BenQ MS504 DLP 3D Projector User Manual for MS504 and MX505
BenQ MS504 DLP 3D Projector Manual
 |
View all BenQ MS504 DLP 3D Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
BenQ MS504 DLP 3D Projector manual content summary:
- BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 1
MS504/MX505 Digital Projector User Manual - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 2
contents Using the teaching templates 33 Shutting down the projector 34 Direct power off 34 Menu operation 35 Maintenance 45 Care of the projector 45 Lamp information 46 Troubleshooting 50 Specifications 51 Projector specifications 51 Dimensions 52 Ceiling mount installation 52 Timing - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 3
the instructions mentioned in this manual and marked on the product. Safety Instructions 1. Please read this manual before 5. you operate your projector. your projector through a power stabilizer, surge protector or uninterruptible power supply (UPS). 3. Refer servicing to qualified service - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 4
should you ever undo or remove any other covers. Refer servicing only to suitably qualified professional service personnel. 9. Never replace the lamp assembly or any electronic components unless the projector is unplugged. 12. When the projector is under operation, you may sense some heated air - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 5
it is not fully horizontal may cause a malfunction of, or damage to, the lamp. 3000 m (10000 feet) 0 m (0 feet) 16. Do not stand the projector on end vertically. Doing so may cause the projector to fall over, causing injury or resulting in damage to the projector. Important safety instructions 5 - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 6
. 18. Do not place liquids near or on the projector. Liquids spilled into the projector may cause it to fail. If the projector does become wet, disconnect it from the power supply's power outlet and call BenQ to have the projector serviced. 19. This product is capable of displaying inverted images - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 7
function enables you to restart the projector immediately within 90 seconds after turning it off. • 3D Function supported Various 3D formats make the 3D function more flexible. By presenting the depth of the images, you can wear BenQ 3D glassed to enjoy the 3D movies, videos and sporting events in - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 8
from those illustrated. *The warranty card is only supplied in some specific regions. Please consult your dealer for detailed information. Projector Power cord VGA cable Quick start guide Optional accessories 1. Spare lamp kit 2. Ceiling mount kit Warranty card* Remote control with batteries - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 9
Projector exterior view Front/upper side 1 2 3 Rear/lower side 10 11 12 13 14 15 1. External control panel (See "Controls and functions" on page 10 for - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 10
the projector volume. When the On-Screen Display (OSD) menu is activated, the #5, #7, and #12 6. ECO BLANK keys are used as directional arrows to Used to hide the screen picture. select the desired menu items and to 7. Keystone/Arrow keys ( / Up, / Down) make adjustments. 13. SOURCE Manually - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 11
timer setting directly. 14 14. 3D settings Enters 3D settings directly. 1. POWER 15. AUTO Toggles the projector between standby mode and on. / Up, / Down) Quickly selects several functions to adjust Manually corrects distorted images resulting from an angled projection. the projected image - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 12
control and the IR sensor(s) on the projector that might obstruct the infra-red beam. • Operating the projector from the front Approx. +30º manufacturer. • Dispose of the used batteries according to the manufacturer's instructions and local environment regulations for your region. • Never throw the - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 13
Set Rear Ceiling in the SYSTEM SETUP: Basic > Projector Installation menu after you turn the projector on. 2. Front Ceiling Select this location with the projector suspended upside-down from the ceiling in front of the screen. Purchase the BenQ Projector Ceiling Mount Kit from your dealer to mount - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 14
. All measurements are approximate and may vary from the actual sizes. BenQ recommends that if you intend to permanently install the projector, you should physically test the projection size and distance using the actual projector in situ before you permanently install it, so as to make allowance - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 15
cable 7. Audio cable 4. Component Video to VGA (D-Sub) adapter cable • Many notebooks do not turn on their external video ports when connected to a projector. Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate a function key labeled CRT/ LCD or a function - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 16
might be expected in home theater or home cinema applications. Any stereo audio input (if provided), is mixed into a common mono audio output through the projector speaker(s). The built-in speaker(s) will be muted (except for the Power On/Off Ring Tone) when the AUDIO OUT jack is connected. • The - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 17
, it will run the cooling fan for approximately 90 seconds before energizing the lamp. 3. If the projector is activated for the first time, select your OSD language following the on-screen instructions. 4. If you are prompted for a password, press the arrow keys to enter a six-digit password. See - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 18
air comes from. Auto-adjusting the image In some cases, you may need to optimize the picture quality. To do this, press AUTO on the projector or remote control. Within 3 seconds, the built-in Intelligent Auto Adjustment function will re-adjust the values of Frequency and Clock to provide the best - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 19
refers to the situation where the projected image is noticeably wider at either the top or bottom. It occurs when the projector is not perpendicular to the screen. To correct this, you will need to manually correct it following ONE of these steps. • Using the remote control Press / on the - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 20
Position Phase 0 H. Size 0 Digital Zoom 3D Teaching Template Off Auto SYSTEM SETUP: Basic Presentation Timer Language Projector Installation Menu Settings Operation Settings Panel Key Lock Background Color Splash Screen ENTER Front Table Off BenQ BenQ Analog RGB MENU Exit 2. Use / to - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 21
forget the password. Print out this manual (if necessary) and write the password you used in this manual, and keep the manual in a safe place for later recall. Setting a password Once a password has been set and the power on lock is activated, the projector cannot be used unless the correct - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 22
write down the recall code, and contact BenQ Customer Center. projector. 3. Seek help from the local BenQ service center to decode the number. You may as asterisks on-screen. Write your selected password down here in this manual in advance or right after the password is entered so that it is - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 23
Press to highlight Power On Lock and press / to select Off. You will not have to enter the password next time when turning on the projector. ii. If the password is incorrect, the password error message appears lasting for three seconds, and the message "INPUT PASSWORD" appears for your retry. You - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 24
the center of the picture. Press the key repeatedly until the picture size is suitable for your need. 2. Use the directional arrows ( , , , ) on the projector or remote control to navigate the picture. 3. To restore the picture to its original size, press AUTO. You can also press Digital Zoom-. When - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 25
the white portions are active areas. • OSD menus can be displayed on those unused black areas. 1. Auto: Scales an image proportionally to fit the projector's native resolution in its horizontal or vertical width. This is suitable for the incoming image which is neither in 4:3 nor 16:9 and you want - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 26
you can follow one of the following steps. • Press MODE/ENTER on the projector or remote control repeatedly until your desired mode is selected. • Go to the PICTURE in a blackened (little light) environment. 5. 3D mode: Is appropriate for playing 3D images and 3D video clips. 6. User 1/User 2 mode: - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 27
vibrant colors in picture. It enables a greater than 50% brightness increase in mid-tone images, which are common in video and natural scenes, so the projector reproduces images in realistic and true colors. If you prefer images with that quality, select On. If you don't need it, select Off. When - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 28
Management menu to make adjustments. To adjust the settings: 1. Go to the PICTURE menu and highlight 3D Color Management. 2. Press MODE/ENTER on the projector or remote control and the 3D Color Management page appears. 3. Highlight Primary Color and press / to select a color from among Red, Yellow - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 29
Please refer to the illustration to the right for how the colors relate to each other. For example, if you select Red and set its range at 0, only pure red in the projected picture will be selected. Increasing its range will include red close to yellow and red close to magenta. 5. Press to - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 30
2. Highlight Yes and press MODE/ENTER to confirm. You will see the message "Timer is Off" displaying on the screen. Remote paging operations Connect the projector to your PC or notebook with a USB cable prior to using the paging function. See "Connection" on page 15 for details. You can operate your - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 31
is between 0°C-35°C. Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and ambient temperature is between 0°C and 35°C. The projector will be over cooled, if you turn the mode on under such a condition. To activate the High Altitude Mode: 1. Press MENU/EXIT and then press - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 32
On. If available, you can also press Mute on the remote control to toggle projector audio between on and off. Adjusting the sound level To adjust the sound level affect the Power On/Off Ring Tone. Using the test pattern The projector is able to display the grid test pattern. It helps you adjust - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 33
Using the teaching templates The projector provides several preset patterns for various teaching purposes. To activate the pattern: 1. Open the OSD menu and go to the DISPLAY > Teaching Template and press / - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 34
flashes orange, the projection lamp shuts down, and the fans will continue to run for approximately 90 seconds to cool down the projector. To protect the lamp, the projector will not respond to any commands during the cooling process. To shorten the cooling time, you can also activate the Quick - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 35
OSD) menus vary according to the signal type selected and the projector model you are using. Main menu Sub-menu Options 1. DISPLAY 3D Sync Invert Disable/Invert 3D Apply 3D 3D Settings 1/3D Settings 2/3D Settings Settings 3/Off Save 3D Settings 3D Settings Settings 3 1/3D Settings 2/3D - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 36
Left/Bottom-Left/TopRight/Bottom-Right Count Down/Count Up On/Off Language 4. SYSTEM SETUP: Basic Projector Installation Front Table/Rear Table/Rear Ceiling/Front Ceiling Menu Display 5 sec/10 sec/20 sec Panel Key Lock On/Off Background Color Black/Blue/Purple/BenQ Splash Screen Black/Blue - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 37
in Reset All Settings • Source • Picture Mode • Lamp Mode Current System Status • Resolution • 3D Format • Color System • Equivalent Lamp • Firmware Version Note that the menu items are available when the projector detects at least one valid signal. If there is no equipment connected to - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 38
1. DISPLAY menu Description of each menu Function Wall Color Aspect Ratio Keystone Position Phase Description Corrects the projected picture's color when the projection surface is not white. See "Using Wall Color" on page 26 for details. There are several options to set the image's aspect ratio - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 39
to correct the problem. Apply 3D Settings After the 3D settings are saved, you can decide if you would like to apply them by choosing a set of 3D settings that you have saved. Once applied, the projector will automatically play the incoming 3D contents if it matches the 3D settings saved. Only - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 40
Color Pre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. See "Selecting a "Setting a preferred color temperature" on page 28 for details. 3D Color Management See "3D Color Management" on page 28 for details. Reset Picture Setting See - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 41
Display (OSD) menus. See "Using the menus" on page 20 for details. The projector can be installed on a ceiling or behind a screen, or with one or more mirrors the Quick Cooling function. Selecting On enables the function and projector cooling time will be shortened from a normal 90-second duration - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 42
a baud rate that is identical with your computer's so that you can connect the projector using a suitable RS-232 cable and update or download the projector's firmware. This function is intended for qualified service personnel. See "Using the test pattern" on page 32 for details. 5. SYSTEM SETUP - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 43
mode and the COMPUTER 1 jack is correctly connected to devices. See "Connection" on page 15 for how to make the connection. Audio Pass Through The projector can play sound when it is in standby mode and the corresponding jacks are correctly connected to devices. Press / to choose the source that you - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 44
mode in the PICTURE menu. Lamp Mode Shows the current lamp mode. Resolution Shows the native resolution of the input signal. 3D Format Shows the current 3D mode. Color System Shows input system format. Equivalent Lamp Displays the number of hours the lamp has been used. Firmware Version Shows - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 45
wax, alcohol, benzene, thinner or other chemical detergents. These can damage the case. Storing the projector If you need to store the projector for an extended time, please follow the instructions below: • Make sure the temperature and humidity of the storage area are within the recommended range - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 46
. To keep the lamp life as long as possible, you can do the following settings via the OSD menu. • Setting the Lamp Mode Setting the projector in Economic, SmartEco or LampSave mode extends the lamp operation life. To set Economic, SmartEco or LampSave mode, go into the SYSTEM SETUP: Advanced > Lamp - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 47
>XXXX Hours Lamp usage time exceeded Order a new lamp at lamp.benq.com OK The lamp MUST be replaced before the projector will operate normally. Press MODE/ENTER to dismiss the message. WARNING Out of Lamp Usage Time Replace lamp (Refer to user manual) Then reset lamp timer Order a new lamp at lamp - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 48
Replacing the lamp Turn the power off and disconnect the projector from the power outlet. Please contact service personnel for changing the lamp or visit http://www.BenQ.com. Resetting the lamp timer After the startup logo, open the On-Screen Display (OSD) menu. Go to the SYSTEM SETUP: Advanced > - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 49
Indicators Light Status & Description Orange Off Green Flashing Off Green Off Orange Flashing Off Red Off Green Off Red Flashing Off Off Off Off Off Green Off Red Red Green Red Red Flashing Red Power events Off Stand-by mode Off Powering up Off Normal operation Off Normal - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 50
Troubleshooting The projector does not turn on. Cause Remedy There is no power from the power cord. Attempting to turn the projector on again during the cooling process. Plug the power cord into the AC power jack on the projector, and plug the power cord into the power outlet. If the power - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 51
Specifications Projector specifications All specifications are subject to change without notice. Optical Resolution (MS504) 800 x 600 SVGA (MX505) 1024 x 768 XGA Display system 1-CHIP DMD Lens F/Number F = 2.56 ~ 2.8, f = 21 ~ 23.1 mm Lamp 190 W lamp Electrical Power supply AC100-240V, 2.7 A, - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 52
Dimensions 283 mm (W) x 95 mm (H) x 222 mm (D) 222 95 Ceiling mount installation Ceiling Mount screw: M4 (Max L = 25 mm; Min L = 20 mm) 59.5 283 59.5 54.46 Unit: mm 207.54 105.77 54.46 71.75 4.93 71.65 201.55 44.94 625.86 577.7 537.9 52 Specifications 81.9 128.9 104.42 225.4 Unit: mm - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 53
x 864 1152 x 864_75 1024 x 576 BenQ Notebook_timing 1024 x 600 BenQ Notebook_timing 1280 x 720 1280 x 720_60* 1280 Supported timing for 3D signal in Frame Sequential, Top Bottom and Side by Side formats. **Supported timing for 3D signal in Frame Sequential format. ***Supported timing for 3D - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 54
33.75 74.25 24 27 74.25 25 28.13 74.25 30 33.75 74.25 50 56.25 148.5 60 67.5 148.5 • *Supported timing for 3D signal in Frame Sequential format. • Displaying a 1080i(1125i)@60Hz or 1080i(1125i)@50Hz signal may result in slight image vibration - BenQ MS504 DLP 3D Projector | User Manual for MS504 and MX505 - Page 55
BenQ's written instructions, especially the ambient humidity must be inbetween 10% and 90%, temperature in-between 0°C and 35°C, altitude lower than 4920 feet, and avoiding to operate the projector manual or otherwise, without the prior written permission of BenQ Corporation. Disclaimer BenQ
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
 |
 |
MS504/MX505
Digital Projector
User Manual