BenQ MS500 MS500 User Manual
BenQ MS500 Manual
 |
View all BenQ MS500 manuals
Add to My Manuals
Save this manual to your list of manuals |
BenQ MS500 manual content summary:
- BenQ MS500 | MS500 User Manual - Page 1
MX501/MS500/MX501-V/MS500-V Digital Projector User Manual Welcome - BenQ MS500 | MS500 User Manual - Page 2
Shutting down the projector 33 Direct power off 34 Menu operation 35 Maintenance 44 Care of the projector 44 Lamp information 45 Troubleshooting 51 Specifications 52 Projector specifications 52 Dimensions 53 Ceiling mount installation 53 Timing chart 54 Warranty and Copyright information - BenQ MS500 | MS500 User Manual - Page 3
that you connect your projector through a power stabilizer, surge protector or 2. Do not look straight at the projector uninterruptible power supply (UPS). lens during operation. The intense light beam may damage your eyes. 3. Refer servicing to qualified service personnel. 6. Do not block - BenQ MS500 | MS500 User Manual - Page 4
should you ever undo or remove any other covers. Refer servicing only to suitably qualified professional service personnel. 9. Never replace the lamp assembly or any electronic components unless the projector is unplugged. 12. When the projector is under operation, you may sense some heated air - BenQ MS500 | MS500 User Manual - Page 5
it is not fully horizontal may cause a malfunction of, or damage to, the lamp. 3000 m (10000 feet) 0 m (0 feet) 16. Do not stand the projector on end vertically. Doing so may cause the projector to fall over, causing injury or resulting in damage to the projector. Important safety instructions 5 - BenQ MS500 | MS500 User Manual - Page 6
the power supply's power outlet and call BenQ to have the projector serviced. 19. This product is capable of displaying inverted images for ceiling mount installation. Use only BenQ's Ceiling Mount Kit for mounting the projector and ensure it is securely installed. Ceiling mounting the projector We - BenQ MS500 | MS500 User Manual - Page 7
password protected function • 3D color management allowing color adjustments to your liking • Selectable quick cooling function making the projector cool in a shorter distance. • The lamp brightness will decline over time and may vary within the lamp manufacturers specifications. This is normal and - BenQ MS500 | MS500 User Manual - Page 8
supplied in some specific regions. Please consult your dealer for detailed information. Projector Power cord VGA cable Quick start guide User manual CD Warranty card* Remote control with battery Pull the tab before using the remote control. Optional accessories 1. Spare lamp kit 2. Ceiling - BenQ MS500 | MS500 User Manual - Page 9
intake) Speaker grill Front IR remote sensor Projection lens AC power jack USB port RGB signal output jack RGB (PC)/Component Video (YPbPr/ YCbCr) signal input jack RS232 control port S-Video input jack Video input jack Audio input jack Audio output jack Ceiling mount holes Front adjuster foot Rear - BenQ MS500 | MS500 User Manual - Page 10
. 3. LAMP indicator light 13. Indicates the status of the lamp. Lights up or flashes when the lamp has developed a problem. 4. MENU Manually corrects distorted images resulting from an angled projection. POWER Toggles the projector between standby mode and on. Right/ Increases the projector - BenQ MS500 | MS500 User Manual - Page 11
Remote control 8. Keystone/Arrow keys ( / Up, / Down) 7 1 Manually corrects SOURCE 1. POWER Displays the source selection bar. 12. MODE/ENTER Toggles the projector between the screen picture. 14. Timer Set up 5. Digital Zoom (+, -) Enters presentation timer setting directly. Magnifies - BenQ MS500 | MS500 User Manual - Page 12
control and the IR sensor on the projector that might obstruct the infra-red beam. • Operating the projector from the front Approx. +15º Replacing the remote control battery 1. Pull out the battery holder. Please follow the illustrated instructions. Push and hold the locking arm while pulling out - BenQ MS500 | MS500 User Manual - Page 13
menu after you turn the projector on. 2. Front Ceiling Select this location with the projector suspended upside-down from the ceiling in front of the screen. Purchase the BenQ Projector Ceiling Mount Kit from your dealer to mount your projector on the ceiling. Set Front Ceiling in the SYSTEM SETUP - BenQ MS500 | MS500 User Manual - Page 14
9132 9434 9906 10377 11321 11887 12453 Vertical offset (mm) • MS500/ • MX501/ MS500-V MX501-V 23 46 30 61 38 76 46 91 61 122 BenQ recommends that if you intend to permanently install the projector, you should physically test the projection size and distance using the actual projector - BenQ MS500 | MS500 User Manual - Page 15
cable 7. Audio cable 4. Component Video to VGA (D-Sub) adapter cable • Many notebooks do not turn on their external video ports when connected to a projector. Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate a function key labeled CRT/LCD or a function - BenQ MS500 | MS500 User Manual - Page 16
1 jack. • If you wish to use this connection method when the projector is in standby mode, make sure the Monitor Out function is turned on in the for details. • If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, check that - BenQ MS500 | MS500 User Manual - Page 17
such as electric shock and fire. 2. Press POWER on the projector or ON on the remote control to start the projector. As soon as the lamp lights up, a "Power On Tone" will be heard. The POWER indicator light flashes green and stays green when the projector is on. The start up procedure takes about - BenQ MS500 | MS500 User Manual - Page 18
the lamp is on. The strong light If the projector is not placed on a flat surface or the from the lamp may cause screen and the projector are the image In some cases, you may need to optimize the picture quality. To do this, press AUTO on the projector or remote control. Within 3 seconds - BenQ MS500 | MS500 User Manual - Page 19
is not perpendicular to the screen. To correct this, you will need to manually correct it following ONE of these steps. • Using the remote control Press / on the projector or remote control to display the Keystone correction page. Press to correct keystoning at the top of the image. Press - BenQ MS500 | MS500 User Manual - Page 20
language. 1. Press MENU/EXIT on the projector or 3. Press to highlight Language remote control to turn the OSD menu on. and press / to select a DISPLAY preferred language. Wall Color Aspect Ratio Keystone Position Phase H. Size Digital Zoom 3D Sync 3D Sync Invert Teaching Template Analog RGB - BenQ MS500 | MS500 User Manual - Page 21
manual (if necessary) and write the password you used in this manual, and keep the manual in a safe place for later recall. Setting a password Once a password has been set and the power on lock is activated, the projector 4 digits (1, 2, 3, 4). According to the password you desire to set, Power On - BenQ MS500 | MS500 User Manual - Page 22
six- digit password, or if you did not record the password in this manual, and projector or remote control for 3 seconds. The projector RECALL PASSWORD will display a coded number on the screen. 2. Write down the number and turn off your projector. 3. Seek help from the local BenQ service - BenQ MS500 | MS500 User Manual - Page 23
password. IMPORTANT: The digits being input will display as asterisks on-screen. Write your selected password down here in this manual in advance or right to highlight Power On Lock and press / to select Off. You will not have to enter the password next time when turning on the projector. Press to - BenQ MS500 | MS500 User Manual - Page 24
size is suitable for your need. 2. Use the directional arrows ( , , , ) on the projector or remote control to navigate the picture. 3. To restore the picture to its original size, press AUTO. You can also press Digital Zoom-. When the key is pressed again, the picture is further reduced until it is - BenQ MS500 | MS500 User Manual - Page 25
With the advent of digital signal processing, digital display devices like this projector can dynamically stretch and an image proportionally to fit 4. 16:9: Scales an image so that it is the projector's native resolution in its displayed in the center of the horizontal or vertical width. This - BenQ MS500 | MS500 User Manual - Page 26
3. 4:3: Scales an image so that it is displayed in the center of the screen with a 4:3 aspect ratio. This is most suitable for 4:3 images like some computer monitors, standard definition TV and 4:3 aspect DVD movies, as it displays them without aspect alteration. 4:3 picture 26 Operation - BenQ MS500 | MS500 User Manual - Page 27
follow one of the following steps. • Press MODE/ENTER on the projector or remote control repeatedly until your desired mode is selected. • Go to the colorful movies, video clips from digital cameras or DVs through the PC input for best viewing in a blackened (little light) environment. 5. User 1/User - BenQ MS500 | MS500 User Manual - Page 28
user-definable functions available when User 1 or User 2 is selected. Based on your needs, you can make adjustments to these functions by highlighting them and pressing / on the projector or remote natural scenes, so the projector reproduces images in realistic and true colors. If you prefer images - BenQ MS500 | MS500 User Manual - Page 29
adjust the settings: 1. Go to the PICTURE menu and highlight 3D Color Management. 2. Press MODE/ENTER on the projector or remote control and the 3D Color Management page displays. 3. Highlight Primary Color and press / to select a color from among Red, Yellow, Green, Cyan, Blue, or Magenta. 4. Press - BenQ MS500 | MS500 User Manual - Page 30
7. Repeat steps 3 to 6 for other color adjustments. 8. Make sure you have made all of the press MODE/ENTER. 8. A confirmation message displays. Highlight Yes and press MODE/ENTER on the projector or remote control to confirm. You will see the message "Timer is On" displaying on the screen. The - BenQ MS500 | MS500 User Manual - Page 31
). When the Panel Key Lock is on, no control keys on the projector will operate except POWER. 1. Go to the SYSTEM SETUP: Basic > Panel Key Lock menu, and select On by pressing / on the projector or remote control. A confirmation message displays. 2. Highlight Yes and press MODE/ENTER to confirm - BenQ MS500 | MS500 User Manual - Page 32
• If you press POWER to turn off the projector without disabling panel key lock, the projector will still be in locked status the next time it is turned on. Operating in a high altitude environment We recommend you use the High Altitude Mode when your environment is between 1500 m -3000 m above sea - BenQ MS500 | MS500 User Manual - Page 33
seconds, the message will disappear. 2. Press POWER a second time. The POWER indicator light flashes orange, the projection lamp shuts down, and the fans will continue to run for approximately 90 seconds to cool down the projector. To protect the lamp, the projector will not respond to any commands - BenQ MS500 | MS500 User Manual - Page 34
off. To protect the lamp, wait about 10 minutes before re-starting the projector. (When you attempt to re-start the projector, the fans may run for a few minutes to cool down. In such cases, press II POWER again to start the projector after the fans stop and the POWER indicator light turns orange - BenQ MS500 | MS500 User Manual - Page 35
Mode Dynamic/Presentation/sRGB/Cinema/User 1/User 2 Reference Mode Dynamic/Presentation/sRGB/Cinema Brightness Contrast Color Tint Sharpness Brilliant Color On/Off Color Temperature Cool/Normal/Warm Primary Color R/G/B/C/M/Y 3D Color Hue Management Saturation Gain Save Settings - BenQ MS500 | MS500 User Manual - Page 36
Sub-menu Options MX501/MX501-V: Language MS500/MS500-V: or 4. SYSTEM SETUP: Basic The supplied languages in MS500/MS500-V may differ by region. Please contact your dealer for further information. Projector Position Front Table/Rear Table/Rear Ceiling/Front Ceiling Menu Display 5 sec/10 sec - BenQ MS500 | MS500 User Manual - Page 37
On/Off Reset All Settings • Source • Picture Mode 6. INFORMATION Current System Status • Resolution • Color System • Equivalent Lamp Hour • Firmware Version Note that the menu items are available when the projector detects at least one valid signal. If there is no equipment connected to the - BenQ MS500 | MS500 User Manual - Page 38
Color Aspect Ratio Keystone Position Phase Description Corrects the projected picture's color when the projection surface is not white. See "Using Wall Color distortion. H. Size Digital Zoom 3D Sync 3D Sync Invert This function projector features a 3D function which enables you to enjoy the 3D - BenQ MS500 | MS500 User Manual - Page 39
selected. See "Adjusting Brilliant Color" on page 28 for details. Color Temperature See "Selecting a color temperature" on page 28 for details. 3D Color Management See "3D Color Management" on page 29 for details. Save Settings Saves the settings made for User 1 or User 2 mode. 2. PICTURE menu - BenQ MS500 | MS500 User Manual - Page 40
menus. See "Using the menus" on page 20 for details. The projector can be installed on a ceiling or behind a screen, or with one or more mirrors. See " Direct Power On Allows the projector to turn on automatically once the power is fed through the power cord. Auto Power Off Allows the projector to - BenQ MS500 | MS500 User Manual - Page 41
Function Description Panel Key Lock Background Color Disables or enables all panel key functions except POWER on the projector and keys on the remote control. See "Locking control keys" on page 31 for details. Sets the background color for the projector. Splash Screen MyScreen (only for MX501 - BenQ MS500 | MS500 User Manual - Page 42
using a suitable RS-232 cable and update or download the projector's firmware. This function is intended for qualified service personnel. Selecting On enables the function and the projector displays the grid test pattern. It helps you adjust the image size and focus and check that the projected - BenQ MS500 | MS500 User Manual - Page 43
the PICTURE menu. Resolution Shows the native resolution of the input signal. Color System Shows input system format: NTSC, PAL, SECAM, YUV, or RGB. Equivalent Lamp Hour Displays the number of hours the lamp has been used. Firmware Version Shows the firmware version of your projector. Operation 43 - BenQ MS500 | MS500 User Manual - Page 44
These can damage the case. Storing the projector If you need to store the projector for an extended time, please follow the instructions below: • Make sure the temperature and humidity of the storage area are within the recommended range for the projector. Please refer to "Specifications" on page 52 - BenQ MS500 | MS500 User Manual - Page 45
darker projected pictures. Setting the projector in Economic mode also extends the lamp operation life. To set Economic mode, go into the SYSTEM SETUP: Advanced > Lamp Settings > Lamp Mode menu and press / . • Setting Auto Power Off This function allows the projector to turn off automatically if no - BenQ MS500 | MS500 User Manual - Page 46
lamp at lamp.benq.com OK Notice Replace Lamp Now Lamp>XXXX Hours Order a new lamp at lamp.benq.com OK The lamp MUST be replaced before the projector will operate normally. Press MODE/ENTER to dismiss the message. WARNING Out of Lamp Usage Time Replace lamp (refer to User Manual) Then reset lamp - BenQ MS500 | MS500 User Manual - Page 47
projector lamp for lamp replacement. • If lamp replacement is performed while the projector is suspended upside-down from the ceiling, make sure that no one is underneath the lamp socket to avoid any possible injury or damage to the human eyes caused by fractured lamp. 1. Turn the power off - BenQ MS500 | MS500 User Manual - Page 48
into the projector after the lamp is removed. If you touch the optical components inside, it could cause color unevenness and Replace the new protection film that comes with the new lamp. 14. Replace the lamp cover on the projector. 1 2 1 3 2 2 15. Tighten the screw that secures the lamp - BenQ MS500 | MS500 User Manual - Page 49
16. Connect the power and restart the projector. Do not turn the power on with the lamp cover removed. Resetting the lamp timer 17. After the startup logo, open the On-Screen Display (OSD) menu. Go to the SYSTEM SETUP: Advanced > Lamp Settings menu. Press MODE/ENTER. The Lamp Settings page displays. - BenQ MS500 | MS500 User Manual - Page 50
cool for 90 seconds after the power Flashing is turned off. • The projector has shut down automatically. If you try to re- start the projector, it will shut down again. Please contact your dealer for assistance. Lamp events Off Orange Flashing The projector has shut down automatically. If you - BenQ MS500 | MS500 User Manual - Page 51
direction as well as the height of the projector if necessary. Open the lens cover. Remedy Replace the battery with new ones. Remove the obstacle. Stand within 8 meters (26 feet) of the projector. Remedy Please see "Entering the password recall procedure" on page 22 for details. Troubleshooting 51 - BenQ MS500 | MS500 User Manual - Page 52
Specifications Projector specifications All specifications are subject to change without notice. Optical Resolution (MX501/MX501-V) 1024 x 768 XGA (MS500/MS500-V) 800 x 600 SVGA Display system 1-CHIP DMD Lens F/Number F = 2.56-2.8 Lamp 220 W lamp Electrical Power supply AC100-240V, 3.2 A, 50-60 - BenQ MS500 | MS500 User Manual - Page 53
Dimensions 287.3 mm (W) x 100.4 mm (H) x 232.6 mm (D) 232.6 100.4 Ceiling mount installation 207.6 Ceiling Mount screw: M4 x 8 (Max L = 8 mm) 287.3 62 62 77 76.5 34.5 Unit: mm 199.6 78 445.95 397.90 364.40 83.38 141.88 287.3 123.0 232.6 Specifications 53 - BenQ MS500 | MS500 User Manual - Page 54
x 864 1152 x 864_75 75 67.5 1024 x 576 BenQ Notebook_timing 60.0 35.820 1024 x 600 BenQ Notebook_timing 64.995 41.467 1280 x 768 1280 x 60.241 1152 x 870@75Hz MAC21 75.060 68.680 *Supported timing for 3D signal with frame sequential format. Pixel Frequency (MHz) 25. Specifications - BenQ MS500 | MS500 User Manual - Page 55
Displaying a 1080i(1125i)@60Hz or 1080i(1125i)@50Hz signal may result in slight image vibration. Supported timing for Video and S-Video inputs Video mode NTSC PAL SECAM PAL-M PAL-N PAL-60 60 50 60 60 Color sub-carrier Frequency (MHz) 3.58 4.43 4.25 or 4.41 3.58 3.58 4.43 4.43 Specifications 55 - BenQ MS500 | MS500 User Manual - Page 56
product in accordance with BenQ's written instructions, especially the ambient humidity must be inbetween 10% and 90%, temperature in-between 0°C and 35°C, altitude lower than 4920 feet, and avoiding to operate the projector in a dusty environment. This warranty gives you specific legal rights, and
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
 |
 |
Welcome
MX501/MS500/MX501-V/MS500-V
Digital Projector
User Manual