Home » BenQ Manuals » Projectors » BenQ SL703S » Manual Viewer

BenQ SL703S User Guide

BenQ SL703S - DLP Micro SVGA Projector Manual

UPC - 750519056141

View all BenQ SL703S manuals

Add to My Manuals
Save this manual to your list of manuals

BenQ SL703S manual content summary:

BenQ SL703S | User Guide - Page 1
DLP PROJECTOR SL 703S USER'S GUIDE Thank you for purchasing the Benq DLP Projector. Please read this user's guide to ensure correct use of the device. Save this user's guide for future reference. OUTLINE This DLP Projector can display various computer signals and NTSC/PAL/SECAM video signals.
BenQ SL703S | User Guide - Page 2
by Benq Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise
BenQ SL703S | User Guide - Page 3
Disclaimer iii
BenQ SL703S | User Guide - Page 4
of Contents Benq Corporation Introduction 1 Safety Instructions 1 Warranty 2 Limited Warranty 2 Shipping Contents 3 Optional Accessories 3 Projector Description 4 Projector 4 External Control Panel 5 Adjuster 6 Projector Features 6 Remote Control Description 7 Remote Control Features
BenQ SL703S | User Guide - Page 5
Benq Corporation Troubleshooting 23 Status Messages 24 Specifications 25 Projector Specifications 25 Timing Chart 26 Dimensions 27 iv Table of Contents
BenQ SL703S | User Guide - Page 6
Benq Corporation Caution TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER -SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. PLEASE READ THIS USER'S GUIDE BEFORE YOU OPERATE YOUR PROJECTOR. SAVE THIS USER'S GUIDE FOR FUTURE REFERENCE . Safety Instructions 1. Read this user
BenQ SL703S | User Guide - Page 7
Corporation Save this user's guide: The information contained in this manual will assist you in operating and maintaining your Personal Projector. Warranty Limited Warranty Benq warrants this product against any defects in material and workmanship, under normal usage and storage during a period of
BenQ SL703S | User Guide - Page 8
The Projector is shipped with the necessary cables required for standard PC, Macintosh or laptop computer connections. Carefully unpack and verify that you have all the items shown below. If any of these items are missing, please contact your place of purchase. Optional Accessories 1. Spare lamp kit
BenQ SL703S | User Guide - Page 9
Benq Corporation Projector Description Projector 1. External control panel (see next page) 2. Projection lens 3. Front adjustment feet 4. IR remote sensor 5. Ventilation grill 6. Kensington lock 7. AC power cord input 8. S-video connector 9. Video connector 10. D-sub connector (for computer/ HDTV
BenQ SL703S | User Guide - Page 10
External Control Panel Keystone/ Left Menu Auto Source Benq Corporation Exit Keystone/ Right Power Lamp status indicator • The Infrared Remote Receiver (Front and Rear) allows the projector to accept signals from the remote control. For best results, be sure to aim the control toward the sensor
BenQ SL703S | User Guide - Page 11
and be locked. Projector Features The Projector integrates high performance optical engine projection and user-friendly design to deliver high reliability and ease of use experience. The Projector offers the following features: • Compact and portable unit • Full-function remote control • One key
BenQ SL703S | User Guide - Page 12
Remote Control Description Benq Corporation ( Remote Control Features The remote control sensors are located in the front/ back of the projector. The distance between the sensor and the remote control should not exceed 6 meters. Introduction 7
BenQ SL703S | User Guide - Page 13
Benq Corporation FREEZE The image can be frozen when FREEZE is pressed. A "Pause" icon will appear in the lower right restored to its original size. To return to the normal display mode, press the RETURN button. (This function can be used in combination with FREEZE. ) AA Zoom In 8 Introduction
BenQ SL703S | User Guide - Page 14
Benq Corporation Installing or Replacing Batteries • Push and slide the battery compartment lid in the direction shown. replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions. Introduction 9
BenQ SL703S | User Guide - Page 15
Connecting to Various Equipment It only takes a few seconds to connect your projector to your computer/notebook, VCR or other systems. However, a Mac adapter (an optional accessory) is needed for connection for Macintosh users. Computer/ HDTV Audio Video S-Video S-Video/ Video 10 Installation
BenQ SL703S | User Guide - Page 16
OPERATION Start Up 1. Plug the power cord into a wall socket. 2. Press POWER for 1 second. Benq Corporation Projector Power Remote Control Power • The back-lit POWER key blinks green and stays green when the power is turned on. (When the power is turned off, there
BenQ SL703S | User Guide - Page 17
. Press + to correct keystoning at the top of the image. Press - to correct keystoning at the bottom of the image. Projector Auto Source Remote control Auto Adjustment In some cases, you may have to optimize the picture quality manually. To do this, press the AUTO key on the control panel of the
BenQ SL703S | User Guide - Page 18
Benq Corporation Source Selection When several input sources are available, press the SOURCE key to make a selection from the control panel of the projector or the remote control. Projector Remote Mute Control Langauge OSD OSD Time Auto Off Reset Lamp hour PIP Main page: PIP Source PIP Size
BenQ SL703S | User Guide - Page 19
Benq Corporation 1. Display Menu Corrects the keystone of the image. Keystone Brightness Adjusts the brightness of image. Contrast Adjusts the degree of difference between darkness and
BenQ SL703S | User Guide - Page 20
to the screen, Adjusts the horizontal position of image. H-position Benq Corporation Adjusts the vertical positon of image. V-position Color Temp. Adjusts the color temperature to fit your preference. Shows the current resolution. Users have 2 options for the image ratio. 1. 4:3 (Normal) 2. 16
BenQ SL703S | User Guide - Page 21
Benq Corporation 3. Source Menu 1. Mirror 1. Default 2. Ceiling mounted projection 3. Rear screen projection 3. 4. Ceiling mounted and rear screen projection 2. 4. Source Volume Selects sources between PC, Video, S-video, and YPbPr. Adjusts the volume level. Treble Bass Adjusts the
BenQ SL703S | User Guide - Page 22
4.Control Menu Language OSD OSD Time Auto Off Reset Lamp hour Benq Corporation Language sets the OSD to display in one of 7 languages. Use Left/Right key to select the languages: English, French, German, Italian, Spanish, Simplified Chinese and Traditional Chinese. Selects a desired OSD position.
BenQ SL703S | User Guide - Page 23
Benq Corporation Shutdown 1. Press POWER and a warning message will prompt up. To turn off the projector, Press POWER again. 2. The fan will continue to run for approximately 60 seconds. Power Power 3. Disconnect the power cord from the wall socket. Caution Please
BenQ SL703S | User Guide - Page 24
MAINTENANCE Benq Corporation Lamp Information Use and Replacement of Lamp When the Lamp Indicator lights up red or a message displays to suggest the time of lamp replacement, please change a new lamp or consult your dealer. An old lamp could cause a malfunction to the projector and may explode.
BenQ SL703S | User Guide - Page 25
your fingers. Do not insert your hand into the box after the lamp is removed. If you touch the optical parts inside, this could cause color unevenness. 4. Replace the lamp with a new one. Insert it into the projector, and tighten the screws firmly. Loose screws may cause a bad connection, which
BenQ SL703S | User Guide - Page 26
Benq Corporation Caution To reduce the risk of severe burns, allow the projector to cool for at least 45 minutes before replacing the lamp. To reduce the risk of injuries to fingers and damage to internal components, use caution when removing lamp glass that has shattered into sharp pieces. To
BenQ SL703S | User Guide - Page 27
of parts Part number Mac Adapter (switchable 20.20118.A15 120W Lamp module 60.J1322.001 HDTV Cable 50.J2401.001 Ordering Parts or Getting Information For product information, product assistance, service information, or to order accessories, please contact Benq corporation. at http://www.benq.com
BenQ SL703S | User Guide - Page 28
TROUBLESHOOTING Benq Corporation Common Problems & Solutions PROBLEMS TRY THESE SOLUTIONS NO POWER • Plug the power cord into the AC inlet. • Plug the power cord into the power inlet. • Wait two minutes after the projector is turned off before turning the projector back on. • Check for the
BenQ SL703S | User Guide - Page 29
Benq Corporation Status Messages On Screen Messages SEARCHING INPUT SIGNAL DETECTED, ACTIVATING AUTO IMAGE SYNC IS OUT OF RANGE CHANGE THE LAMP, AND RESET THE LAMP TIMER CHANGE THE LAMP, THE POWER WILL TURN OFF AFTER 20 HOURS CHANGE THE LAMP! Description Projector is searching for input.
BenQ SL703S | User Guide - Page 30
Benq Corporation Projector Specifications Technical Specifications Note: All specifications are subject to change without notice. General Product name Model name Optical Display system Lens F/Number Lamp Speaker Personal Projector SL703S (SVGA) 800X600 SVGA 1-CHIP DMD F/2.6 120W VIP lamp AC100 ~
BenQ SL703S | User Guide - Page 31
Benq Corporation Timing Chart Resolution 640x350 640x400 720x400 720x400 640x480 640x480 640x480 640x480 800x600 800x600 800x600 800x600 800x600 832x624 1024x768 1024x768 1024x768 1024x768 1280x1024 H Sync (kHz)
BenQ SL703S | User Guide - Page 32
DIMENSIONS Benq Corporation 220 mm 175 mm 52 mm Dimensions 27

Section	Page
DLP Projector	1
SL 703S	1
Features	1
1. High Brightness	1
2. High Resolution	1
3. Compact Size, Feather Weight for Portability	1
4. Durable Magnesium Alloy Body	1
5. RGB Output Terminal	1
6. One Touch Auto-Adjustment Function	1
7. Easy Keystone Adjustment	1
Fill this in!!	2
Introduction 1	4
Installation 10	4
Operation 11	4
Maintenance 19	4
Troubleshooting 23	5
Specifications 25	5
Dimensions 27	5
Introduction	6
Safety Instructions	6
1. Read this user’s guide before you operate your projector and save it for future reference.	6
2. The lamp becomes extremely hot during operation. Allow the projector to cool for approximately...	6
3. Never replace lamp assembly or any electronic components unless the projector is unplugged.	6
4. To reduce the risk of electric shock, do not disassemble this appliance. Take it to a qualifie...	6
5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing ...	6
6. This product is capable of displaying inverted images for ceiling mount installation. Please u...	6
7. To prevent lamps from bursting, change the lamp after changing the mounting position of projec...	6
Warranty	7
Limited Warranty	7
Shipping Contents	8
Optional Accessories	8
1. Spare lamp kit	8
2. Macintosh Adaptor	8
Projector Description	9
Projector	9
1. External control panel (see next page)	9
2. Projection lens	9
3. Front adjustment feet	9
4. IR remote sensor	9
5. Ventilation grill	9
6. Kensington lock	9
7. AC power cord input	9
8. S-video connector	9
9. Video connector	9
10. D-sub connector (for computer/ HDTV input)	9
11. Audio input	9
12. Rear adjustment feet	9
13. Lamp access door (underneath unit)	9
External Control Panel	10
Adjuster	11
1. Lift the projector up and press the adjuster button to release the adjuster.	11
2. The adjuster will drop into position and be locked.	11
Projector Features	11
Remote Control Description	12
Remote Control Features	12
FREEZE	13
Installing or Replacing Batteries	14
Installation	15
Screen Size	15
Connecting to Various Equipment	15
Operation	16
Start Up	16
1. Plug the power cord into a wall socket.	16
2. Press POWER for 1 second.	16
3. Switch on all connected equipment.	16
Digital Keystone Correction	17
Auto Adjustment	17
Source Selection	18
Menu System	18
1. Display Menu	19
2. Image Menu	20
3. Source Menu	21
1. Default	21
2. Ceiling - mounted projection	21
3. Rear screen projection	21
4. Ceiling - mounted and rear screen projection	21
4.Control Menu	22
5. PIP Menu	22
Shutdown	23
1. Press POWER and a warning message will prompt up. To turn off the projector, Press POWER again.	23
2. The fan will continue to run for approximately 60 seconds.	23
3. Disconnect the power cord from the wall socket.	23
Maintenance	24
Lamp Information	24
Use and Replacement of Lamp	24
LED Status Indicators	24
Lamp Replacement	24
1. Press the POWER button to switch off the projector. Disconnect the power cord from the outlet ...	25
2. Loosen the screw and remove the lamp cover. If the lamp is hot, avoid burns by waiting 45 minu...	25
3. Loosen the 3 screws. (It is strongly recommended you use a magnetic-headed screwdriver.) Pull ...	25
4. Replace the lamp with a new one. Insert it into the projector, and tighten the screws firmly. ...	25
5. Re-install the lamp cover and tighten the screw. Do not turn on the power with the lamp cover ...	25
Resetting Lamp Hours	26
OSD	26
FUNCTION	26
Service Information	27
Accessories (Included in the standard package)	27
Optional Accessories (Not Included in the standard package)	27
Ordering Parts or Getting Information	27
Troubleshooting	28
Status Messages	29
Specifications	30
Projector Specifications	30
Technical Specifications	30
Timing Chart	31
Resolution	31
H Sync (kHz)	31
V Sync (Hz)	31
Remark	31
640x350	31
31.5	31
70.1	31
640x400	31
37.9	31
85.1	31
VESA	31
720x400	31
31.5	31
70.0	31
720x400	31
37.9	31
85.1	31
VESA	31
640x480	31
31.5	31
60.0	31
VESA	31
640x480	31
37.9	31
72.8	31
VESA	31
640x480	31
35.0	31
66.7	31
Macintosh	31
640x480	31
43.3	31
85.0	31
VESA	31
800x600	31
35.2	31
56.3	31
VESA	31
800x600	31
37.9	31
60.3	31
VESA	31
800x600	31
46.9	31
75.0	31
VESA	31
800x600	31
48.1	31
72.2	31
VESA	31
800x600	31
53.7	31
85.1	31
VESA	31
832x624	31
49.7	31
74.5	31
Macintosh	31
1024x768	31
48.4	31
60.0	31
VESA	31
1024x768	31
56.5	31
70.1	31
VESA	31
1024x768	31
60.0	31
75.0	31
VESA	31
1024x768	31
68.7	31
85.0	31
VESA	31
1280x1024	31
64.0	31
60.0	31
VESA	31