BenQ PDP46W1 User Guide
BenQ PDP46W1 - 46W1 - 46" Plasma Panel Manual
 |
UPC - 840046000813
View all BenQ PDP46W1 manuals
Add to My Manuals
Save this manual to your list of manuals |
BenQ PDP46W1 manual content summary:
- BenQ PDP46W1 | User Guide - Page 1
Remote Controller 7. Connection to External Equipment 19 7.1 PC Module 7.2 PC Module + Video Module 7.3 PC Module + Enhanced PC Module 7.4 Connection to External Laud Speakers Factory Settings 34 12. Cleaning and Simple Troubleshooting 35 C:\pdp \User Menu\UM_BenQ.doc 5/30/2002 8:42 PM i Wuys - BenQ PDP46W1 | User Guide - Page 2
AC cords listed below for each area: USA UL Canada CSA Germany used in accordance with the instructions, may cause harmful interference radio/TV technician for help FCC Warning To assure continued FCC compliance, the user user's authority to operate this device. C:\pdp \User Menu\UM_BenQ.doc 5/30/ - BenQ PDP46W1 | User Guide - Page 3
Use: The product is a 46" WVGA (wide-screen with VGA resolution) Plasma Display with the features of super thinness, high quality, flat display and non-radiation. It has passed the Class-B EMC test and the UL and CSA safety certifications, and is an ideal product for individual users and commercial - BenQ PDP46W1 | User Guide - Page 4
, use and maintenance of the product. Read the following safety instructions before starting the operation. The User's Manual uses the following symbols to ensure a safe operation and prevent the marked one may cause fire or electric shock. C:\pdp \User Menu\UM_BenQ.doc 5/30/2002 8:42 PM 3 Wuys - BenQ PDP46W1 | User Guide - Page 5
contact the manufacturer immediately after confirming that the product doesn't smoke any more. Don't try to repair the product by yourself to avoid any risk. C:\pdp \User Menu\UM_BenQ.doc 5/30/2002 8:42 PM 4 Wuys - BenQ PDP46W1 | User Guide - Page 6
dist or high humidity: Fire or electric shock may be caused when the product is installed in a place with heavy dust or high humidity. Instructions about moving the product: Make sure that the power connector and other plugs are all unplugged before moving the product. The product shall be moved - BenQ PDP46W1 | User Guide - Page 7
comector ATTENTION Insert batteries in accordance with instructions: Insert the batteries with correct polarities (positive of the batteries, hurt operators and contaminate the remote controller. Don't charge the batteries attached with the pdp \User Menu\UM_BenQ.doc 5/30/2002 8:42 PM 6 Wuys - BenQ PDP46W1 | User Guide - Page 8
the instructions of the manufacturer and by using the support Display by yourself. 3.18 Unplug the power connector and contact with qualified service staffs when the following incidents occur: The power supply or connector fails. Liquid sprays or any object drops in the Display. C:\pdp \User - BenQ PDP46W1 | User Guide - Page 9
with the User's Manual. It may take more time to remove the damage cause by inappropriate adjustment. The Display drops or damages under any circumstances. The performance of the Display changes substantially. 3.19 When it is required to replace parts, make sure that the service staffs sues - BenQ PDP46W1 | User Guide - Page 10
Plasma Display Panel with a thickness of 9.8cm. It provides quality image displays supports the quality image input of DVD and HDTV (480P/720P/1080i), as well as the images of TV machine supports PC PIP Function: The user may watch video user may customize their favorite color temperature. The user - BenQ PDP46W1 | User Guide - Page 11
Warranty X 1 User's Manual X 1 Power Cable X 1 Note: Depending on the shipping areas, the actual attached to the product might be different. S- terminal X 1 D-sub 15 PIN Signal Line X 1 AV- terminal X 1 Component Video Cable x 1 Battery UM-4 X 2 Remote controller X 1 C:\pdp \User Menu\UM_BenQ.doc - BenQ PDP46W1 | User Guide - Page 12
of the power cable into the power jack on the wall. Press the power switch (1: Down, 2: Up). The power indicator in the front of the Display product lights red, indicating that the products is in a standby state. C:\pdp \User Menu\UM_BenQ.doc 5/30/2002 8:42 PM 11 Wuys - BenQ PDP46W1 | User Guide - Page 13
and is used to receive remote control signals. The indicator shows whether the power of the Display is turned on. Indicator following sequence: Display→Image (for PC input) or AV system (for Video input)→Audio→Language and Screen Saver→Misc.→Status (circular display). C:\pdp \User Menu\UM_BenQ. - BenQ PDP46W1 | User Guide - Page 14
following sequence: Brightness→Contract→Volume→Height→Bass→Left/Right Volume (circular display). The adjustment is made in conjunction with the buttons. ◄/►: A. can increase the volume.. STANDBY/ON: It is used to activate the Display or bring it in the standby state. Is the trademark of SRS Labs - BenQ PDP46W1 | User Guide - Page 15
connector of the PC display card. The Display is used as a PC monitor. B. DVI: Connects to the DVI-I digital output connector of the PC display card. The display is used as a PC monitor. C. RS-232: Is a D-SUB 9 PIN male terminal used as a port for serial communication. C:\pdp \User Menu\UM_BenQ.doc - BenQ PDP46W1 | User Guide - Page 16
card. C. D-SUB In: Connects to the D-SUB 15 PIN analog output connector of the PC display card. The Display is used as a PC monitor. D. PC Audio: Connects to the audio output connector of the PC sound card. The Display can output PC sound. C:\pdp \User Menu\UM_BenQ.doc 5/30/2002 8:42 PM 15 Wuys - BenQ PDP46W1 | User Guide - Page 17
6.4 Remote controller: 6.4.1 Functions of keys: 1. Power: Press this key in the standby state to turn on the Display. Press this key when turning on the Display to return to D-SUB Terminal, RGB 4 (Enhanced PC Module RGB BNC Terminal). C:\pdp \User Menu\UM_BenQ.doc 5/30/2002 8:42 PM 16 Wuys - BenQ PDP46W1 | User Guide - Page 18
display): Display display). B. PC Module + Video Module: RGB display). C. PC Module + Enhanced PC Module: RGB 1→RGB 2→RGB 3→RGB 4 (circular display). Note: When pressing this button to display -picture closed (circular display). 14. Freeze: key to mute the laud speakers. Press it again to restore - BenQ PDP46W1 | User Guide - Page 19
away from heat sources. 2. Don't wipe the remote controller with wet cloth moistened with volatile solvent, such as benzene or thinner. 3. When the response of the Display becomes abnormal, check whether the energy of the batteries is too weak. C:\pdp \User Menu\UM_BenQ.doc 5/30/2002 8:42 PM 18 - BenQ PDP46W1 | User Guide - Page 20
The DVI connector of the Display is DVI-I, which does not provide analog signals. 2. The RS-232 connector of the Display provides a transmission interface for professional technicians to update firmware, without providing additional communication functions. C:\pdp \User Menu\UM_BenQ.doc 5/30/2002 - BenQ PDP46W1 | User Guide - Page 21
CVBS Out terminal connects to another TV or display and transmits the signals input via CVB In to the display. The Display uses BNC terminal to ensure the quality of the output signal. The display to be connected might need an adapter for the transmission. C:\pdp \User Menu\UM_BenQ.doc 5/30/2002 - BenQ PDP46W1 | User Guide - Page 22
Enhanced PC Module The functions of D-SUB, DVI and RS-232 terminals are same as the PC module. The Display provides 4 sets of RGB inputs (3 analog and 1 digital) and 1 set of RGB outputs. 3 sets output for RGB 3 and RGB 4 input signals. C:\pdp \User Menu\UM_BenQ.doc 5/30/2002 8:42 PM 21 Wuys - BenQ PDP46W1 | User Guide - Page 23
sure that the wire is fastened firmly. Note 1: The wiring of the left and right speakers is the same. Note 2: When connecting to external speakers, set the speaker to External mode in the "Audio" page of the "OSD Menu". (Refer to 7.7.2.) C:\pdp \User Menu\UM_BenQ.doc 5/30/2002 8:42 PM 22 Wuys - BenQ PDP46W1 | User Guide - Page 24
the "INPUT" key repeatedly to select the signal source you want. The signal sources are displayed in the following sequence (depending on the module, the sequence might be different): Where: RGB 4: Digital DVI-D input on enhanced PC module. C:\pdp \User Menu\UM_BenQ.doc 5/30/2002 8:42 PM 23 Wuys - BenQ PDP46W1 | User Guide - Page 25
key repeatedly to select the signal source for PC and enhanced PC modules. The signal sources are displayed in the following sequence: Where: 1. PC Module: 2. PC Module + Enhanced PC Mode: RGB RGB 4: 5-axial BNC input on enhanced PC module. C:\pdp \User Menu\UM_BenQ.doc 5/30/2002 8:42 PM 24 Wuys - BenQ PDP46W1 | User Guide - Page 26
at the left or right side. The pages are displayed in the following sequence (circular display): Display Image or AV system Audio Language and Screen Saver the volume and press and hold the "Vol -" to decrease the volume. The Display is in the mute state when you press the "Mute" key, and restore - BenQ PDP46W1 | User Guide - Page 27
to adjust the viewing area. 8.6 Other Functions: When the display cannot be showed after Main Screen must be a PC display; and 3. The video image source must be connected appropriately. The position to display the sub-picture and the video image source must be set from the OSD menu. C:\pdp \User - BenQ PDP46W1 | User Guide - Page 28
Speaker Advanced Mode PIP Settings Gamma Color Space PC User Status Resolution V Frequency H Frequency PIP Input PIP System Display page. Note: The User Color Temp. page of the PC module is adjustable. No other adjustable pages are added for the PC module. C:\pdp \User Menu\UM_BenQ.doc 5/30 - BenQ PDP46W1 | User Guide - Page 29
can select the most suitable format for the selected signal source. Press the "◄/►" keys on the remote controller or the Display to select Full, Fill Aspect Ratio, 4:3 to 16"9, LB to 16:9, LB Subtitles to 16:9 and Anamorphic sequentially. C:\pdp \User Menu\UM_BenQ.doc 5/30/2002 8:42 PM 28 Wuys - BenQ PDP46W1 | User Guide - Page 30
balance and mute, are same when inputting PC or Video signals. Internal and external speakers can be selected on this page. Note: Audio output does not function when the protect the screen when a static screen is displayed for a long time. C:\pdp \User Menu\UM_BenQ.doc 5/30/2002 8:42 PM 29 Wuys - BenQ PDP46W1 | User Guide - Page 31
plasma display is coated with phosphor (same as CRT). When the screen is displaying Display or the "►" key on the remote controller in the "User Color Temp" option to complete the settings as shown in Fig. 5-2. Note: To select "User PC signals. The "Display" page is same as the "Display" page in Video - BenQ PDP46W1 | User Guide - Page 32
(6) Status: PC VIDEO This page displays resolution and vertical/horizontal frequency when inputting PC signals. When PIP is used, the sub-picture source and systems are also displayed. The signal source and system is displayed when inputting Video signals. C:\pdp \User Menu\UM_BenQ.doc 5/30/2002 - BenQ PDP46W1 | User Guide - Page 33
9. Optional Accessories: Stand Speaker Wall Mount Inclination 0 - 25° adjustable Ceiling Mount C:\pdp \User Menu\UM_BenQ.doc 5/30/2002 8:42 PM 32 Wuys - BenQ PDP46W1 | User Guide - Page 34
Pin (Analog RGB Output) PC Sound Input 3.5 jacket Terminal Safety Rules Standard Accessories EMC Class B, UL, CSA, CE 1 Remote Controller, 4 No. 4 Batteries, 1 AC Line, 1 VGA Line, 1 S-Line, 1 Power Cable, Each 1 User's Manual and Warranty C:\pdp \User Menu\UM_BenQ.doc 5/30/2002 8:42 PM 33 Wuys - BenQ PDP46W1 | User Guide - Page 35
56.25 36.00 9 800×600 37.90 60.32 40.00 10 800×600 46.90 75.00 49.50 11 800×600 48.08 72.19 50.00 12 VESA VESA VESA VESA VESA Mac.(H+V) VESA VESA VESA VESA When the signal received by the Display exceeds the allowed range, an warning message "Out Of Range" appears on the screen. - BenQ PDP46W1 | User Guide - Page 36
Display with a dry cloth after the cleaning. 12.4 Simple Troubleshooting: Check the Display in accordance with the following instructions OSD option selected matches with the input The remote controller doesn't function normally. signal. Check pdp \User Menu\UM_BenQ.doc 5/30/2002 8:42 PM 35 - BenQ PDP46W1 | User Guide - Page 37
or color is incorrect. The external speaker does not sound. The power indicator flashes output signal may affect the display of the image. Check that the line is connected appropriately. Check that the Display is not in "Mute" Chapter 10. C:\pdp \User Menu\UM_BenQ.doc 5/30/2002 8:42 PM 36 Wuys
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
 |
 |
Table of Contents
1.
Safety Guidelines: ------------------------------------------------------------------------------------- 1
2.
Before Use:-------------------------------------------------------------------------------------------- 2
2.1
Open the Package
2.2
Installation
3.
Safety -------------------------------------------------------------------------------------------------- 3
4.
Product Features -------------------------------------------------------------------------------------- 9
5.
Standard Components-------------------------------------------------------------------------------- 10
6.
Names and Functions of Parts: --------------------------------------------------------------------- 11
6.1
Side View
6.2
Front View
6.3
Rear View
6.4
Remote Controller
7.
Connection to External Equipment----------------------------------------------------------------- 19
7.1
PC Module
7.2
PC Module + Video Module
7.3
PC Module + Enhanced PC Module
7.4
Connection to External Laud Speakers
8.
Basic Operation--------------------------------------------------------------------------------------- 23
8.1
Power ON/OFF
8.2
Selection of Input Mode
8.3
OSD Option Adjustment
8.4
Sound Adjustment
8.5
Zooming of the Screen
8.6
Other Functions
8.7
OSD Functions
9.
Optional Accessories--------------------------------------------------------------------------------- 32
10. Specifications ----------------------------------------------------------------------------------------- 33
11. Factory Settings--------------------------------------------------------------------------------------- 34
12. Cleaning and Simple Troubleshooting------------------------------------------------------------- 35
C:\pdp
\User Menu\UM_BenQ.doc 5/30/2002 8:42 PM
Wuys
i