Beretta 687 Silver Pigeon V Beretta Over & Under User Manual

Beretta 687 Silver Pigeon V Manual

Get Beretta 687 Silver Pigeon V PDF manuals and user guides View all Beretta 687 Silver Pigeon V manuals
Add to My Manuals
Save this manual to your list of manuals

Beretta 687 Silver Pigeon V manual content summary:

  • Beretta 687 Silver Pigeon V | Beretta Over & Under User Manual - Page 1
    SOVRAPPOSTI - PARALLELI OVER AND UNDERS - SIDE BY SIDES SUPERPOSES - JUXTAPOSES Manuale di Istruzione Instruction Manual Mode d'Emploi
  • Beretta 687 Silver Pigeon V | Beretta Over & Under User Manual - Page 2
    ALL OF THIS MANUAL PRIOR TO USE OR ACCESS. WE RECOMMEND THE USE OF ORIGINAL BERETTA SPARE PARTS AND ACCESSORIES. THE USE OF OTHER MANUFACTURER'S THE BERETTA WARRANTY. WARNING: IT IS YOUR RESPONSIBILITY TO KNOW AND ABIDE BY FEDERAL, STATE AND LOCAL LAWS GOVERNING THE SALE, TRANSPORTATION AND USE
  • Beretta 687 Silver Pigeon V | Beretta Over & Under User Manual - Page 3
    SAFETY RULES 32 NOMENCLATURE 36 SAFETY 37 ASSEMBLY 38 AMMUNITION 39 LOADING AND FIRING 40 UNLOADING THE SHOTGUN 42 DECOCKING THE HAMMERS 42 DISASSEMBLY 43 BERETTA MOBILCHOKE® AND OPTIMACHOKE® TUBES 44 ADJUSTMENT OF LENGTH OF PULL AND REPLACEMENT OF TRIGGER 46 INTERCHANGEABLE
  • Beretta 687 Silver Pigeon V | Beretta Over & Under User Manual - Page 4
    examine the inside to see if a round is present. Removing or unloading the magazine will not guarantee that a firearm is unloaded or cannot fire. Shotguns and rifles can be checked by cycling or removing all rounds and by then opening and inspecting the chamber so that a visual inspection of the
  • Beretta 687 Silver Pigeon V | Beretta Over & Under User Manual - Page 5
    handling, but accidents can best be prevented by following the safe handling procedures described in these safety rules and elsewhere in the product manual. To further familiarize yourself with the proper use of this or other firearms, take a Firearms Safety Course taught by an expert in firearms
  • Beretta 687 Silver Pigeon V | Beretta Over & Under User Manual - Page 6
    parts. Clean and oil your firearm, following the instructions provided in this manual, after each use to prevent corrosion, damage to the barrel or accumulation of impurities which can prevent use of the gun in an emergency. Always check the bore and chamber(s) prior to loading to ensure that they
  • Beretta 687 Silver Pigeon V | Beretta Over & Under User Manual - Page 7
    open before handing it to another person. Never take a firearm from another person unless it is unloaded, visually and physically checked to confirm it is unloaded, and the action is open. 10.AVOID ALCOHOLIC BEVERAGES OR JUDGMENT / REFLEX IMPAIRING MEDICATION WHEN SHOOTING. Do not drink and shoot.
  • Beretta 687 Silver Pigeon V | Beretta Over & Under User Manual - Page 8
    NOMENCLATURE NM L I B D N M N B D F G A E H F G AH E P S R Q O C T P S R Q O C T A Action/Receiver B Barrels C Stock D Fore-end E Trigger/s F Top lever G Safety (with selector on request) H Trigger guard I Rib L Side rib M Front sight N Muzzle O Recoil pad / Butt plate P Line
  • Beretta 687 Silver Pigeon V | Beretta Over & Under User Manual - Page 9
    SAFETY WITHOUT SELECTOR WITH SELECTOR on the first barrel WITH SELECTOR on the second barrel SAFETY ON SAFETY OFF The gun is ready to fire ! 1 3 5 2 4 6 The gun is ready to fire first the cartridge inserted into the bottom barrel (over and unders) or into the right barrel (side-by-sides).
  • Beretta 687 Silver Pigeon V | Beretta Over & Under User Manual - Page 10
    84 and 85. WARNING: Beretta assumes no responsibility for any shotgun. (The areas to lubricate are indicated by the arrows on Fig. 9). Before using this shotgun, make sure that lubricant is present as instructed of the receiver (Fig. 10). Swab the bores with a clean cotton patch held on a cleaning
  • Beretta 687 Silver Pigeon V | Beretta Over & Under User Manual - Page 11
    . 20 WARNING use of reloaded ammunition. Use of reloaded ammunition will void the manufacturer's warranty. Beretta over-and-under and side-by-side shotguns feature 2 3/4" (70 mm) and 3" (76 mm) chambers. Models with 3 1/2" (89 mm) chambers are also available. You will find the markings for the gauge
  • Beretta 687 Silver Pigeon V | Beretta Over & Under User Manual - Page 12
    the cartridge itself to ensure that the correct gauge and length of shell is used for your firearm. STEEL SHOT The use of steel shot cartridges is not recommended in either over and under and side-by-side shotguns with fixed chokes. Beretta "SP" (Steel Proof) Mobilchoke® and Optimachoke® tubes are
  • Beretta 687 Silver Pigeon V | Beretta Over & Under User Manual - Page 13
    gun does not fire on a live cartridge when the trigger is pulled, activate the safety, wait one minute, then open the chamber and manually extract the unfired cartridge. NOTICE: The Manufacturer assumes no responsibility for any injury or property damage resulting from improper or careless handling
  • Beretta 687 Silver Pigeon V | Beretta Over & Under User Manual - Page 14
    will only be extracted (not ejected). Extract them manually. ● Prior to closing the action, inspect the chambers use of snapcaps to avoid damage to the firing pins. Procedure: ● Open the gun and unload it. (See paragraph "Unloading the shotgun"). ● Insert snapcaps into the chambers. Beretta
  • Beretta 687 Silver Pigeon V | Beretta Over & Under User Manual - Page 15
    disassembly. WARNING: Never point a firearm at someone or at hard and flat surfaces. Treat the firearm as if it were loaded. To disassemble Beretta over-and-under and side-by-side shotguns, proceed as follows: OVER AND UNDER Check to ensure the chambers are empty. (See paragraph "Unloading the
  • Beretta 687 Silver Pigeon V | Beretta Over & Under User Manual - Page 16
    both single-barrel and double-barrel shotguns. The grooved or checkered extension on the tube allows for easy removal and replacement by hand. If necessary, you can use also the special extra long tube spanner supplied. Fixed Chokes and Beretta's Mobilchoke® and Optimachoke® Designations Standard
  • Beretta 687 Silver Pigeon V | Beretta Over & Under User Manual - Page 17
    , unload the firearm by operating as described in the chapter "Unloading the shotgun". WARNING: Never look into the muzzle or change tubes on a loaded set into the barrels. If necessary, firmly tighten the chokes, using the Beretta spanner, until they can be tighten no more.This tightening is
  • Beretta 687 Silver Pigeon V | Beretta Over & Under User Manual - Page 18
    . Do not alter or modify existing fixed choke Beretta barrels for the use of interchangeable choke tubes. The resulting wall thickness of the trigger base. (Fig. 29) DT10 TRIDENT The DT10 TRIDENT competition shotgun comes with a wide symmetrical trigger, while a canted trigger corresponding to the
  • Beretta 687 Silver Pigeon V | Beretta Over & Under User Manual - Page 19
    of the trigger base.Remove the trigger by pulling it down. (Fig.31) INTERCHANGEABLE TRIGGER GROUP DT10 TRIDENT The Beretta DT10 Trident competition shotguns feature a completely interchangeable and quickly removable trigger group. WARNING: Removal and/or installation of the trigger group should be
  • Beretta 687 Silver Pigeon V | Beretta Over & Under User Manual - Page 20
    or if it is dislodged by contact with other objects. F) In case the shotgun is closed (without the trigger group inserted) open it slightly by carrying out operations to: - A stock bolt with hexagonal allen head. - A guiding nut, buried inside the stock, designed to facilitate the insertion of
  • Beretta 687 Silver Pigeon V | Beretta Over & Under User Manual - Page 21
    Gel•Tek recoil pad that can be replaced with other Beretta recoil pads of different thickness and material (optional). By 42) ● Insert bushings in their lodgings in the stock insert and securely tighten all screws using a properly sized Phillips-head screwdriver. (Fig. 43) ● Place the pad on the
  • Beretta 687 Silver Pigeon V | Beretta Over & Under User Manual - Page 22
    SYSTEM FOR BERETTA OVER AND and the cast (right or left). The adjustable stock of your shotgun is factory preset with standard measures of drop and cast. ADJUSTING of cast. ● Tighten the locking screws of the adjustment mechanism, always using the supplied wrench (Fig. 39). ● If you want to "memorize
  • Beretta 687 Silver Pigeon V | Beretta Over & Under User Manual - Page 23
    ● Check the adjustment of the cast, by mounting the shotgun. ● To finely adjust the drop, loosen both the central that does not require lubrication. Avoid the use of oils or solvents.Clean the surfaces OF TRUGLO® FRONT SIGHT LUMINOUS INSERT FOR BERETTA OVER AND UNDERS SUPPLIED WITH TRUGLO® FRONT
  • Beretta 687 Silver Pigeon V | Beretta Over & Under User Manual - Page 24
    . For the Upper firing pin repeat the same operations. MAINTENANCE On Beretta shotguns, maintenance has been reduced to a minimum, but that minimum must be performed to ensure safe and reliable functioning and a longer service life for the shotgun. CAUTION: At the end of a day of shooting, clean and
  • Beretta 687 Silver Pigeon V | Beretta Over & Under User Manual - Page 25
    using this shotgun, make sure that lubricant is present as instructed. ● Clean with care the external surfaces of the gun to remove any trace of dirt, sweat and fingerprints. Apply a thin film of Beretta bores - even partially - is very dangerous when firing and may cause damage to the shotgun and
  • Beretta 687 Silver Pigeon V | Beretta Over & Under User Manual - Page 26
    PERIOD The Warranty and extension of the Warranty repair period is packed with your new Beretta firearm. Please refer to the WARRANTY and the instructions given on it in case Warranty service is required. NOTICE: Wholesalers, dealers or gunsmiths (unless they are a Repair Station authorized by the
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
SOVRAPPOSTI - PARALLELI
OVER AND UNDERS - SIDE BY SIDES
SUPERPOSES - JUXTAPOSES
Manuale di Istruzione
Instruction Manual
Mode d’Emploi