BenQ MX600 MX600 User Manual

BenQ MX600 Manual

Get BenQ MX600 PDF manuals and user guides View all BenQ MX600 manuals
Add to My Manuals
Save this manual to your list of manuals

BenQ MX600 manual content summary:

  • BenQ MX600 | MX600 User Manual - Page 1
    MX600 Digital Projector User Manual
  • BenQ MX600 | MX600 User Manual - Page 2
    34 Using the teaching templates 35 Shutting down the projector 36 Direct power off 36 Menu operation 37 Maintenance 48 Care of the projector 48 Lamp information 49 Troubleshooting 55 Specifications 56 Projector specifications 56 Dimensions 57 Ceiling mount installation 57 Timing chart
  • BenQ MX600 | MX600 User Manual - Page 3
    the instructions mentioned in this manual and marked on the product. Safety Instructions 1. Please read this manual before 5. you operate your projector. your projector through a power stabilizer, surge protector or uninterruptible power supply (UPS). 3. Refer servicing to qualified service
  • BenQ MX600 | MX600 User Manual - Page 4
    should you ever undo or remove any other covers. Refer servicing only to suitably qualified professional service personnel. 9. Never replace the lamp assembly or any electronic components unless the projector is unplugged. 12. When the projector is under operation, you may sense some heated air
  • BenQ MX600 | MX600 User Manual - Page 5
    it is not fully horizontal may cause a malfunction of, or damage to, the lamp. 3000 m (10000 feet) 0 m (0 feet) 16. Do not stand the projector on end vertically. Doing so may cause the projector to fall over, causing injury or resulting in damage to the projector. Important safety instructions 5
  • BenQ MX600 | MX600 User Manual - Page 6
    . 18. Do not place liquids near or on the projector. Liquids spilled into the projector may cause it to fail. If the projector does become wet, disconnect it from the power supply's power outlet and call BenQ to have the projector serviced. 19. This product is capable of displaying inverted images
  • BenQ MX600 | MX600 User Manual - Page 7
    projector immediately within 90 seconds after turning it off. • 3D Function supported Various 3D formats make the 3D function more flexible. By presenting the depth of the images, you can wear BenQ 3D glasses to enjoy the 3D specifications. This is normal and expected behavior. Introduction
  • BenQ MX600 | MX600 User Manual - Page 8
    illustrated. *The warranty card is only supplied in some specific regions. Please consult your dealer for detailed information. Projector QDuigiictkalSPtraortjeGctuoidr e Quick start guide Power cord VGA cable User manual CD Warranty card* Remote control with batteries Optional accessories
  • BenQ MX600 | MX600 User Manual - Page 9
    Projector exterior view Front/upper side 1 2 3 4 5 Rear/lower side 11 12 13 14 15 21 22 1. External control panel (See "Controls and functions" on page 10
  • BenQ MX600 | MX600 User Manual - Page 10
    a 11. Keystone/Arrow keys ( / Up, / problem. Down) 4. MENU/EXIT Manually corrects distorted images Turns on the On-Screen Display (OSD mode. Activates the selected On-Screen Display (OSD) menu item. Increases the projector volume. When the On-Screen Display (OSD) menu is activated, the #5,
  • BenQ MX600 | MX600 User Manual - Page 11
    / Fast-forward) Down) Goes to the previous file/Plays/Pauses/ Manually corrects distorted images resulting from an angled projection. Goes to the next or reduces the projected picture size. 5. Left/ Decreases the projector volume. 6. MODE/ENTER Selects an available picture setup mode.
  • BenQ MX600 | MX600 User Manual - Page 12
    best picture colored light when you press it. timings for the displayed image. The laser beam is visible. It is 16. Right/ Increases the projector volume. necessary to press and hold LASER for continuous output. When the On-Screen Display (OSD) menu is activated, the #3, #5, and #16 keys are
  • BenQ MX600 | MX600 User Manual - Page 13
    sensor(s) on the projector that might obstruct the infra-red beam. • Operating the projector from the front • Operating the projector from the rear . • Dispose of the used batteries according to the manufacturer's instructions and local environment regulations for your region. • Never throw the
  • BenQ MX600 | MX600 User Manual - Page 14
    Set Rear Ceiling in the SYSTEM SETUP: Basic > Projector Installation menu after you turn the projector on. 2. Front Ceiling Select this location with the projector suspended upside-down from the ceiling in front of the screen. Purchase the BenQ Projector Ceiling Mount Kit from your dealer to mount
  • BenQ MX600 | MX600 User Manual - Page 15
    . All measurements are approximate and may vary from the actual sizes. BenQ recommends that if you intend to permanently install the projector, you should physically test the projection size and distance using the actual projector in situ before you permanently install it, so as to make allowance
  • BenQ MX600 | MX600 User Manual - Page 16
    each source. 3. Ensure the cables are firmly inserted. • In the connections shown below, some cables may not be included with the projector (see "Shipping contents" on page 8). They are commercially available from electronics stores. • The connection illustrations below are for reference only. The
  • BenQ MX600 | MX600 User Manual - Page 17
    COMPUTER 1 jack. • If you wish to use this connection method when the projector is in standby mode, make sure the Monitor Out function is turned on in for details. • If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, check
  • BenQ MX600 | MX600 User Manual - Page 18
    detailed information. Using a HDMI to Micro USB cable 1. Take a HDMI to Micro USB cable and connect one end to the HDMI input connector on the projector. 2. Connect the other end to the Micro USB output socket on your smart device. 3. Switch to the HDMI/MHL input source. To switch input signal
  • BenQ MX600 | MX600 User Manual - Page 19
    , it will run the cooling fan for approximately 90 seconds before energizing the lamp. 3. If the projector is activated for the first time, select your OSD language following the on-screen instructions. 4. If you are prompted for a password, press the arrow keys to enter a six-digit password. See
  • BenQ MX600 | MX600 User Manual - Page 20
    it is close to the exhaust vent where hot air comes from. Auto-adjusting the image In some cases, you may need to optimize the picture quality. To do this, press AUTO on the projector or remote control. Within 3 seconds, the built-in Intelligent Auto Adjustment function will re-adjust the values
  • BenQ MX600 | MX600 User Manual - Page 21
    refers to the situation where the projected image is noticeably wider at either the top or bottom. It occurs when the projector is not perpendicular to the screen. To correct this, you will need to manually correct it following ONE of these steps. • Using the remote control Press / on the
  • BenQ MX600 | MX600 User Manual - Page 22
    Sub-menu DISPLAY Wall Color Aspect Ratio Keystone Position Phase H. Size Digital Zoom 3D Teaching Template Highlight Current input signal Analog RGB Off Auto ENTER 0 0 Status Table Front+Rear Off BenQ BenQ SYSTEM SETUP: Basic Presentation Timer Language Projector Installation Menu Settings
  • BenQ MX600 | MX600 User Manual - Page 23
    forget the password. Print out this manual (if necessary) and write the password you used in this manual, and keep the manual in a safe place for later recall. Setting a password Once a password has been set and the power on lock is activated, the projector cannot be used unless the correct
  • BenQ MX600 | MX600 User Manual - Page 24
    write down the recall code, and contact BenQ Customer Center. projector. 3. Seek help from the local BenQ service center to decode the number. You may as asterisks on-screen. Write your selected password down here in this manual in advance or right after the password is entered so that it is
  • BenQ MX600 | MX600 User Manual - Page 25
    Press to highlight Power On Lock and press / to select Off. You will not have to enter the password next time when turning on the projector. ii. If the password is incorrect, the password error message displays lasting for three seconds, and the message "INPUT PASSWORD" displays for your retry. You
  • BenQ MX600 | MX600 User Manual - Page 26
    picture to a desired size. 4. To navigate the picture, press MODE/ENTER to switch to the panning mode and press the directional arrows ( , , , ) on the projector or remote control to navigate the picture. 5. To reduce size of the picture, press MODE/ENTER to switch back to the zoom in/ out function
  • BenQ MX600 | MX600 User Manual - Page 27
    can be displayed on those unused black areas. 1. Auto: Scales an image proportionally to fit 4. 16:9: Scales an image so that it is the projector's native resolution in its displayed in the center of the horizontal or vertical width. This is suitable screen with a 16:9 aspect ratio. for the
  • BenQ MX600 | MX600 User Manual - Page 28
    you can follow one of the following steps. • Press MODE/ENTER on the projector or remote control repeatedly until your desired mode is selected. • Go to the PICTURE in a blackened (little light) environment. 5. 3D mode: Is appropriate for playing 3D images and 3D video clips. 6. User 1/User 2 mode:
  • BenQ MX600 | MX600 User Manual - Page 29
    vibrant colors in picture. It enables a greater than 50% brightness increase in mid-tone images, which are common in video and natural scenes, so the projector reproduces images in realistic and true colors. If you prefer images with that quality, select On. If you don't need it, select Off. When
  • BenQ MX600 | MX600 User Manual - Page 30
    Management menu to make adjustments. To adjust the settings: 1. Go to the PICTURE menu and highlight 3D Color Management. 2. Press MODE/ENTER on the projector or remote control and the 3D Color Management page displays. 3. Highlight Primary Color and press / to select a color from among Red, Yellow
  • BenQ MX600 | MX600 User Manual - Page 31
    Please refer to the illustration to the right for how the colors relate to each other. For example, if you select Red and set its range at 0, only pure red in the projected picture will be selected. Increasing its range will include red close to yellow and red close to magenta. 5. Press to
  • BenQ MX600 | MX600 User Manual - Page 32
    message "Timer is Off" displaying on the screen. Remote paging operations Connect the projector to your PC or notebook with a USB cable prior to using the paging , check if the USB connection is correctly made and the mouse driver on your computer is updated to the latest version. The remote paging
  • BenQ MX600 | MX600 User Manual - Page 33
    projector menu to let the projector return the image on the projector or remote projector locked, you can prevent your projector / on the projector or remote control. projector without disabling panel key lock, the projector will between 0°C and 35°C. The projector will be over cooled, if projector
  • BenQ MX600 | MX600 User Manual - Page 34
    On. If available, you can also press MUTE on the remote control to toggle projector audio between on and off. Adjusting the sound level To adjust the sound level, affect the Power On/Off Ring Tone. Using the test pattern The projector is able to display the grid test pattern. It helps you adjust
  • BenQ MX600 | MX600 User Manual - Page 35
    Using the teaching templates The projector provides several preset patterns for various teaching purposes. To activate the pattern: 1. Open the OSD menu and go to the DISPLAY > Teaching Template and press /
  • BenQ MX600 | MX600 User Manual - Page 36
    . To protect the lamp, wait about 10 minutes before re-starting the projector. When you attempt to restart the projector, the fans may run for a few minutes to cool down. In such cases, press POWER or ON again to start the projector after the fans stop and the POWER indicator light turns orange. 36
  • BenQ MX600 | MX600 User Manual - Page 37
    (OSD) menus vary according to the signal type selected and the projector model you are using. Main menu Sub-menu Options 1. DISPLAY 2. 3D Sync Invert Disable/Invert 3D Apply 3D 3D Settings 1/3D Settings 2/3D Settings Settings 3/Off Save 3D Settings 3D 3 Settings 1/3D Settings 2/3D
  • BenQ MX600 | MX600 User Manual - Page 38
    -Left/Top-Right/ Bottom-Right Count Down/Count Up On/Off Language 4. SYSTEM SETUP: Basic Projector Installation Front Table/Rear Table/Rear Ceiling/Front Ceiling Menu Display Time 5 sec/10 sec/20 Rear Panel Key Lock On/Off Background Color Black/Blue/Purple/BenQ Splash Screen Black/Blue
  • BenQ MX600 | MX600 User Manual - Page 39
    Reset All Settings • Source • Picture Mode • Lamp Mode Current System Status • Resolution • 3D Format • Color System • Equivalent Lamp Hour • Firmware Version Note that the menu items are available when the projector detects at least one valid signal. If there is no equipment connected to
  • BenQ MX600 | MX600 User Manual - Page 40
    1. DISPLAY menu Description of each menu Function Wall Color Aspect Ratio Keystone Position Phase Description Corrects the projected picture's color when the projection surface is not white. See "Using Wall Color" on page 28 for details. There are several options to set the image's aspect ratio
  • BenQ MX600 | MX600 User Manual - Page 41
    to correct the problem. Apply 3D Settings After the 3D settings are saved, you can decide if you would like to apply them by choosing a set of 3D settings that you have saved. Once applied, the projector will automatically play the incoming 3D contents if it matches the 3D settings saved. Only
  • BenQ MX600 | MX600 User Manual - Page 42
    Color Pre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. See "Selecting a "Setting a preferred color temperature" on page 30 for details. 3D Color Management See "3D Color Management" on page 30 for details. Reset Picture Setting See
  • BenQ MX600 | MX600 User Manual - Page 43
    Space" on page 25 for details. Presentation Timer Language Projector Installation Menu Settings Reminds the presenter to finish the Display (OSD) menus. See "Using the menus" on page 22 for details. The projector can be installed on a ceiling or behind a screen, or with one or more mirrors
  • BenQ MX600 | MX600 User Manual - Page 44
    Quick Cooling Enables or disables the Quick Cooling function. Selecting On enables the function and projector cooling time will be shortened from a normal 90-second duration to approximately 15 seconds to enable all the remote receivers or one specific remote receiver on the projector. 44 Operation
  • BenQ MX600 | MX600 User Manual - Page 45
    SETUP: Basic menu 5. SYSTEM SETUP: Advanced menu Function Description Panel Key Lock Background Color Disables or enables all panel key functions except POWER on the projector and keys on the remote control. See "Locking control keys" on page 33 for details. Sets the background color for the
  • BenQ MX600 | MX600 User Manual - Page 46
    baud rate that is identical with your computer's so that you can connect the projector using a suitable RS-232 cable and update or download the projector's firmware. This function is intended for qualified service personnel. See "Using the test pattern" on page 34 for details. Closed Caption Enable
  • BenQ MX600 | MX600 User Manual - Page 47
    mode in the PICTURE menu. Lamp Mode Shows the current lamp mode. Resolution Shows the native resolution of the input signal. 3D Format Shows the current 3D mode. Color System Shows input system format. Equivalent Lamp Hour Displays the number of hours the lamp has been used. Firmware Version
  • BenQ MX600 | MX600 User Manual - Page 48
    These can damage the case. Storing the projector If you need to store the projector for an extended time, please follow the instructions below: • Make sure the temperature and humidity of the storage area are within the recommended range for the projector. Please refer to "Specifications" on page 56
  • BenQ MX600 | MX600 User Manual - Page 49
    . To keep the lamp life as long as possible, you can do the following settings via the OSD menu. • Setting the Lamp Mode Setting the projector in Economic, SmartEco, LampSave or LumenCare mode extends the lamp operation life. To set Economic, SmartEco, LampSave or LumenCare mode, go into the SYSTEM
  • BenQ MX600 | MX600 User Manual - Page 50
    >XXXX Hours Lamp usage time exceeded Order a new lamp at lamp.benq.com OK The lamp MUST be replaced before the projector will operate normally. Press MODE/ENTER to dismiss the message. WARNING Out of Lamp Usage Time Replace lamp (Refer to user manual) Then reset lamp timer Order a new lamp at lamp
  • BenQ MX600 | MX600 User Manual - Page 51
    that you use respirators, safety glasses, goggles or face shield and wear protective clothing such as gloves. 1. Turn the power off and disconnect the projector from the power outlet. If the lamp is hot, avoid burns by waiting for approximately 45 minutes until the lamp has cooled. 2. Loosen the
  • BenQ MX600 | MX600 User Manual - Page 52
    the lamp in locations where water might splash on it, children can reach it, or near flammable materials. • Do not insert your hands into the projector after the lamp is removed. If you touch the optical components inside, it could cause color unevenness and distortion of the projected images. 8. As
  • BenQ MX600 | MX600 User Manual - Page 53
    Resetting the lamp timer 15. After the startup logo, open the On-Screen Display (OSD) menu. Go to the SYSTEM SETUP: Advanced > Lamp Settings menu. Press MODE/ENTER. The Lamp Settings page displays. Highlight Reset Lamp Timer. A warning message displays asking if you want to reset the lamp timer.
  • BenQ MX600 | MX600 User Manual - Page 54
    Normal operation Off Normal power-down cooling Off Download Red CW start fail Off Scaler shutdown fail (data abort) Red Scaler reset fail (video projector only) Lamp events Red Orange Flashing Lamp1 error in normal operation Lamp is not lit up Thermal events Off Fan 1 error (the actual
  • BenQ MX600 | MX600 User Manual - Page 55
    Troubleshooting The projector does not turn on. Cause Remedy There is no power from the power cord. Attempting to turn the projector on again during the cooling process. Plug the power cord into the AC power jack on the projector, and plug the power cord into the power outlet. If the power
  • BenQ MX600 | MX600 User Manual - Page 56
    Specifications Projector specifications All specifications are subject to change without notice. Optical Resolution 1024 x 768 XGA Display system 1-CHIP DMD Lens F/Number F = 2.57 ~ 2.65, f = 21 ~ 23.1 mm Lamp 210 W lamp Electrical Power supply AC100-240V, 3.1 A, 50-60 Hz (Automatic) Power
  • BenQ MX600 | MX600 User Manual - Page 57
    Dimensions 287.3 mm (W) x 114.4 mm (H) x 232.6 mm (D) 232.6 114.4 Ceiling mount installation Ceiling Mount screw: M4 (Max L = 25 mm; Min L = 20 mm) 287.3 62 62 Unit: mm 127.7 76.5 77 34.5 8 45.53 199.6 625.7 577.7 537.9 25 83.39 136.39 285.78 105 231.78 Unit: mm Specifications 57
  • BenQ MX600 | MX600 User Manual - Page 58
    576 BenQ Notebook_timing 1024 x 600 BenQ Notebook_timing Supported timing for 3D signal in Frame Sequential, Top Bottom and Side by Side format. **Supported timing for 3D signal in Frame Sequential format. ***Supported timing for 3D signal in Top Bottom and Side by Side format. 58 Specifications
  • BenQ MX600 | MX600 User Manual - Page 59
    @60Hz BenQ Notebook Timing 1024 x 600@65Hz BenQ Notebook Supported timing for 3D signal in Frame Sequential, Top Bottom and Side by Side formats. **Supported timing for 3D signal in Frame Sequential format. ***Supported timing for 3D signal in Top Bottom and Side by Side formats. Specifications
  • BenQ MX600 | MX600 User Manual - Page 60
    HDMI/DVI HDMI/DVI HDMI/DVI *Supported timing for 3D signal in Frame Sequential format. **Supported timing for 3D signal in Top Bottom, Frame Packing and Side by Side formats. ***Supported timing for 3D signal in Frame Sequential, Top MHL MHL MHL MHL MHL MHL MHL MHL MHL MHL MHL 60 Specifications
  • BenQ MX600 | MX600 User Manual - Page 61
    33.75 74.25 50 56.25 148.5 60 67.5 148.5 • *Supported timing for 3D signal in Frame Sequential format. • Displaying a 1080i(1125i)@60Hz or 1080i(1125i)@50Hz signal may 4.43 4.25 or 4.41 3.58 3.58 4.43 4.43 *Supported timing for 3D signal in Frame Sequential format. Specifications 61
  • BenQ MX600 | MX600 User Manual - Page 62
    product in accordance with BenQ's written instructions, especially the ambient humidity must be inbetween 10% and 90%, temperature in-between 0°C and 35°C, altitude lower than 4920 feet, and avoiding to operate the projector in a dusty environment. This warranty gives you specific legal rights, and
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
MX600
Digital Projector
User Manual