. This is suitable screen with a 16:9 aspect ratio. for the - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 31
need, you can follow one of the following steps. • Press MODE/ENTER on the projector or remote control repeatedly until your desired mode is selected. • Go movies, video clips from digital cameras or DVs through the PC input for best viewing in a blackened (little light) environment. 5. User 1/User 2 - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 32
user-definable functions available when User 1 or User 2 is selected. Based on your needs, you can make adjustments to these functions by highlighting them and pressing / on the projector or remote , which are common in video and natural scenes, so the projector reproduces images in realistic and - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 33
. To adjust the settings: 1. Go to the PICTURE menu and highlight 3D Color Management. 2. Press MODE/ENTER on the projector or remote control and the 3D Color Management page is displayed. 3. Highlight Primary Color and press / to select a color from among Red, Yellow, Green, Cyan, Blue, or Magenta - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 34
be produced when the timer is up. 7. To activate the presentation timer, press and press / to highlight On and press MODE/ENTER. 8. A confirmation message is displayed. Highlight Yes and press MODE/ENTER on the projector or remote control to confirm. You will see the message "Timer is On" displaying - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 35
the function, press any key on the projector or remote control. If your remote control has the following keys, please note that they cannot be pressed to release the function: LASER, #1, #4, PAGE UP/PAGE DOWN. Even if an image is frozen on the screen, the pictures are running on the video or other - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 36
SYSTEM SETUP: Basic > Panel Key Lock menu, and select On by pressing / on the projector or remote control. A confirmation message is displayed. 2. Highlight Yes and press MODE/ENTER to confirm. To release panel key lock, use the remote control to enter the SYSTEM SETUP: Basic > Panel Key Lock menu - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 37
SYSTEM SETUP: Advanced menu is highlighted. 2. Press to highlight Audio Settings and press MODE/ENTER. The Audio Settings page is displayed. 3. Highlight Mute and press / to select On. If available, you can also press MUTE on the remote control to toggle projector audio between on and off. Adjusting - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 38
to the RJ45 LAN input jack of the projector and the other end to the RJ45 port on your Ethernet or router. 2. Do one of the following: • Press NETWORK SETTING on the remote control. The Network Settings page is displayed. • Press MENU/EXIT and then press / until the SYSTEM SETUP: Advanced menu is - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 39
to the projector wirelessly, you have to plug a BenQ wireless dongle (optional) to the USB Type A connector on the projector, and then only a few OSD configuration steps are required. 1. Make sure the projector is turned on. 2. Do one of the following: • Press NETWORK SETTING on the remote control - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 40
for how to connect the projector. • There are more wireless settings available on the Projector Network display System > Admin > Wireless LAN page. • If you need more information about AP and Infrastructure modes, please refer to user documentations for Wireless Routers which are usually available - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 41
is version 7.0 or higher. • The screenshots in this manual are for reference only, and may differ from the actual design. 1. Enter the address of the projector in the address bar of your browser and press Enter. 2. The main page of the Projector Network Display System appears. This web page provides - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 42
keypad with which you can control the projector as if using the physical keypad on the projector. See "Projector" on page 10 for how to operate it. 5. The Display Setting page provides some selective OSD menu items necessary for controlling the projector or adjusting the projected pictures. See the - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 43
6. The Picture Setting page provides all the OSD menu items in the PICTURE menu for adjusting the projected pictures. See "2. PICTURE menu" on page 60 for how to use them. 7. The Information page displays the information about the projector status, network status. Operation 43 - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 44
(eControl) page displays the Crestron eControl user interface. The eControl page provides a variety of virtual keys to control the projector or adjust the projected pictures. i ii i i iii i. These buttons function the same as the ones on the OSD menus or remote control. See "2. PICTURE menu" on - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 45
Send button and the data will be saved in the projector. v. Press exit to go back to the remote network operation page. The info page displays the information and status of this projector. Press Exit to go back to the remote network operation page. For more information, visit http://www.crestron - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 46
10. To have access to the Admin page, you need to enter a password. The page provides more network settings. The default password is "0000". If you want to change the password, enter the Basic page. The Basic page allows you to change the password and set the maximum number of connected computers. - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 47
The Wired LAN page allows you to adjust the Wired LAN settings. The Wireless LAN page allows you to adjust the Wireless LAN settings. The maximum length for SSID is 16 bytes. Please use different SSID when more than two projectors are connecting through wireless LAN. Operation 47 - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 48
Display System. To enable the function: 1. After your computer is connected to the projector, enter the address of the projector in the address bar of your browser and press Enter. 2. Go to the Admin page of the Projector Network Display System. 3. Enter the current password. 4. Click ON in the Web - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 49
Security Settings page. Press to highlight Web Control Lock and press / to select On instructions to complete the installation. 4. Launch QPresenter. Using QPresenter 1 3 &4 2 5 1. The Search page allows you to search and connect to a projector. • To connect to a projector, type the projector - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 50
, click Pause. • If there are multiple computers connected to the projector, you can decide a display location by clicking 1, 2, 3, 4, Remote Desktop function, click Yes. Type the name and password for your computer. Go to the projector OSD menu SYSTEM SETUP: Advanced > Network Settings > Remote - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 51
from the projector(s), click the Disconnect icon. • Be sure to turn off other virtual network control programs before using QPresenter. • Firewall in the PC must be switched off to allow QPresenter and USB Display to work. • Wireless keyboard mouse combo is not supported by Pixelworks currently - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 52
sources manually. To activate this function: The function requires special version of the QPresenter. Please download it from your User projector. 2. Press SOURCE and select USB Display in the source bar. 3. Go to My Computer on you PC and double-click the BenQ QPresenter icon. 4. The projector - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 53
displays a slide show of images stored on a USB flash drive connected to the projector. It can eliminate the need for a computer source. Supported image formats: • JPEG(JPG) • BMP • PNG • GIF • TIFF • PDF • A square box will be displayed on the filename for unidentified characters. • Thai - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 54
POWER on the projector or OFF on the remote control, and a confirmation message will be displayed prompting you. If you don't respond in a few seconds, the message will disappear. 2. Press POWER a second time. The POWER indicator light flashes orange, the projection lamp shuts down, and the fans - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 55
/Off Ring Tone" on page 37 for details. • If the projector is not properly shut down, to protect the lamp, when you attempt to re-start the projector, the fans will run for a few minutes to cool down. Press POWER again to start the projector after the fans stop and the POWER indicator light turns - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 56
screen display (OSD) menus vary according to the signal type selected and the projector model you are using. Main menu Sub-menu Options Wall Color Off/Light Coordinate Chart Picture Mode Dynamic/Presentation/sRGB/Cinema/User 1/User 2 Reference Mode Dynamic/Presentation/sRGB/Cinema Brightness - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 57
4. SYSTEM SETUP: Basic 5. SYSTEM SETUP: Advanced Projector Position Front Table/Rear Table/Rear Ceiling/Front Ceiling /4 hr/8 hr/12 hr Remote Receiver Front+Top/Front/Top Panel Key Lock On/Off Background Color Black/Blue/Purple/BenQ Splash Screen Black/Blue/BenQ/My Screen My Screen High - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 58
Advanced Apply Status Network Wireless LAN SSID IP Address Settings Connection Mode Account Remote Desktop Password Connect Projection Log • Color System • Equivalent Lamp Hour • Firmware Version Note that the menu items are available when the projector detects at least one valid - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 59
values shown on the lower position of the page change with every key press you made until they reach their maximum or minimum. This function is page 29 for details. This projector features a 3D function which enables you to enjoy the 3D movies, videos, and sporting events in a problem. Operation 59 - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 60
Press MODE/ENTER to display the selected pattern. Picture Mode Reference Mode Brightness Contrast Color Tint Sharpness Brilliant Color Pre-defined picture modes are provided so you can optimize your projector when a Video or S-Video signal is User 1 or User 2 mode. 2. PICTURE menu 60 Operation - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 61
on page 34 for details. Language Sets the language for the On-Screen Display (OSD) menus. See "Using the menus" on page 24 for details. Projector Position The projector can be installed on a ceiling or behind a screen, or with one or more mirrors. See "Choosing a location" on page 14 for details - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 62
once the power is fed through the power cord. Signal Power On Sets whether to turn the projector directly on without pressing the POWER key on the projector or ON on the remote control when the projector is in standby mode and the signal is feed through the VGA cable. Auto Power Off Allows - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 63
Receiver Description Allows you to enable all the remote receivers or one specific remote receiver on the projector. Panel Key Lock Background Color Disables or enables all panel key functions except POWER on the projector and keys on the remote control. See "Locking control keys" on page 36 - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 64
projector using a suitable RS-232 cable and update or download the projector's firmware. This function is intended for qualified service personnel. Selecting On enables the function and the projector narration, and sound effects of TV programs and videos that are closed captioned (usually marked as " - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 65
H. Size, User 1, User 2, Color Space Conversion, Language, Projector Position, High Altitude Mode, Security Settings, DHCP, SSID, Remote Desktop and RGB. Equivalent Lamp Hour Displays the number of hours the lamp has been used. Firmware Version Shows the firmware version of your projector. 6. - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 66
the instructions below: • Make sure the temperature and humidity of the storage area are within the recommended range for the projector. Please refer to "Specifications" on page 74 or consult your dealer about the range. • Retract the adjuster feet. • Remove the batteries from the remote control - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 67
light output will be reduced and result in darker projected pictures. Setting the projector in Economic mode also extends the lamp operation life. To set Economic mode, go into the SYSTEM SETUP: Advanced > Lamp Settings > Lamp Mode menu and press / . • Setting Auto Power Off This function allows the - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 68
Order a new lamp at lamp.benq.com OK Notice Replace Lamp Now Lamp>XXXX Hours Order a new lamp at lamp.benq.com OK The lamp MUST be replaced before the projector will operate normally. Press ENTER to dismiss the message. WARNING Out of Lamp Usage Time Replace lamp (refer to User Manual) Then reset - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 69
hazardous waste regulations to dispose of this lamp in a proper manner. • To assure optimal performance from the projector, it is recommended that you purchase a qualified projector lamp for lamp replacement. • If lamp replacement is performed while the projector is suspended upside-down from the - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 70
could result in malfunction. • Do not over tighten the screw. 10. Ensure the handle is fully laid flat and locked in place. 2 11. Place the lamp protection film supplied with the new lamp on the lamp compartment. 12. Replace the lamp cover on the projector. 1 70 Maintenance - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 71
Lamp Settings menu. Press MODE/ENTER. The Lamp Settings page is displayed. Highlight Reset lamp timer. A warning message is displayed asking if you want to reset the lamp timer. Highlight Reset and press MODE/ENTER. The lamp time will be reset to "0". Do not reset if the lamp is not new or replaced - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 72
needs to cool for 90 seconds after the power is turned off. • The projector has shut down automatically. If you try to restart the projector, it will shut down again. Please contact your dealer for assistance. Lamp events The projector has shut down automatically. If you try to reRed start the - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 73
as well as the height of the projector if necessary. Open the lens cover. Remedy Replace the batteries with new ones. Remove the obstacle. Stand within 8 meters (26 feet) of the projector. Remedy Please see "Entering the password recall procedure" on page 26 for details. Troubleshooting 73 - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 74
Specifications Projector specifications All specifications are subject to change without notice. Optical Control Resolution 1024 x 768 XGA Display system 1-CHIP DMD Lens F/Number F = 2.45 Lamp 300 W lamp -pin (female) x 2 Video signal input S-VIDEO Mini DIN 4-pin port x 1 VIDEO RCA jack x 1 SD/ - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 75
Dimensions 339 mm (W) x 120.5 mm (H) x 252 mm (D) 252 120.5 Ceiling mount installation Ceiling Mount screw: M4 x 8 (Max L = 8 mm) 339 42 50.5 242.04 149.50 84 Unit: mm 228 87 448 397.40 364.40 130 191 339 133 237.4 Specifications 75 - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 76
1152 x 870@75Hz MAC21 75.06 68.68 100.00 *Supported timing for non-3D and 3D signal with Frame Sequential and Top-Bottom format. **Supported timing for non-3D and 3D signal with Frame Sequential format. ***Supported timing for non-3D and 3D signal with Top-Bottom format. 76 Specifications - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 77
1152 x 870@75Hz MAC21 75.06 68.68 100.00 *Supported timing for non-3D and 3D signal with Frame Sequential and Top-Bottom format. **Supported timing for non-3D and 3D signal with Frame Sequential format. ***Supported timing for non-3D and 3D signal with Top-Bottom format. Specifications 77 - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 78
in slight image vibration. **Supported timing for non-3D and 3D signal with Frame Sequential format. Supported timing for Video and S-Video inputs Video mode NTSC** PAL SECAM or 4.41 3.58 3.58 4.43 4.43 **Supported timing for non-3D and 3D signal with Frame Sequential format. 78 Specifications - BenQ BenQ MX764 DLP Projector | MX763/MX764 User Manual - Page 79
replacement of any defective parts (labor included). To obtain warranty service, immediately notify the dealer from which you purchased the product of any defects. Important: The above warranty shall be void if the customer fails to operate the product in accordance with BenQ's written instructions
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
 |
 |
Welcome
MX763/MX764
Digital Projector
User Manual