BenQ mp777 User Manual

BenQ mp777 Manual

Get BenQ mp777 PDF manuals and user guides View all BenQ mp777 manuals
Add to My Manuals
Save this manual to your list of manuals

BenQ mp777 manual content summary:

  • BenQ mp777 | User Manual - Page 1
    MP776/MP777 Digital Projector User Manual Welcome
  • BenQ mp777 | User Manual - Page 2
    menu display 39 Controlling the projector through a Lan environment 40 Shutting down the projector 43 Menu operation 44 Maintenance 52 Care of the projector 52 Lamp information 53 Troubleshooting 59 Specifications 60 Projector specifications 60 Dimensions 61 Ceiling mount installation
  • BenQ mp777 | User Manual - Page 3
    operation as this could cause the objects to become heated and deformed or even cause a fire. To temporarily turn off the lamp, press BLANK on the projector or remote control. 4. Always open the lens shutter or remove the lens cap when the projector lamp is on. Important safety instructions 3
  • BenQ mp777 | User Manual - Page 4
    into contact with live parts. The only user serviceable part is the lamp which has its own removable cover. Under no circumstances should you ever undo or remove any other covers. Refer servicing only to suitably qualified professional service personnel. 9. Never replace the lamp assembly or any
  • BenQ mp777 | User Manual - Page 5
    it is not fully horizontal may cause a malfunction of, or damage to, the lamp. 3000 m (10000 feet) 0 m (0 feet) 16. Do not stand the projector on end vertically. Doing so may cause the projector to fall over, causing injury or resulting in damage to the projector. Important safety instructions 5
  • BenQ mp777 | User Manual - Page 6
    projector. Liquids spilled into the projector may cause it to fail. If the projector does become wet, disconnect it from the power supply's power outlet and call BenQ to have the projector serviced the projector should its attachment to the mounting bracket become loose. Hg - Lamp contains mercury
  • BenQ mp777 | User Manual - Page 7
    projector cool in a shorter time • FAQ to troubleshoot operational problems with one quick key press • Presentation timer for better control of time during presentations • High quality manual • The lamp brightness will decline over time and may vary within the lamp manufacturers specifications. This
  • BenQ mp777 | User Manual - Page 8
    warranty card is only supplied in some specific regions. Please consult your dealer for detailed information. Projector Power cord VGA cable Quick start guide User manual CD Warranty card* Remote control with batteries Optional accessories 1. Spare lamp kit 2. Ceiling mount kit Soft carry
  • BenQ mp777 | User Manual - Page 9
    21 22 10 11 12 13 4 1. External control panel (See "Controls and functions" on page 10 for details.) 2. Lamp cover 3. Vent (heated air exhaust) 4. Quick-release button 5. Lens cover 6. Focus ring and Zoom ring 7. Vent (cool air intake) 8. Front IR remote sensor 9. Projection lens 10. AC power jack
  • BenQ mp777 | User Manual - Page 10
    page 25 13. select the desired menu items and to make adjustments. "Locking control keys" on page 38, "Using the menus" on page 25 MODE/ENTER 5. Power Selects an available picture setup mode. Toggles the projector between standby mode and on. Activates the selected On-Screen Display (OSD) menu
  • BenQ mp777 | User Manual - Page 11
    Remote control For details, see the info. provided behind the hand sign . 5. CONTRAST 1 Adjusts contrast. 2 13 "Adjusting Contrast" on page 33 6. TEST PATTERN 3 14 Displays the test pattern. 4 "Test Pattern" on page 50 5 6 15 7. LASER 7 16 Emits visible laser pointer light for
  • BenQ mp777 | User Manual - Page 12
    Manually corrects distorted images resulting from an angled projection. "Correcting keystone" on page 28 19. Right/ Locks the buttons on the projector. "Locking control the select the desired menu items and to make back of the remote control prior to using it. adjustments. "Using the menus" on
  • BenQ mp777 | User Manual - Page 13
    that might obstruct the infra-red beam. • Operating the projector from the front • Operating the projector from the rear Approx. +15° Approx. +15° Replacing the remote control batteries 1. To open the battery cover, turn the remote control over to view its back, push on the finger grip on
  • BenQ mp777 | User Manual - Page 14
    is the suspended upside-down from the ceiling most common way to position the projector behind the screen. for quick setup and portability. Note that a special rear projection screen and the BenQ Projector Ceiling Mount Kit are required for this installation location. Set Rear Ceiling in the
  • BenQ mp777 | User Manual - Page 15
    proportionately. When determining the position of the screen and projector, you will need to account for both the projected image size and the vertical offset dimension, which are directly proportional to the projection distance. BenQ has provided a table of 4:3-aspect-ratio screen sizes to
  • BenQ mp777 | User Manual - Page 16
    in the "Distance from screen (mm)" column is 4246 mm. Looking across this row shows that a 120'' (about 3.0 m) screen is required. If you place the projector in a different position (to that recommended), you will have to tilt it down or up to center the image on the screen. In these situations
  • BenQ mp777 | User Manual - Page 17
    dimensions of this projector before 1846 2123 2400 2462 2831 3200 3077 3538 4000 3692 4246 4800 4615 5308 6000 6154 7077 BenQ recommends that if you intend to permanently install the projector, you should physically test the projection size and distance using the actual projector
  • BenQ mp777 | User Manual - Page 18
    for each source. 3. Ensure the cables are firmly inserted. • In the connections shown below, some cables may not be included with the projector (see "Shipping contents" on page 8). They are commercially available from electronics stores. • For detailed connection methods, see pages 19-22. Notebook
  • BenQ mp777 | User Manual - Page 19
    jack of the projector, and the other end to your external speakers (not supplied). Once connected, the audio can be controlled by the projector On-Screen on the projector to an external monitor following the instructions below: To connect the projector to a monitor: 1. Connect the projector to a
  • BenQ mp777 | User Manual - Page 20
    might be expected in home theater or home cinema applications. Any stereo audio input (if provided), is mixed into a common mono audio output through the projector speakers. If you have a separate sound system, you will most likely want to connect the audio output of your video source device to that
  • BenQ mp777 | User Manual - Page 21
    and the other end to your external speakers (not supplied). Once connected, the audio can be controlled by the projector On-Screen Display (OSD) menus. See "Audio Settings" on page 49 for details. • The projector is only capable of playing mixed mono audio, even if a stereo audio input is connected
  • BenQ mp777 | User Manual - Page 22
    and the other end to your external speakers (not supplied). Once connected, the audio can be controlled by the projector On-Screen Display (OSD) menus. See "Audio Settings" on page 49 for details. • The projector is only capable of playing mixed mono audio, even if a stereo audio input is connected
  • BenQ mp777 | User Manual - Page 23
    lens cover. If it is closed, it could become deformed due to the heat produced by the projection lamp. 3. Press Power on the projector or remote control to start the projector. As soon as the lamp lights up, a "Power On Tone" will be heard. The POWER indicator light flashes green and stays green
  • BenQ mp777 | User Manual - Page 24
    projector are not perpendicular to each other, the projected image becomes trapezoidal. To correct this situation, see "Correcting keystone" on page 28 for details. 2 1 Do not look into the lens while the lamp is on. The strong light from the lamp AUTO on the projector or remote control. Within 3
  • BenQ mp777 | User Manual - Page 25
    : Basic menu. SYSTEM SETUP: Basic Presentation Timer Language Projector Position Menu Settings Auto Power Off Blank Timer Panel Key Lock Sleep Timer Splash Screen English Front Table Disable Disable Off Disable BenQ 4. Press MENU/EXIT twice* on the projector or remote control to leave and save
  • BenQ mp777 | User Manual - Page 26
    manual, and keep the manual in a safe place for later recall. Setting a password Once a password has been set and the power on lock is activated, the projector cannot be used unless the correct password is entered every time the projector is started. 1. Open the OSD menu and go to the SYSTEM SETUP
  • BenQ mp777 | User Manual - Page 27
    procedure 1. Press and hold AUTO on the projector or remote control for 3 seconds. The projector RECALL PASSWORD will display a coded number on the screen. 2. Write down the number and turn off your projector. 3. Seek help from the local BenQ service Please write down the recall code, and
  • BenQ mp777 | User Manual - Page 28
    function To disable password protection, go back to the SYSTEM SETUP: Advanced > Security Settings > Power On Lock menu after Or you will need to manually correct it following ONE of these steps. • Using the remote control Press / on the projector or remote control to display the Keystone correction
  • BenQ mp777 | User Manual - Page 29
    menu is On (which is the default of this projector) if you want the projector to automatically search for the signals. You can also manually cycle through the available input signals. 1. Press SOURCE on the projector or remote control. A source selection bar displays. 2. Press / until your desired
  • BenQ mp777 | User Manual - Page 30
    to a desired size. 4. To navigate the picture, press MODE/ENTER to switch to the panning mode and press the directional arrows ( , , , ) on the projector or remote control to navigate the picture. 5. To reduce size of the picture, press MODE/ENTER to switch back to the zoom in/out function, and
  • BenQ mp777 | User Manual - Page 31
    can be displayed on those unused black areas. 1. Auto: Scales an image proportionally to fit 3. 4:3: Scales an image so that it is the projector's native resolution in its displayed in the center of the horizontal or vertical width. This is suitable screen with a 4:3 aspect ratio. This for
  • BenQ mp777 | User Manual - Page 32
    can follow one of the following steps. • Press MODE/ENTER on the projector or remote control repeatedly until your desired mode is selected. • Go to the PICTURE > . See "Setting the User 1/User 2 mode" on page 32 for details. Setting the User 1/User 2 mode There are two user-definable modes if the
  • BenQ mp777 | User Manual - Page 33
    to the detected signal type, there are some user-definable functions available when User 1 or User 2 is selected. Based on your needs, you can make adjustments to these functions by highlighting them and pressing / on the projector or remote control. Adjusting Brightness The higher the value, the
  • BenQ mp777 | User Manual - Page 34
    a test disc which contains various color test patterns and can be used to test the color presentation on monitors, TVs, projectors, etc and highlight 3D Color Management. 2. Press MODE/ENTER on the projector or remote control and the 3D Color Management page displays. 3. Highlight Primary Color and
  • BenQ mp777 | User Manual - Page 35
    better time management when giving presentations. Follow these steps to utilize this function: 1. Press Timer Set up on the remote control or go to the SYSTEM SETUP: Basic > Presentation Timer menu and press MODE/ENTER to display the Presentation Timer page. 2. Highlight Timer Period and decide
  • BenQ mp777 | User Manual - Page 36
    Yes and press MODE/ENTER on the projector or remote control to confirm. You will see the message control Press Timer On and press / to highlight Off and press MODE/ENTER. • Using the OSD menu 1. Go to the SYSTEM SETUP or not by following the on-screen instruction. • If the timer is already on
  • BenQ mp777 | User Manual - Page 37
    the blank time in the SYSTEM SETUP: Basic > Blank Timer menu to let the projector return the image automatically after a problems regarding image quality, installation, special feature operation and service information. To get the FAQ information: 1. Press / on the projector or remote control
  • BenQ mp777 | User Manual - Page 38
    . To release panel key lock, press and hold / on the remote control or projector for 3 seconds. You can also use the remote control to enter the SYSTEM SETUP: Basic > Panel Key Lock menu and press / to select Off. • Keys on the remote control are still active when panel key lock is enabled. • If you
  • BenQ mp777 | User Manual - Page 39
    SETUP: Advanced menu is highlighted. 2. Press to highlight Audio Settings and press MODE/ENTER. The Audio Settings page displays. 3. Highlight Mute and press / to select On. Adjusting the sound level To adjust the sound level, press Volume +/- on the remote control the projector menu display
  • BenQ mp777 | User Manual - Page 40
    end to the RJ45 LAN input jack of the projector and the other end to the RJ45 port. 2. Press MENU/EXIT and then press / until the SYSTEM SETUP: Advanced menu is highlighted. 3. Press to highlight Lan Control Settings and press MODE/ENTER. The Lan Control Settings page displays. 4. Press to highlight
  • BenQ mp777 | User Manual - Page 41
    . This page allows you to operate the projector as if you were using the remote control or control panel on the projector. i ii i i i. These buttons function the same as the ones on the OSD menus or remote control. See "2. PICTURE menu" on page 47 and "Remote control" on page 11 for details. The
  • BenQ mp777 | User Manual - Page 42
    track of its location and the person in charge of it. ii. You can adjust the Lan Control Settings. iii. Once set, access to the remote network operation on this projector has been password-protected. iv. Once set, access to the tools page has been password-protected. After making the adjustments
  • BenQ mp777 | User Manual - Page 43
    shuts down, and the fans will continue to run for approximately 90 seconds to cool down the projector. To protect the lamp, the projector will not respond to any commands during the cooling process. To shorten the cooling time, you can also activate the Quick cooling function. See "Quick
  • BenQ mp777 | User Manual - Page 44
    menus vary according to the signal type selected and the projector model you are using. Main menu Sub-menu Options Dynamic/Presentation/sRGB/Cinema/User 1/User 2 Reference Mode Dynamic/ RGB/YUV Timer Period 1~240 minutes 4. SYSTEM SETUP: Basic Presentation Timer Timer Display Always/1 min
  • BenQ mp777 | User Manual - Page 45
    SYSTEM SETUP: Basic 5. SYSTEM SETUP: Advanced Projector Position hr/4 hr/8 hr/12 hr Splash Screen Black/Blue/BenQ Quick Cooling On/Off High Altitude Mode On/Off Mute On Out On/Off Lamp Mode Normal/Economic Lamp Settings Reset lamp timer Equivalent Lamp Hour Security Change
  • BenQ mp777 | User Manual - Page 46
    5. SYSTEM SETUP: Advanced Closed Caption Closed Caption Enable Caption Version Control By DHCP Projector IP Lan Control Address Settings Subnet Mask Default Gateway DNS Server Apply Reset All Settings FAQ-Image and Installation FAQ-Features and Service 6. INFORMATION Current
  • BenQ mp777 | User Manual - Page 47
    for details. Pre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. See "Selecting a picture mode on the selections listed on the same page below. See "Setting the User 1/User 2 mode" on page 32 for details. Adjusts the brightness of the
  • BenQ mp777 | User Manual - Page 48
    See "3D Color Management" on page 34 for details. Save Settings Saves the settings made for User 1 or User 2 mode. Quick Auto Search (On) See "Switching input signal" on page 29 for details. See "Using the menus" on page 25 for details. 3. SOURCE menu 4. SYSTEM SETUP: Basic menu 48 Operation
  • BenQ mp777 | User Manual - Page 49
    on the remote control. See "Locking control keys" on page 38 for details. Sleep Timer Sets the auto-shutdown timer. The timer can be set to a value between 30 (Disable) minutes and 12 hours. Splash Screen (BenQ logo) Allows you to select which logo screen will display during projector start-up
  • BenQ mp777 | User Manual - Page 50
    using a suitable RS-232 cable and update or download the projector's firmware. This function is intended for qualified service personnel. Selecting On enables the function and the projector displays the grid test pattern. It helps you adjust the image size and focus and check that the projected
  • BenQ mp777 | User Manual - Page 51
    , Phase, H. Size, User 1, User 2, Color Space Conversion, Language, Projector Position, High Altitude Mode, Security Settings and Baud Rate. 6. INFORMATION menu FAQ-Image and Installation FAQ- Displays possible solutions to problems you may encounter. Features and Service Source Shows the
  • BenQ mp777 | User Manual - Page 52
    the instructions below: • Make sure the temperature and humidity of the storage area are within the recommended range for the projector. Please refer to "Specifications" on page 60 or consult your dealer about the range. • Retract the adjuster feet. • Remove the batteries from the remote control
  • BenQ mp777 | User Manual - Page 53
    light output will be reduced and result in darker projected pictures. Setting the projector in Economic mode also extends the lamp operation life. To set Economic mode, go into the SYSTEM SETUP: Advanced > Lamp Settings > Lamp Mode menu and press / . • Setting Auto Power Off This function allows the
  • BenQ mp777 | User Manual - Page 54
    . The lamp MUST be replaced before the projector will operate normally. Notice Replace Lamp Now Lamp > 3000 Hours Lamp usage time exceeded Order a new lamp at lamp.benq.com OK Notice Out of Lamp Usage Time Replace lamp (refer to User manual) Then reset lamp timer Order a new lamp at lamp.benq.com
  • BenQ mp777 | User Manual - Page 55
    hazardous waste regulations to dispose of this lamp in a proper manner. • To assure optimal performance from the projector, it is recommended that you purchase a qualified projector lamp for lamp replacement. • If lamp replacement is performed while the projector is suspended upside-down from the
  • BenQ mp777 | User Manual - Page 56
    the lamp. • Loose screw may cause a bad connection, which could result in malfunction. • Do not over tighten the screw. 10. Ensure the handle is fully laid flat and locked in place. 11. Replace the new protection film that comes with the new lamp. 12. Replace the lamp cover on the projector. 56
  • BenQ mp777 | User Manual - Page 57
    a bad connection, which could result in malfunction. • Do not over tighten the screw. 14. Connect the power and restart the projector. Do not turn the power on with the lamp cover removed. Resetting the lamp timer 15. After the startup logo, open the On-Screen Display (OSD) menu. Go to the SYSTEM
  • BenQ mp777 | User Manual - Page 58
    needs to cool for 90 seconds after the power is turned off. • The projector has shutdown automatically. If you try to re- start the projector, it will shutdown again. Please contact your dealer for assistance. Lamp events The projector has shutdown automatically. If you try to re-start Red the
  • BenQ mp777 | User Manual - Page 59
    or remote control. Open the lens cover. Remedy Adjust the focus of the lens using the focus ring. Adjust the projection angle and direction as well as the height of the projector if necessary. Open the lens cover. Remedy Replace the batteries with new ones. Remove the obstacle. Stand within
  • BenQ mp777 | User Manual - Page 60
    Specifications Projector specifications All specifications are subject to change without notice. Optical Input terminals Resolution 1024 x 768 XGA Display system 1-CHIP DMD Lens F/Number F = 2.59-2.92 Lamp 280 W lamp Electrical Computer input RGB input D-Sub 15-pin (female) x 2 Video signal
  • BenQ mp777 | User Manual - Page 61
    Dimensions 290 mm (W) x 94 mm (H) x 252 mm (D) 290 252 94 Ceiling mount installation Ceiling mount screw: M4 x 8 (Max. L = 8 mm) 61.99 71.15 242.04 149.50 84.00 Unit: mm 228.00 86.73 452.65 397.40 364.40 84.00 145.50 289.98 132.31 251.83 Specifications 61
  • BenQ mp777 | User Manual - Page 62
    Timing chart Supported timing for PC input Resolution Mode Vertical Horizontal Frequency (Hz) Frequency (kHz) 720 x 400 720 x 400_70 VGA_60 640 x 480 VGA_72 VGA_75 VGA_85 SVGA_60 800 .000 136.750 162.000 30.240 57.280 80.000 100.000 46.996 51.419 52.5 73.25 83 115.5 62 Specifications
  • BenQ mp777 | User Manual - Page 63
    Supported timing for HDMI (HDCP) input - MP776 Resolution Mode Vertical Horizontal Frequency (Hz) Frequency (kHz) Pixel Frequency (MHz) 720 x 400 720 x .000 56.260 148.500 Displaying a 1080i(1125i)@60Hz or 1080i(1125i)@50Hz signal may result in slight image vibration. Specifications 63
  • BenQ mp777 | User Manual - Page 64
    .00 50.00 Displaying a 1080i(1125i)@60Hz or 1080i(1125i)@50Hz signal may result in slight image vibration. Supported timing for Video and S-Video inputs Video mode NTSC PAL SECAM PAL-M PAL-N PAL-60 NTSC4.43 Horizontal Frequency (MHz) 3.58 4.43 4.25 or 4.41 3.58 3.58 4.43 4.43 64 Specifications
  • BenQ mp777 | User Manual - Page 65
    replacement of any defective parts (labor included). To obtain warranty service, immediately notify the dealer from which you purchased the product of any defects. Important: The above warranty shall be void if the customer fails to operate the product in accordance with BenQ's written instructions
  • BenQ mp777 | User Manual - Page 66
    and used in accordance with the instructions, may cause harmful interference to turning the equipment off and on, the user is encouraged to try to correct the . EEC statement This machine was tested against the 89/336/EEC ( or your household waste disposal service. The recycling of materials will
  • BenQ mp777 | User Manual - Page 67
    controls on the products. • BenQ's monitors and projectors include user-selectable color controls, such as color temperature selections (Monitor: 5800K, 6500K and 9300K, Projector assist the hearing impaired. • All BenQ monitors and projectors come with user manuals on compact discs which could be
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
Welcome
MP776/MP777
MP776/MP777
MP776/MP777
MP776/MP777
Digital Projector
Digital Projector
Digital Projector
Digital Projector
User Manual
User Manual
User Manual
User Manual