BenQ PalmPro 7763P User Manual for the 7763P and 7765PE projectors
BenQ PalmPro 7763P Manual
View all BenQ PalmPro 7763P manuals
Add to My Manuals
Save this manual to your list of manuals |
BenQ PalmPro 7763P manual content summary:
- BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 1
Thank you very much for purchasing this Acer DLP™ Technology Projector. Please read this operating guide to ensure correct use of the device. After reading this manual, keep it for future reference. Outline This DLP™ Technology Projector can display various computer signals and NTSC/PAL/SECAM video - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 2
optical, chemical, manual or otherwise, SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PLUS SERVICE PERSONNEL. AND PLEASE READ ALL OF THESE INSTRUCTIONS BEFORE YOU OPERATE YOUR PROJECTOR. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE . Safety Instructions 1. Read all of these instructions - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 3
5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product. 6. The Standard Remote Control contains a low-power laser that acts as a pointing device during presentations. The light beam may cause injury if pointed directly into a - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 4
20 D Source Page 21 Other Correspondent Remote Functions and Messages 22 Maintenance and Troubleshooting 24 A Lamp Replacement 24 B Cleaning the Lens 24 C Troubleshooting 24 Specifications 26 A Optical 26 B Electrical 26 C Mechanical 26 D Preset Display Resolution Table - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 5
Introduction 1 Projector Features A Image Resolution Fully compatible with true SVGA(63P)/XGA(65PE), and supports SXGA using advanced intelligent compression technology. The advanced intelligent compression technology enables it to present clear compression SVGA/XGA images without line omission. B - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 6
G Ceiling Mount and Rear Screen Projection The projector is equipped with a full mirror scan conversion function (vertical/horizontal mirror), which allows the image to be reversed for ceiling mounting as well as for rear projection applications. H AV box An AV box is optional, and users can - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 7
Figure 2 Rear view of 7763P/65PE C BOTTOM (figure) Figure 3 Bottom view of 7763P/65PE Installation A. Positioning • This projector is basically designed to project on a flat projection surface. • This projector can be focused from 1.5m-14m. • Refer to the figure below to adjust the screen size. - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 8
is not designed to protect the projector from external shock. Do not transport the projector in an unsuitable transport case by using a courier or transport service. This may cause damage to the projector. English 4 - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 9
Figure 6 Moving the projector Accessories Please check and make sure your box contains everything listed below. If any pieces are missing, contact your dealer. Please save the original box and packing materials in case you ever need to ship the unit. English 5 - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 10
Figure 7 Accessories of 7763P/65PE English 6 - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 11
Connection A Connecting the Projector to Computer/Notebook 2 Figure 8 Connection to PC Figure 9 Connection to notebook English 7 - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 12
B Connecting the Projector to Macintosh/Power Book Figure 10 Connection to Macintosh Figure 11 Connection to Power Book English 8 - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 13
Operation 3 Turn On/Off Procedure A Power on Press the Standby/On key to turn on the lamp. The LED will blink green during warm up and then light solid green. "INPUT SIGNAL DETECTED, ACTIVATING AUTO IMAGE" will be displayed on the screen after the projector has identified the input signal; " - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 14
MAIN UNIT FUNCTION Menu To call the OSD menu. To enter sub pages. To select items. 4 To navigate through sub pages or to increase the scale bar number. 3 To navigate through sub pages or to decrease the scale bar number. Exit To exit from the current page or OSD menu, and save setting - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 15
B Remote Control Figure 13 Remote control The remote control allows you to operate the function keys on the projector and to emulate mouse function when the projector is connected to a computer. Main Unit Function Standby/On To turn the projection lamp on and off. Freeze Pressing this button - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 16
Be sure to follow instructions in placing batteries into the remote control units. • Push and slide the lid in the direction of the arrow. • Install two ' be shorter than four meters (13 feet). Figure 15 Range Usage and Replacement of Lamp The light source lamp has a limited service life. English 12 - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 17
a malfunction. Replace the lamp with a new one. A Lamp/temperature Status LED Indicator 1. Lamp in excess of service hours When the LED light is a continuous red, it means the lamp has exceeded (*1500) service hours. After this light appears, it is advisable to replace the projection lamp as soon as - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 18
Figure 17 Lamp replacement warning signal II replacement warning signal II Figure 18 Lamp 2. Lamp is not well attached If the LED blinks rapidly, it indicates that the lamp is not attached properly. 3. Temperature is too high If the projector's internal temperature is too hot to operate safely, - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 19
iii. iv. v. Loosen the screw and pull the handle to remove the lamp. • If the screw is not loosened completely, you could hurt your fingers. • Do not insert your hand into the box after the lamp has been removed. (There are optical parts inside that, if touched, could result in color unevenness, - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 20
Lamp Replacement Procedure Step 1 Step 2 Figure 19 Lamp replacement: Step 1, Step 2, Step 3 Step 3 English 16 - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 21
Resetting Lamp Timer If replacing the lamp after 1500 hours of operation, please carry out the following operation within 10 minutes of powering on. OSD FUNCTION Press the Exit button on the projector for 3 seconds or the Exit button on the remote control for 3 seconds and display the total lamp - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 22
Input PC input without AV box status Subpage Display Image Control PC input with AV box Display Image Control Source Video input with AV box Display Image Control Source A Display Page When a PC is the input source, there will be only four items on this page: Keystone, Brightness, Contrast, - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 23
, the projector determines the best fit of the image to the screen. If flicker occurs on a projected image, users may try to adjust the H. Phase manually. If the projected image is too wide or too narrow for the screen, users may turn Auto Image off and adjust the H. Size - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 24
, Mirror, Blank, Auto Off, and Reset (Fig. 25). Figure 25 Control sub-page Language Setting effects To select the OSD menu language. Eight languages are supported: English, French, German, Italian, Spanish, Swedish and Dutch. (See Figure 25). English 20 - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 25
Mirror Blank Auto Off Reset To select Normal projection, H-Invert projection, VInvert projection, or H/V Invert projection. To select the background color when the image/sound is blanked. To set the time to turn the power off after the start up screen is displayed and no signal is detected or sync - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 26
Other Correspondent Remote Functions and Messages OSD Source Freeze Mute Volume Magnify FUNCTION The selected source will be displayed at the bottom right of the screen for 3 seconds after selecting the source. (PC, VIDEO, S-VIDEO). The image will be frozen when the "Freeze" button is pressed. A " - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 27
Drag Blank (Macintosh/ Powerbook) mouse. When an image has been magnified, press the "Disk Pad" button to move around the display area (the mouse function is not available when magnify function is on). This button is a toggle switch to turn on/off the drag function of the remote mouse. Press this - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 28
amount of cleaner. 3. Lightly wipe the clean cloth over the lens. 4. Affix the lens cover whenever the projector is not in use. C Troubleshooting PROBLEMS NO POWER NO PICTURE IMAGE ISN'T SQUARE ON THE SCREEN POOR COLOR IMAGE IS BLURRED REMOTE CONTROL DOESN'T WORK TRY THESE SOLUTIONS Plug the - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 29
NO SOUND Stand within 4 meters (13 feet) of the unit. Make sure nothing is blocking the receiver on the control pad. Check audio cable connection from audio input source. Adjust audio source. Press "Volume" (+) button. Press "Mute" button. English 25 - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 30
Specifications 5 A Optical DMD TM 1-chip 0.7" DMDTM (Digital Micromirror Device) Lens Manual zoom ,manual focus (F=2.8 to 3.1 f=31 to 40) Lamp mercury lamp 150W Image size 25" to 300" Projection Distance 1.5 to 14 M Light Output 800 ANSI lumens Contrast Ratio - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 31
D Preset Display Resolution Table Resolution 640x350 640x400 720x400 720x400 640x480 640x480 640x480 640x480 800x600 800x600 800x600 800x600 800x600 832x624 1024x768 1024x768 1024x768 1024x768 1280x1024 H Sync (kHz) 31.5 37.9 31.5 37.9 31.5 37.9 35 43.3 35.2 37.9 46.9 48.1 53.7 49.7 48.4 56.5 60.0 - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 32
Appendix Guideline to Acer 7763P/65PE AV box 1. Features and Connection AV Connection Port This box is compatible with RCA input, S-Video input, audio output . Figure 27 Connection of AV box Speaker RCA Jack For Video and Audio Input from VHS or V8 S Video Port For S-Video Input Phone Jack - BenQ PalmPro 7763P | User Manual for the 7763P and 7765PE projectors - Page 33
Connecting the Box Please follow the instruction here to place the AV box: Figure 29 Side View of AV box Figure 28 Bottom View of AV box To attach the AV box
Digital Multimedia Projector
PalmPro 7763P/65PE
OPERATING GUIDE
Thank you very much for purchasing this Acer DLP™ Technology
Projector.
Please read this operating guide to ensure correct use of the device.
After reading this
manual, keep it for future reference.
Outline
Model name
This DLP™ Technology
Projector can display
various computer signals and NTSC/PAL/SECAM
video signals.
Features
(1)
High brightness
(2)
High resolution
(3)
Compact size, light weight for portability
(4)
RGB output terminal
(5)
RS232 Communication
(6)
Mouse emulation
(7)
Complies with VESA DDC1/2B specifications
English I