BenQ SU917 Full HD Network Projector User Manual

BenQ SU917 Full HD Network Projector Manual

Get BenQ SU917 Full HD Network Projector PDF manuals and user guides View all BenQ SU917 Full HD Network Projector manuals
Add to My Manuals
Save this manual to your list of manuals

BenQ SU917 Full HD Network Projector manual content summary:

  • BenQ SU917 Full HD Network Projector | User Manual - Page 1
    SU917 Digital Projector User Manual
  • BenQ SU917 Full HD Network Projector | User Manual - Page 2
    Table of contents Important safety instructions 3 Introduction 7 Projector features 7 Shipping contents 8 Projector exterior view 51 Maintenance 67 Care of the projector 67 Lamp information 68 Troubleshooting......... 76 Specifications 77 Dimensions 78 Ceiling mount installation 78 Timing
  • BenQ SU917 Full HD Network Projector | User Manual - Page 3
    that you follow the instructions mentioned in this manual and marked on the product. Safety Instructions 1. Please read this manual before 4. you operate protector or uninterruptible power supply (UPS). 3. Refer servicing to qualified service personnel. 6. Do not block the projection lens with
  • BenQ SU917 Full HD Network Projector | User Manual - Page 4
    Safety Instructions (Continued) 7. The lamp becomes extremely hot during operation. Allow circumstances should you ever undo or remove any other covers. Refer servicing only to suitably qualified professional service personnel. 9. Never replace the lamp assembly or any electronic components
  • BenQ SU917 Full HD Network Projector | User Manual - Page 5
    Safety Instructions (Continued) 13. Do not place this projector in any of 14. Do not block the ventilation holes. the following environments. - when it is not fully horizontal may cause a malfunction of, or damage to, the lamp. 3000 m (10000 feet) 0 m (0 feet) Important safety instructions 5
  • BenQ SU917 Full HD Network Projector | User Manual - Page 6
    Safety Instructions (Continued) 16. Do not stand the projector on end 18. Do not wet, projector. disconnect it from the power supply's wall socket and call BenQ to have the projector serviced. 17. Do not step on the projector or place any objects upon it. Besides probable physical damage
  • BenQ SU917 Full HD Network Projector | User Manual - Page 7
    a rectangular image from any angle • Corner Fit allows you to adjust four corners of the projected image • Equipped with HDMI & MHL connection supporting HDCP • SmartEco™ starts your dynamic power saving • LAN display for network control and web server • LAN display 4-1 (maximum 4PC/ NB display to
  • BenQ SU917 Full HD Network Projector | User Manual - Page 8
    specific regions. Please consult your dealer for detailed information. projector Remote control or remote control without laser (depending on region) & batteries Power cord Quick start guide Warranty card* VGA cable User manual CD 8 Introduction
  • BenQ SU917 Full HD Network Projector | User Manual - Page 9
    Optional accessories 1. Spare lamp kit 2. Ceiling mount kit 3. BenQ wireless dongle 4. carry bag 5. 3D glasses Introduction 9
  • BenQ SU917 Full HD Network Projector | User Manual - Page 10
    Projector exterior view Front/upper side 1 2 3 4 5 Rear/lower side 12 13 14 15 16 17 18 19 20 21 22 23 34 33 32 31 30 29 28 27 26 25 1. 2. 3. 4. 5. 6. 6 7. 7 8 8. 9. 9 10. 11. 10 12. 11 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. Lens
  • BenQ SU917 Full HD Network Projector | User Manual - Page 11
    . 3. MENU/EXIT Indicates the status of the lamp. Lights up or flashes when the lamp has Turns on the On-Screen Display (OSD) developed a problem. See "Indicators" menu. Goes back to previous OSD on page 74 for details. menu, exits and saves menu settings. 10. SOURCE 4. Keystone/Arrow keys
  • BenQ SU917 Full HD Network Projector | User Manual - Page 12
    Mounting the projector We want you to have a pleasant experience using your BenQ projector, so we need to bring this safety matter to your attention to prevent possible damage to person and property. If you intend to mount your projector on the ceiling or wall, we strongly recommend that you use a
  • BenQ SU917 Full HD Network Projector | User Manual - Page 13
    Remote control 5. Keystone/Arrow keys ( / Left, 1 14 / Right) 15 Displays 2D Keystone page and 2 16 adjusts the horizontal keystone values. 3 4 5 6 7 4 8 9 10 11 12 13 See "Correcting 2D keystone" on page 17 30 for details. 5 When the On-Screen Display (OSD) 18 menu is activated,
  • BenQ SU917 Full HD Network Projector | User Manual - Page 14
    12. NETWORK SETTING Operating the laser pointer Displays Network Settings menu. See The Laser Pointer is a for details. presentation aid for 13. Number keys 14. OFF professionals. It emits red colored light when you press it and the indicator lights up red. Turns off the projector. See "
  • BenQ SU917 Full HD Network Projector | User Manual - Page 15
    Infra-Red (IR) remote control sensor is located on the front of the projector. The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR remote control sensor to function correctly. The distance between the remote control and the sensor should not exceed 8
  • BenQ SU917 Full HD Network Projector | User Manual - Page 16
    . • Replace only with the same or equivalent type recommended by the battery manufacturer. • Dispose of the used battery according to the battery manufacturer's instructions. • Never throw a battery into a fire. There may be danger of an explosion. • If the battery is dead or if you will not be
  • BenQ SU917 Full HD Network Projector | User Manual - Page 17
    Positioning your projector Choosing a location Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and distance between the
  • BenQ SU917 Full HD Network Projector | User Manual - Page 18
    Obtaining a preferred projected image size The distance from the projector lens to the screen, the zoom setting (if available), and the video format each factors in the projected image size. The projector should always be placed horizontally level (like flat on a table), and positioned directly
  • BenQ SU917 Full HD Network Projector | User Manual - Page 19
    Projection dimensions Refer to "Dimensions" on page 78 for the center of lens dimensions of this projector before calculating the appropriate position. 16:10 Screen diagonal H Screen Center of lens W Vertical offset Projection distance Screen size Distance from screen (mm) Vertical offset
  • BenQ SU917 Full HD Network Projector | User Manual - Page 20
    Shifting the projection lens vertically The vertical lens shift control provides flexibility for installing your projector. It allows the projector to be positioned slightly above or below the top level of the projected images. The lens shift (offset) is expressed as a percentage of the projected
  • BenQ SU917 Full HD Network Projector | User Manual - Page 21
    Connection When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly inserted. • In the connections shown below, some cables may not be included with the
  • BenQ SU917 Full HD Network Projector | User Manual - Page 22
    1. Audio cable 2. Microphone 3.5 mini jack cable 3. HDMI cable 4. VGA cable 5. USB cable (mini-B to type A) 6. VGA to DVI-A cable 7. MHL cable (MicroUSB to HDMI) 8. USB port for power charging 9. USB flash drive/hard disk drive/wireless dongle/keyboard/mouse 10. Component Video to VGA (DSub)
  • BenQ SU917 Full HD Network Projector | User Manual - Page 23
    well as on the screen, you can connect the MONITOR OUT signal output jack on the projector to an external monitor following the instructions below: To connect the projector to a monitor: 1. Connect the projector to a computer as described in "Connecting a computer" on page 22. 2. Take a suitable VGA
  • BenQ SU917 Full HD Network Projector | User Manual - Page 24
    varies depending on the input signal from COMPUTER-1 or COMPUTER-2 jack. • If you wish to use this connection method when the projector is in standby mode, make sure the MONITOR OUT function is turned on in the SYSTEM SETUP: Advanced > Standby Settings menu. See "Standby Settings" on page 64 for
  • BenQ SU917 Full HD Network Projector | User Manual - Page 25
    it to an HDMI source device like a DVD player, a DTV tuner, a display or a notebook computer. HDMI (High-Definition Multimedia Interface) supports uncompressed video data transmission between compatible devices like DTV tuners, DVD players and displays over a single cable. It provides pure digital
  • BenQ SU917 Full HD Network Projector | User Manual - Page 26
    Color Space" on page 37 for details. To connect the projector to an HDMI source device (using MHL cable): Make sure if your mobile device supports MHL (Mobile High-Definition Link) standard before connecting. 1. Take an MHL cable (MicroUSB to HDMI) and connect one end to the USB jack of the
  • BenQ SU917 Full HD Network Projector | User Manual - Page 27
    Connecting an S-Video/composite source device Examine your Video source device to determine if it has an unused S-Video/ composite output jack available: • If it has both jacks, use the S-Video output jack for connection as the S- Video terminal provides better picture quality than the Video
  • BenQ SU917 Full HD Network Projector | User Manual - Page 28
    Operation Starting up the projector 1. Plug the power cord into the projector and into a power outlet. Check that the POWER indicator light on the projector lights orange after power has been applied. • Please use the original accessories (e.g. power cable) only with the device to avoid possible
  • BenQ SU917 Full HD Network Projector | User Manual - Page 29
    4. If the projector is activated for the first time, select your OSD language following the on-screen instructions. 5. If you are prompted for a password, press the arrow keys to enter a six digit password. See "Utilizing the password function" on page 34 for details. 6.
  • BenQ SU917 Full HD Network Projector | User Manual - Page 30
    projector installation area compared to conventional projectors with limited positioning in front of the screen. To correct this, you will need to manually correct it following one of these steps. • Using the projector or remote control Press / / / to display the Keystone page. Press / to adjust
  • BenQ SU917 Full HD Network Projector | User Manual - Page 31
    2. Press to select Keystone and press Mode/ Enter. 3. Press / / / to adjust the keystone values. Adjusting corner fit Manually adjust four corners of the image by setting the horizontal and vertical values. • Using the OSD menu 1. Select Corner Fit in the DISPLAY menu and
  • BenQ SU917 Full HD Network Projector | User Manual - Page 32
    Fine-tuning the image size and clarity 1. Adjust the projected image to the size that you need using the zoom slide lever. 2. Then sharpen the image by using the focus ring. 32 Operation
  • BenQ SU917 Full HD Network Projector | User Manual - Page 33
    Using the menus The projector is equipped with On-Screen Display (OSD) menus for making various adjusents and settings. Below is the overview of the OSD menu. Main menu icon Main menu Highlight (selected) Sub-menu Status Current input Press Menu/Exit to the The following example describes how
  • BenQ SU917 Full HD Network Projector | User Manual - Page 34
    returns to the Security Settings page. IMPORTANT: The digits being input will display as asterisks on-screen. Write your selected password down here in this manual in advance or right after the password is entered so that it is available to you should you ever forget it. Password Keep this
  • BenQ SU917 Full HD Network Projector | User Manual - Page 35
    another six-digit password, or if you did not record the password in this manual, and you absolutely do not remember it, you can use the password recall number and turn off your projector. 3. Seek help from the local BenQ service center to decode the number. You may be required to provide proof of
  • BenQ SU917 Full HD Network Projector | User Manual - Page 36
    SOURCE menu is On (which is the default of this projector) if you want the projector to automatically search for the signals. You can also manually cycle through the available input signals. 1. Press SOURCE on the projector or remote control. A source selection bar displays. 36 Operation
  • BenQ SU917 Full HD Network Projector | User Manual - Page 37
    2. Press / until your desired signal is selected and press Mode/Enter. Once detected, the selected source information will display on the screen for seconds. If there is multiple equipment connected to the projector, repeat steps 1-2 to search for another signal. • The brightness level of the
  • BenQ SU917 Full HD Network Projector | User Manual - Page 38
    The picture can only be navigated after the picture is magnified. You can further magnify the picture while searching for details. Selecting the aspect ratio The 'aspect ratio' is the ratio of the image width to the image height. With the advent of digital signal processing, digital display devices
  • BenQ SU917 Full HD Network Projector | User Manual - Page 39
    3. 4:3: Scales an image so that it is displayed in the center of the screen with a 4:3 aspect ratio. This is most suitable for 4:3 images like computer monitors, standard definition TV and 4:3 aspect 4:3 picture DVD movies, as it displays them without aspect alteration. 4. 16:9: Scales an image so
  • BenQ SU917 Full HD Network Projector | User Manual - Page 40
    Optimizing the image Selecting a picture mode The projector is preset with several predefined picture modes so that you can choose one to suit your operating environment and input signal picture type. To select an operation mode that suits your need, you can follow one of the following steps. •
  • BenQ SU917 Full HD Network Projector | User Manual - Page 41
    7. The settings will be saved when selecting. Using Wall Color In the situation where you are projecting onto a colored surface such as a painted wall which may not be white, the Wall Color feature can help correct the projected picture's color to prevent possible color difference between the
  • BenQ SU917 Full HD Network Projector | User Manual - Page 42
    On is the default and recommended selection for this projector. When Off is selected, the Color Temperature function is not available. Selecting a Color Temperature The options available for color temperature* settings vary according to the signal type selected. 1. Cool: Makes images appear bluish
  • BenQ SU917 Full HD Network Projector | User Manual - Page 43
    any image from the disc on the screen and enter the 3D Color Management menu to make adjusents. To adjust the settings: 1. Go to the PICTURE menu and select 3D Color Management. 2. Press Mode/Enter and the 3D Color Management page displays. 3. Select Primary Color and press / to select a color
  • BenQ SU917 Full HD Network Projector | User Manual - Page 44
    Setting the presentation timer The presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function: 1. Go to the SYSTEM SETUP: Basic > Presentation Timer menu and press Mode/Enter to
  • BenQ SU917 Full HD Network Projector | User Manual - Page 45
    Hiding the image In order to draw the audience's full attention to the presenter, you can use ECO BLANK to hide the screen image. Press any key on the projector or remote control to restore the image. Eco Blank wording appears at the screen while the image is hidden. When this function is activated
  • BenQ SU917 Full HD Network Projector | User Manual - Page 46
    over-heating. In cases like this, you should switch to High Altitude mode to solve these symptoms. However, this is not to state that this projector can operate under any and all harsh or extreme conditions. Adjusting the sound The sound adjusents made as below will have an effect on the projector
  • BenQ SU917 Full HD Network Projector | User Manual - Page 47
    Personalizing the projector menu display The On-Screen Display (OSD) menus can be set according to your preferences. The following settings do not affect the projection settings, operation, or performance. • Language in the SYSTEM SETUP: Basic menu sets your familiar language for the OSD menus.
  • BenQ SU917 Full HD Network Projector | User Manual - Page 48
    Use Teaching Template Making writing on the board easier for teachers, you can use build-in template by OSD. Open the OSD menu and go to the DISPLAY > Teaching Template . Choose Blackboard/Whiteboard > Off/Letter Formation/Worksheet/Coordinate Chart. The Teaching Template displays. Teaching
  • BenQ SU917 Full HD Network Projector | User Manual - Page 49
    images files in JPEG, GIF, TIFF, PNG and BMP formats. • A square box will display on the filename for unidentified characters. • Thai filename is not supported. • Files in GIF, TIFF, PNG and BMP formats can be displayed for the file size smaller than WXGA (1280 x 800) only. • If a folder consists
  • BenQ SU917 Full HD Network Projector | User Manual - Page 50
    Main menu USB Reader Sub-menu Slideshow Slideshow Direction Slideshow Timing Repeat Slideshow Auto Rotation Best Fit Options Slide Right/Slide Down 3 /4 /5 On/Off On/Off On/Off Shutting down the projector 1. Press II Power on the projector. A confirmation message displays prompting you. If you
  • BenQ SU917 Full HD Network Projector | User Manual - Page 51
    Menu operation Menu system Please note that the on-screen display (OSD) menus vary according to the signal type selected. Main menu 1. DISPLAY Sub-menu Options Wall Color Aspect Ratio 2D Keystone Corner Fit Position Phase H. Size Digital Zoom 3D Teaching Template 3D mode 3D Sync Invert Save 3D
  • BenQ SU917 Full HD Network Projector | User Manual - Page 52
    2. PICTURE 3. SOURCE Picture Mode Dynamic/Presentation/sRGB/Cinema/(3D)/ User 1/User 2 Reference Mode Dynamic/Presentation/sRGB/Cinema/(3D) Brightness Contrast Color Tint Sharpness Color Temperature Cool/Normal/Warm Color Temperature Fine Tuning R Gain/G Gain/B Gain/R Offset/ G Offset/B
  • BenQ SU917 Full HD Network Projector | User Manual - Page 53
    4. SYSTEM SETUP: Basic Presentation Timer Timer Period 1~240 minutes Timer Display Always/1 min/2 min/3 min/ Never Timer Position Top-Left/Bottom-Left/TopRight/Bottom-Right Timer Counting Direction Count Down/Count Up Sound Reminder On/Off On/Off Yes/No Language Projector
  • BenQ SU917 Full HD Network Projector | User Manual - Page 54
    4. SYSTEM SETUP: Basic Direct Power On On/Off Signal Power On On/Off Operation Settings Auto Power Off Disable/3 min/10 min/15 min/25 min/30 min min/20 Quick Cooling On/Off Instant Restart On/Off Blank Timer Disable/5 min/10 min/15 min/ 20 min/25 min/30 min Sleep Timer Disable/30 min
  • BenQ SU917 Full HD Network Projector | User Manual - Page 55
    5. SYSTEM SETUP: Advanced High Altitude Mode On/Off Yes/No Mute On/Off Volume 0~10 Audio Settings Microphone Volume 0~10 Power On/Off Ring Tone On/Off Lamp Mode Normal/Economic/SmartEco Reset lamp timer Yes/No Lamp Settings Lamp Information Lamp Usage Time Normal Economic SmartEco
  • BenQ SU917 Full HD Network Projector | User Manual - Page 56
    Wired LAN 5. SYSTEM SETUP: Advanced Network Settings Reset All Settings Wireless LAN Remote Desktop Projection Login Code Broadcasting AMX Device Discovery Mac Address Reset/Cancel 6. INFORMATI Current System Status ON Status DHCP IP Address Subnet Mask Default Gateway DNS Server Apply Status
  • BenQ SU917 Full HD Network Projector | User Manual - Page 57
    ratio" on page 38 for details. Corrects vertical and horizontal keystonings of the image. See "Correcting 2D keystone" on page 30 for details. Manually adjust four corners of the image by setting the horizontal and vertical values. See "Adjusting corner fit" on page 31 for details. Displays the
  • BenQ SU917 Full HD Network Projector | User Manual - Page 58
    format, press / to choose a 3D mode. 3D Sync Invert When you discover the inversion of the image depth, enable this function to correct the problem. Save 3D Settings Save current 3D settings. Apply 3D Settings Apply saved 3D settings. Provides some templates as teaching aids. Teachers can use them
  • BenQ SU917 Full HD Network Projector | User Manual - Page 59
    2. PICTURE menu FUNCTION Picture Mode Reference Mode Brightness Contrast Color Tint Sharpness DESCRIPTION Pre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. See "Selecting a picture mode" on page 40 for details. Selects a picture mode
  • BenQ SU917 Full HD Network Projector | User Manual - Page 60
    2. PICTURE menu FUNCTION Color Temperature Color Temperature Fine Tuning 3D Color Management Reset Picture Setting Quick Auto Search Color Space Conversion DESCRIPTION See "Selecting a Color Temperature" on page 42 for details. This function is only available when User 1/2 is selected. See "
  • BenQ SU917 Full HD Network Projector | User Manual - Page 61
    4. SYSTEM SETUP: Basic menu FUNCTION Presentation Timer Language Projector Installation Menu Settings DESCRIPTION Reminds the presenter to finish the presentation within a certain time frame. See "Setting the presentation timer" on page 44 for details. Timer Period Sets a preferred length of time
  • BenQ SU917 Full HD Network Projector | User Manual - Page 62
    Signal Power On Selecting On the projector will turn on automatically when VGA signal is detected. Selecting Off the projector has to be turnned on manually (by keypad or remote). See "Starting up the projector" on page 28 for details. Auto Power Off Allows the projector to turn off automatically if
  • BenQ SU917 Full HD Network Projector | User Manual - Page 63
    Baud Rate Test Pattern Web Control Lock See "BenQ Network Projector Operation Guide" for details. Selects a baud rate that is identical with your suitable RS-232 cable. This function is intended for qualified service personnel. Selecting On enables the function and the projector displays the
  • BenQ SU917 Full HD Network Projector | User Manual - Page 64
    5. SYSTEM SETUP: Advanced menu FUNCTION DESCRIPTION Closed Caption Enable Activates the function by selecting On when the selected input signal carries closed captions. • Captions: An on-screen display of the dialogue, narration, and sound effects of TV programs and videos that are closed
  • BenQ SU917 Full HD Network Projector | User Manual - Page 65
    mode, system will charge the devices when they are connected to the projector via HDMI/MHL port. See "BenQ Network Projector Operation Guide" for details. Returns all settings to the factory preset values. The following settings will still remain: User 1, User 2, Projector Installation, Color Space
  • BenQ SU917 Full HD Network Projector | User Manual - Page 66
    6. INFORMATION menu FUNCTION Current System Status DESCRIPTION Source Shows the current signal source. Picture Mode Shows the selected mode in the PICTURE menu. Lamp Mode Shows the current lamp mode. Resolution Shows the native resolution of the input signal. 3D Format Shows the current 3D mode.
  • BenQ SU917 Full HD Network Projector | User Manual - Page 67
    detergents. These can damage the case. Storing the projector If you need to store the projector for an extended time, please follow the instructions below: • Make sure the temperature and humidity of the storage area are within the recommended range for the projector. Please refer to "Specifications
  • BenQ SU917 Full HD Network Projector | User Manual - Page 68
    Lamp information Getting to know the lamp hour When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by the built-in timer. The method of calculating the equivalent lamp hour is as follows: Total (equivalent) lamp hour = 1 (hours used in Economic mode
  • BenQ SU917 Full HD Network Projector | User Manual - Page 69
    Setting Auto Power Off This function allows the projector to turn off automatically if no input source is detected after a set period of time to prevent unnecessary waste of lamp life. To set Auto Power Off, go into the SYSTEM SETUP: Basic > Operation Settings > Auto Power Off menu and press / . The
  • BenQ SU917 Full HD Network Projector | User Manual - Page 70
    lamp warning displays will remind you to change the lamp. The warning messages below are for reference only. Please follow the actual on-screen instructions to prepare and replace the lamp. Status Message Install a new lamp for optimal performance. If the projector is normally run with Economic
  • BenQ SU917 Full HD Network Projector | User Manual - Page 71
    Replacing the lamp (FOR SERVICE PERSONNEL ONLY) • Hg - Lamp contains mercury. Manage in accordance with local disposal laws. See www.lamprecycle.org. • If lamp replacement is performed while the projector
  • BenQ SU917 Full HD Network Projector | User Manual - Page 72
    3. Remove the lamp cover by (a) sliding the cover toward the side of the projector and (b) lifting it off. • Do not turn the power on with the lamp cover removed. • Do not insert your fingers between the lamp and the projector. The sharp edges inside the projector may cause injuries. 4. Loosen the
  • BenQ SU917 Full HD Network Projector | User Manual - Page 73
    7. Tighten the screws that secure the lamp. • Loose screw may cause a bad connection, which could result in malfunction. • Do not over tighten the screws. 8. Ensure the handle is fully laid flat and locked in place. 9. Replace the lamp cover by sliding it into place. (a) (b) 10. Tighten the screw
  • BenQ SU917 Full HD Network Projector | User Manual - Page 74
    Indicators Light Status & Description POWER TEMP LAMP1 LAMP2 Orange Off Off Green Flashing Off Off Green Off Off Orange Flashing Off Off Red Off Off Green Off Red Red Flashing Off Off Red Off Red Off Red Off Off Green Off Green Green Off Green Off Green Off Off Red
  • BenQ SU917 Full HD Network Projector | User Manual - Page 75
    Green Flashing Green Off Green Green Flashing Flashing Off Off Thermal Sensor 2 short error Off Thermal IC #2 I2C Connection error Maintenance 75
  • BenQ SU917 Full HD Network Projector | User Manual - Page 76
    Troubleshooting The projector does not turn on. Cause Remedy Plug the power cord into the AC inlet on the There is no power from password is incorrect Cause You do not remember the password. Remedy Please see "Entering the password recall procedure" on page 35 for details. 76 Troubleshooting
  • BenQ SU917 Full HD Network Projector | User Manual - Page 77
    jack x 1 for audio input PC audio jack x 1 for microphone audio input RCA audio jack (L/R) x 2 USB type A x 2 Supports photo viewer & multimedia &1.5A charger USB mini B x 1 Supports USB display Environmental Requirements Operating temperature 0°C-40°C at sea level Operating relative humidity 10%-90
  • BenQ SU917 Full HD Network Projector | User Manual - Page 78
    Dimensions 339.3 mm (W) x 147.3 mm (H) x 260.3 mm (D) 260.3 339.3 147.3 Ceiling mount installation 127 Ceiling mount screw: M4 (Max L = 25 mm; Min L = 20 mm) 150 151.5 Unit: mm 237 63.5 134.5 78 Specifications 538 584.5 665 102 339.3 123 265.5
  • BenQ SU917 Full HD Network Projector | User Manual - Page 79
    Timing chart Supported timing for PC input Resolution Timing Horizontal Frequency (KHz) Vertical Frequenc y (Hz) Pixel Frequency (MHz) 3D Field Sequent ial 3D top bott om 3D side
  • BenQ SU917 Full HD Network Projector | User Manual - Page 80
    .000 30.240 57.280 80.000 100.000 ◎ ◎ • The timings showing above may not be supported due to EDID file and VGA graphic card limitations. It is possible that some timings cannot be chosen. Supported timing for HDMI (HDCP) input Resolution 640 x 480 720 x 400 800 x 600 1024 x 768 1152 x 864
  • BenQ SU917 Full HD Network Projector | User Manual - Page 81
    ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎ The timings showing above may not be supported due to EDID file and VGA graphic card limitations. It is possible that some timings cannot be chosen . Supported 3D signal for Video input Video mode NTSC PAL SECAM
  • BenQ SU917 Full HD Network Projector | User Manual - Page 82
    Supported timing for Component-YPbPr input Timing 480i 480p 576i 576p 720/50p 720/60p 1080/50i 1080/60i 1080/24P 1080/25P 1080/30P 1080/
  • BenQ SU917 Full HD Network Projector | User Manual - Page 83
    parts (labor included). To obtain warranty service, immediately notify the dealer from which you to operate the product in accordance with BenQ's written instructions, especially the ambient humidity must be in-between mechanical, magnetic, optical, chemical, manual or otherwise, without the prior
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
Digital Projector
User Manual
SU917