Bernina 810 Manual - Page 42
be gathered
View all Bernina 810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
IP Presser foot: Gatherer 179 Needle: 80-70 Mercerised sewing thread: 50 Stitch width: 0 Stitch length: 11/2-4 Automatic: straight stitch ----(0) Needle position: centre Drop feed control: sewing The flat piece of material Is inclined to slip out of the slot. In order to avoid this the work should be guided as shown in the Illustration, by holding the lower piece with the left hand and the upper piece with the right hand. Always pull slightly towards the right hand corner of the presser foot. Calculation: The amount of gather depends on the length of the stitch. The longer the stitch the tighter the gather. For tight gathering the upper piece of material can be pulled a little. The material to be gathered always lies under the foot and the flat piece In the slot. The Gatherer • a . r• - 071•10 • 41