BenQ MX716 DLP Projector User Manual

BenQ MX716 DLP Projector Manual

Get BenQ MX716 DLP Projector PDF manuals and user guides View all BenQ MX716 DLP Projector manuals
Add to My Manuals
Save this manual to your list of manuals

BenQ MX716 DLP Projector manual content summary:

  • BenQ MX716 DLP Projector | User Manual - Page 1
    MX716/MX717 Digital Projector User Manual Welcome
  • BenQ MX716 DLP Projector | User Manual - Page 2
    through a LAN environment 36 Shutting down the projector 39 Direct power off 39 Menu operation 40 Maintenance 50 Care of the projector 50 Lamp information 51 Troubleshooting......... 58 Specifications 59 Projector specifications 59 Dimensions 60 Ceiling mount installation 61 Timing
  • BenQ MX716 DLP Projector | User Manual - Page 3
    the instructions mentioned in this manual and marked on the product. Safety Instructions 1. Please read this manual before you 5. operate your projector. your projector through a power stabilizer, surge protector or uninterruptible power supply (UPS). 3. Refer servicing to qualified service
  • BenQ MX716 DLP Projector | User Manual - Page 4
    should you ever undo or remove any other covers. Refer servicing only to suitably qualified professional service personnel. 9. Never replace the lamp assembly or any electronic components unless the projector is unplugged. 12. When the projector is under operation, you may sense some heated air and
  • BenQ MX716 DLP Projector | User Manual - Page 5
    it is not fully horizontal may cause a malfunction of, or damage to, the lamp. 3000 m (10000 feet) 0 m (0 feet) 16. Do not stand the projector on end vertically. Doing so may cause the projector to fall over, causing injury or resulting in damage to the projector. Important safety instructions 5
  • BenQ MX716 DLP Projector | User Manual - Page 6
    . 18. Do not place liquids near or on the projector. Liquids spilled into the projector may cause it to fail. If the projector does become wet, disconnect it from the power supply's power outlet and call BenQ to have the projector serviced. 19. This product is capable of displaying inverted images
  • BenQ MX716 DLP Projector | User Manual - Page 7
    Eco Blank function will save up to 70% of your lamp power at the same time your image is hiding • Network Settings allowing management of projector status from a computer using a web browser • 3D function to enjoy the 3D movies, videos, and sporting events in a more realistic way by presenting the
  • BenQ MX716 DLP Projector | User Manual - Page 8
    card is only supplied in some specific regions. Please consult your dealer for detailed information. MX716 MX717 Projector Power cord VGA cable Quick start guide User manual CD Warranty card* Remote control with batteries Soft carry case Optional accessories 1. Spare lamp kit 2. Wall
  • BenQ MX716 DLP Projector | User Manual - Page 9
    Projector exterior view Front/upper side 1 2 3 MX716 4 1 2 3 MX717 5 Rear/lower side 12 10 11 13 14 MX716 19 22 15 16 17 18 1. 2. 6 3. 4. 5. 7 6. 8 7. 8. 9. 9 10. 11. 6 12. 13. 14. Ceiling mount holes 24 10 11 12 13 14 15 16 17 18 AUDIO-IN MX717 19 20 22 24 23 21 22 23 Introduction 9
  • BenQ MX716 DLP Projector | User Manual - Page 10
    Controls and functions Projector MX716 MX717 1 1 2 9 2 9 3 10 3 10 4 11 4 11 5 6 12 13 5 14 6 12 13 image. problem. 3. POWER indicator light 11. Keystone/Arrow keys ( / Up, / Lights up or flashes when the projector is Down) under operation. Manually corrects distorted
  • BenQ MX716 DLP Projector | User Manual - Page 11
    Remote control MX716 MX717 1 2 13 14 3 15 4 16 5 17 6 16 7 18 8 19 9 20 10 21 11 22 12 23 24 1. ON/OFF Toggles the projector between standby mode and on. 2. Source selection buttons (COMPUTER-1, COMPUTER-2, VIDEO, S-VIDEO) Selects an input source for display. 3. MENU/
  • BenQ MX716 DLP Projector | User Manual - Page 12
    the LASER pointer Down) The Laser Pointer is a Manually corrects distorted images resulting from an angled projection. presentation aid and 20. MUTE keep this remote control out of the reach of Toggles projector audio between on and off. children. 21. ASPECT Selects the display aspect
  • BenQ MX716 DLP Projector | User Manual - Page 13
    are no obstacles between the remote control and the IR sensors on the projector that might obstruct the infra-red beam. • Operating the projector from the front MX716 Approx. +15º • Operating the projector from the top MX716 Approx. +15º MX717 Approx. +15º MX717 Approx. +15º Introduction 13
  • BenQ MX716 DLP Projector | User Manual - Page 14
    • Replace only with the same or equivalent type recommended by the battery manufacturer. • Dispose of the used batteries according to the manufacturer's instructions and local environment regulations for your region. • Never throw the batteries into a fire. There may be danger of an explosion. • If
  • BenQ MX716 DLP Projector | User Manual - Page 15
    the screen. Note that a special rear projection screen is required. Set Rear Table in the SYSTEM SETUP: Basic > Projector Position menu after you turn the projector on. Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and
  • BenQ MX716 DLP Projector | User Manual - Page 16
    a 120'' (about 3.0 m) screen is required. Projection dimensions Refer to "Dimensions" on page 60 for the center of lens dimensions of this projector before calculating the appropriate position. A1 Maximum zoom Minimum zoom Screen Center of lens Vertical offset Projection distance Table A1: The
  • BenQ MX716 DLP Projector | User Manual - Page 17
    are for reference only. The rear connecting jacks available on the projector vary with each projector model. Notebook or desktop computer A/V device Monitor (VGA) (DVI) 1 2 3 19 4 5 9786 Speakers 9 MX716 or or MX717 AUDIO-IN 1. VGA cable 6. Audio L/R cable 2. VGA to DVI-A cable
  • BenQ MX716 DLP Projector | User Manual - Page 18
    COMPUTER 1 jack. • If you wish to use this connection method when the projector is in standby mode, make sure the Monitor Out function is turned on in to YUV. See "Changing Color Space" on page 26 for details. • The projector is only capable of playing mixed mono audio, even if a stereo audio input
  • BenQ MX716 DLP Projector | User Manual - Page 19
    MX716 2. Press POWER or ON to start the projector. As soon as the lamp lights up, a "Power MX717 On Tone" will be heard. The POWER indicator the lamp. 3. If the projector is activated for the first time, select your OSD language following the onscreen instructions. 4. If you are prompted for
  • BenQ MX716 DLP Projector | User Manual - Page 20
    foot to fine-tune the horizontal angle. MX717 To retract the foot, hold up the projector while pressing the quick-release button, then slowly lower the projector. Screw the rear adjuster foot in a reverse direction. To adjust the projector (MX717): Screw the adjuster feet to fine-tune
  • BenQ MX716 DLP Projector | User Manual - Page 21
    that you need using the zoom ring. focus ring. MX716 MX717 MX716 MX717 Correcting keystone Keystoning refers to the situation where the projected you will need to manually correct it following ONE of these steps. • Using the remote control Press / on the projector or remote control to
  • BenQ MX716 DLP Projector | User Manual - Page 22
    Remote Receiver Panel Key Lock Background Color Splash Screen My Screen English Front Table Front+Top Off BenQ BenQ 4. Press MENU/EXIT twice* on the projector or remote control to leave and save the settings. *The first press leads you back to the main menu and the second press closes the
  • BenQ MX716 DLP Projector | User Manual - Page 23
    forget the password. Print out this manual (if necessary) and write the password you used in this manual, and keep the manual in a safe place for later recall. Setting a password Once a password has been set and the power on lock is activated, the projector cannot be used unless the correct
  • BenQ MX716 DLP Projector | User Manual - Page 24
    six-digit password, or if you did not record the password in this manual, and you absolutely do not remember it, you can use the password recall code, and contact BenQ Customer Center. projector. Recall Code: 0 2 1 2 3. Seek help from the local BenQ service center to decode the number. You may
  • BenQ MX716 DLP Projector | User Manual - Page 25
    you should you ever forget it. Password Keep this manual in a safe place. 5. Confirm the new password by re-entering the new password. 6. You have successfully assigned a new password to the projector. Remember to enter the new password next time the projector is started. 7. To leave the OSD menu
  • BenQ MX716 DLP Projector | User Manual - Page 26
    display picture results, you should select and use an input signal which outputs at this resolution. Any other resolutions will be scaled by the projector depending upon the "aspect ratio" setting, which may cause some image distortion or loss of picture clarity. See "Selecting the aspect ratio" on
  • BenQ MX716 DLP Projector | User Manual - Page 27
    the center of the picture. Press the key repeatedly until the picture size is suitable for your need. 2. Use the directional arrows ( , , , ) on the projector or remote control to navigate the picture. 3. To restore the picture to its original size, press AUTO. You can also press ZOOM. When the key
  • BenQ MX716 DLP Projector | User Manual - Page 28
    can be displayed on those unused black areas. 1. Auto: Scales an image proportionally to fit 4. 16:9: Scales an image so that it is the projector's native resolution in its displayed in the center of the horizontal or vertical width. This is suitable screen with a 16:9 aspect ratio. for the
  • BenQ MX716 DLP Projector | User Manual - Page 29
    : Maximizes the brightness of the projected image. This mode is suitable for environments where extra-high brightness is required, such as using the projector in well lit rooms. 2. Presentation mode: Is designed for presentations. The brightness is emphasized in this mode to match PC and notebook
  • BenQ MX716 DLP Projector | User Manual - Page 30
    when User 1 or User 2 is selected. Based on your needs, you can make adjustments to these functions by highlighting them and pressing / on the projector or remote control. Adjusting Brightness The higher the value, the brighter the image. And the lower the setting, the darker the image. Adjust this
  • BenQ MX716 DLP Projector | User Manual - Page 31
    preference. If you have purchased a test disc which contains various color test patterns and can be used to test the color presentation on monitors, TVs, projectors, etc, you can project any image from the disc on the screen and enter the 3D Color Management menu to make adjustments. To adjust the
  • BenQ MX716 DLP Projector | User Manual - Page 32
    To activate the presentation timer, press and press / to highlight On and press ENTER. 8. A confirmation message displays. Highlight Yes and press ENTER on the projector or remote control to confirm. You will see the message "Timer is On" displaying on the screen. The timer starts counting when the
  • BenQ MX716 DLP Projector | User Manual - Page 33
    freeze the image. The word "FREEZE" will display in the upper left corner of the screen. To release the function, press any key on the projector or remote control. If your remote control has the following keys, please note that they cannot be pressed to release the function: LASER, #1, #4, PAGE UP
  • BenQ MX716 DLP Projector | User Manual - Page 34
    is between 0°C-35°C. Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and ambient temperature is between 0°C and 35°C. The projector will be over cooled, if you turn the mode on under such a condition. To activate the High Altitude Mode: 1. Press MENU/EXIT and then press
  • BenQ MX716 DLP Projector | User Manual - Page 35
    . 2. Press to highlight Volume and press / to select a desired sound level. If available, you can also press MUTE on the remote control to toggle projector audio between on and off. Turning off the Power On/Off Ring Tone To turn off the ring tone: 1. Repeat steps 1-2 above. 2. Press to highlight
  • BenQ MX716 DLP Projector | User Manual - Page 36
    remote computers when they are properly connected to the same local area network. MX716 MX717 Cable connection If you are in a DHCP environment: 1. Take a RJ45 cable and connect one end to the RJ45 LAN input jack of the projector and the other end to the RJ45 port on your Ethernet or router
  • BenQ MX716 DLP Projector | User Manual - Page 37
    you can use any computer that is on the same local area network to control the projector. • If you are using Microsoft Internet Explorer, make sure it is version 7.0 or higher. • The screenshots in this manual are for reference only, and may differ from the actual design. 1. Enter the address of the
  • BenQ MX716 DLP Projector | User Manual - Page 38
    and the person in charge of it. ii. You can adjust the Network Settings. iii. Once set, access to the remote network operation on this projector has been password-protected. iv. Once set, access to the tools page has been password-protected. After making the adjustments, press the Send button and
  • BenQ MX716 DLP Projector | User Manual - Page 39
    not properly shut down, to protect the lamp, when you attempt to re-start the projector, the fans will run for a MX717 few minutes to cool down. Press POWER or ON again to start the projector after the fans stop and the POWER indicator light turns orange. • Lamp life results will vary depending
  • BenQ MX716 DLP Projector | User Manual - Page 40
    Menu operation Menu system Please note that the on-screen display (OSD) menus vary according to the signal type selected and the projector model you are using. Main menu Sub-menu Options 1. DISPLAY 2. PICTURE 3. SOURCE Wall Color Off/Light Yellow/Pink/Light Green/Blue/Blackboard Aspect Ratio
  • BenQ MX716 DLP Projector | User Manual - Page 41
    Bottom-Right Count Down/Count Up On/Off Language 4. SYSTEM SETUP: Basic Projector Position Front Table/Rear Table/Rear Ceiling/Front Ceiling Menu Display 5 sec 30 min Quick Cooling On/Off Operation Settings Instant Restart (for the MX717 On/Off only) Blank Timer Disable/5 min/10 min/15 min
  • BenQ MX716 DLP Projector | User Manual - Page 42
    All Settings • Source • Picture Mode Current System Status • Resolution • Color System • Equivalent Lamp Hour • Firmware Version Note that the menu items are available when the projector detects at least one valid signal. If there is no equipment connected to the
  • BenQ MX716 DLP Projector | User Manual - Page 43
    or reduces the projected image. See "Magnifying and searching for details" on page 27 for details. This projector features a 3D function which enables you to enjoy the 3D movies, videos, and sporting events in a inversion of the image depth, enable this function to correct the problem. Operation 43
  • BenQ MX716 DLP Projector | User Manual - Page 44
    choose the pattern you need. Press ENTER to activate the pattern. Pre-defined picture modes are provided so you can optimize your Picture Mode projector image set-up to suit your program type. See "Selecting a picture mode" on page 29 for details. Reference Mode Selects a picture mode that best
  • BenQ MX716 DLP Projector | User Manual - Page 45
    Space" on page 26 for details. Presentation Timer Language Projector Position Menu Settings Reminds the presenter to finish the presentation Display (OSD) menus. See "Using the menus" on page 22 for details. The projector can be installed on a ceiling or behind a screen, or with one or more
  • BenQ MX716 DLP Projector | User Manual - Page 46
    cooling time will be shortened from a normal 90-second duration to approximately 30 seconds. Instant Restart (for the MX717 only) Selecting On enables you to restart the projector immediately within 90 seconds after turning it off. Panel Key Lock Background Color Splash Screen My Screen This
  • BenQ MX716 DLP Projector | User Manual - Page 47
    with your computer's so that you can connect the projector using a suitable RS-232 cable and update or download the projector's firmware. This function is intended for qualified service personnel. Selecting On enables the function and the projector displays the grid test pattern. It helps you adjust
  • BenQ MX716 DLP Projector | User Manual - Page 48
    mode and the COMPUTER 1 jack is correctly connected to devices. See "Connection" on page 17 for how to make the connection. Audio Pass Through The projector can play sound when it is in standby mode and the corresponding jacks are correctly connected to devices. Press / to choose the source that you
  • BenQ MX716 DLP Projector | User Manual - Page 49
    , SECAM, YUV, or RGB. Equivalent Lamp Hour Displays the number of hours the lamp has been used. Firmware Version Shows the firmware version of your projector. Operation 49
  • BenQ MX716 DLP Projector | User Manual - Page 50
    wax, alcohol, benzene, thinner or other chemical detergents. These can damage the case. Storing the projector If you need to store the projector for an extended time, please follow the instructions below: • Make sure the temperature and humidity of the storage area are within the recommended range
  • BenQ MX716 DLP Projector | User Manual - Page 51
    power consumption by 20%. If the Economic mode is selected, the light output will be reduced and result in darker projected pictures. Setting the projector in Economic mode also extends the lamp operation life. To set Economic mode, go into the SYSTEM SETUP: Advanced > Lamp Settings > Lamp Mode menu
  • BenQ MX716 DLP Projector | User Manual - Page 52
    the lamp becomes too hot. Turn the power off and let the projector cool for 45 minutes. If the Lamp or Temp indicator still lights replaced before the projector will operate normally. Press ENTER to dismiss the message. WARNING Out of Lamp Usage Time Replace lamp (refer to User Manual) Then reset
  • BenQ MX716 DLP Projector | User Manual - Page 53
    lamp cover from the projector. 4. Remove and dispose of the protection film. • Do not turn the power on with the lamp cover removed. • Do not insert your fingers between the lamp and the projector. The sharp edges inside the projector may cause injuries. 2 1 2 MX717 MX716 1 MX717 Maintenance 53
  • BenQ MX716 DLP Projector | User Manual - Page 54
    5. Disconnect the lamp connector from the projector as illustrated (for the MX717). 6. Loosen the screw that secures the lamp. 7. Lift the handle so that it stands up. 8. Use the handle to slowly pull the lamp out of the projector. • Pulling it too quickly may cause the lamp to break and scatter
  • BenQ MX716 DLP Projector | User Manual - Page 55
    the MX717). • Loose screw may cause a bad connection, which could result in malfunction. • Do not over tighten the screw. MX717 2 1 MX716 2 1 13. Replace the new protection film that comes with the new lamp. 14. Replace the lamp cover on the projector. 1 MX717 MX716 2 2 MX717 1 Maintenance
  • BenQ MX716 DLP Projector | User Manual - Page 56
    the lamp cover. • Loose screw may cause a bad connection, which could result in malfunction. • Do not over tighten the screw. MX716 MX717 16. Connect the power and restart the projector. Do not turn the power on with the lamp cover removed. Resetting the lamp timer 17. After the startup logo, open
  • BenQ MX716 DLP Projector | User Manual - Page 57
    Stand-by mode. Off Powering up. Off Normal operation. • The projector needs 90 seconds to cool down as it was abnormally shut down Orange Off Red Green Orange Red Green The projector has shut down automatically. If you try to reRed start the projector, it will shut down again. Please contact
  • BenQ MX716 DLP Projector | User Manual - Page 58
    Troubleshooting The projector does not turn on. Cause Remedy There is no power from the power cord. Attempting to turn the projector on again during the cooling process. Plug the power cord into the AC power jack on the projector, and plug the power cord into the power outlet. If the power
  • BenQ MX716 DLP Projector | User Manual - Page 59
    Projector specifications All specifications are subject to change without notice. Optical Control Resolution 1024 x 768 XGA RS-232 serial control 9 pin x 1 Display system IR receiver x 2 1-CHIP DMD USB port (Mini-B x 1) Lens F/Number F = 2.59-2.87 Lamp 12V trigger x 1 (Max. 1A) (MX717
  • BenQ MX716 DLP Projector | User Manual - Page 60
    Dimensions MX716 MX717 244.12 104.07 252 120.5 311.81 51.1 58.25 339 42 50.5 Unit: mm 60 Specifications
  • BenQ MX716 DLP Projector | User Manual - Page 61
    Ceiling mount installation 160 MX716 Ceiling Mount screw: M4 x 8 (Max L = 8 mm) 137 74.19 80 46.21 115 446.15 397.90 364.40 95.33 156.33 311.81 MX717 119.21 244.12 242.04 149.50 84 228 87 130 191 339 133 237.4 Unit: mm Specifications 61 448 397.40 364.40
  • BenQ MX716 DLP Projector | User Manual - Page 62
    162.000 146.25 30.240 57.280 80.000 100.00 • *Supported timing for non-3D and 3D signal with Frame Sequential and Top-Bottom format. **Supported timing for non-3D and 3D signal with Frame Sequential format. ***Supported timing for non-3D and 3D signal with Top-Bottom format. 62 Specifications
  • BenQ MX716 DLP Projector | User Manual - Page 63
    depending on the EDID file and VGA display card. It is possible that the above 3D timings cannot be chosen on VGA display card. Supported timing for HDMI (HDCP) input Resolution Mode VGA_60 640 x 480 VGA_72 VGA_75 VGA_85 720 x 400 720 x 400_70 SVGA_60* SVGA_72 800 x 600 SVGA_75 SVGA_85
  • BenQ MX716 DLP Projector | User Manual - Page 64
    a 1080i(1125i)@60Hz or 1080i(1125i)@50Hz signal may result in slight image vibration. **Supported timing for non-3D and 3D signal with Frame Sequential format. Supported timing for Component-YPbPr input Timing Resolution Vertical Horizontal Pixel Frequency Frequency (Hz) Frequency (kHz
  • BenQ MX716 DLP Projector | User Manual - Page 65
    Supported timing for Video and S-Video inputs Video mode NTSC** PAL SECAM PAL-M PAL-N PAL-60 NTSC4.43 Horizontal 60 50 60 60 Color sub-carrier Frequency (MHz) 3.58 4.43 4.25 or 4.41 3.58 3.58 4.43 4.43 **Supported timing for non-3D and 3D signal with Frame Sequential format. Specifications 65
  • BenQ MX716 DLP Projector | User Manual - Page 66
    ). To obtain warranty service, immediately notify the in accordance with BenQ's written instructions, especially the ambient humidity must feet, and avoiding to operate the projector in a dusty environment. This , chemical, manual or otherwise, revision or changes. *DLP, Digital Micromirror Device
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
Welcome
MX716/MX717 Digital Projector
User Manual