BenQ EX2710Q Resolution file

1

Adjusting the screen resolution

Due to the nature of liquid crystal display (LCD) technology, the picture resolution is always fixed. For

the best display performance, please set the display to its maximum resolution that is the same with the

monitor aspect ratio. This is called “Native Resolution” or maximal resolution – that is, the clearest

picture. Please refer to the table below for the native resolution of your LCD. Lower resolutions are

displayed on a full screen through an interpolation circuit. Image blurring across pixel boundaries can

occur with the interpolated resolution depending upon the image type and its initial resolution.

1.

Open

Display Properties

and select the

Settings

tab.

You can open

Display Properties

by right-clicking on the Windows desktop and selecting

Properties

from

the pop-up menu.

2.

Use the slider in the

Screen area

section to adjust the screen resolution.

Select the recommended resolution (maximum resolution) then click

Apply

.

3.

Click

OK

then

Yes

.

4.

Close the

Display Properties

window.

If your input source does not provide an image which is the same with the monitor aspect ratio, the

displayed image may appear stretched or distorted. To maintain the original aspect ratio, image scaling

options can be found in the

Display Mode

adjustment. See the user manual for more information.

Adjusting the screen refresh rate

You don’t have to choose the highest possible refresh rate on an LCD display, because it is not technically

possible for an LCD display to flicker. The best results are obtained by using the factory modes already

set in your computer. Check next chapter to see the factory modes:

Preset display models on page 2

.

1.

Double click the

Display

icon in

Control Panel

.

2.

From the

Display Properties

window, select the

Settings

tab and click the

Advanced

button.

3.

Select the

Adapter

tab, and select an appropriate refresh rate to match one of the applicable factory

modes as listed in the specification table.

4.

Click

Change

,

OK

, then

Yes

.

5.

Close the

Display Properties

window.

• To take full advantage of LCD technology you should select the native resolution setting of your PC screen as

described below. Be aware that not all PC video cards provide this resolution value. If yours doesn't, check with the

video card manufacturer's website for an updated driver for your particular model PC video card which supports

this resolution. Software video drivers are often updated and available for new hardware video resolutions. If

necessary, you may need to replace and update the PC video card hardware to be able to support the native

resolution of the monitor.

• Depending on the operating system on your PC, different procedures should be followed to adjust the screen

resolution. Refer to the help document of your operating system for details.

If you select some other resolution, be aware that this other resolution is interpolated and may not accurately display

the screen image as well as it could do at the native resolution setting.

Depending on the operating system on your PC, different procedures should be followed to adjust the screen

resolution. Refer to the help document of your operating system for details.