Bernina 810 Manual - Page 7
Electrical, Connection, Bobbin
View all Bernina 810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Electrical Connection Model 817 Connecting to supply Warning! First compare voltage specified on machine with the existing mains voltage. Fit special plug on foot-starter. After inserting the special combination plug for mains and starter connection in the machine, only then connect the mains plug with the socket and start the machine by pressing lightly on the footboard of the starter. Wamingl The special connecting cable may only be used for connecting Bernina sewing machines. Adjustable motor. It is an advantage with many kinds of sewing to be able to reduce the speed of the machine. Push the switch. Now the machine runs with half the number of revolutions and the speed can easily be regulated. Light switch. By pressing switch the dazzle-free light can be switched on and off. Pull out light cover sideways to change the bulb. Press bulb upwards, turn anti-clockwise and draw downwards. To insert bulb, turn It clockwise. (Lamp: 15 Watt.) • l•r"Vip,&&.„ /MU 1 . : 7 tsorid Model 807, 810 Bobbin and Case Removing the bobbin case ii Open hinged bobbin case cover. Turn hand wheel towards you until the needle -mod is in its highest position. or,T7 Open the hinged latch with thumb and forefinger of the left hand and remove the bobbin case. The insertion of the bobbin case is carried out in the same manner. II -4101limpilsor 5