Bernina Artista 640 User Guide - Page 1

IMPORTANT SAFETY INSTRUCTIONS ! When using an electrical appliance, basic safety precautions should always be followed, including the following: Read all instructions before using this sewing computer. When the sewing computer is not in use, it should be disconnected from the electricity supply by removing the plug from the outlet. Safety Instructions 1 DANGER To reduce the risk of electrical shock: 1. An appliance should never be left unattended when plugged in. 2. Always unplug this sewing computer from the electrical outlet immediately after using and before cleaning. WARNING To reduce the risk of burns, fire, electric shock or injury to persons: 1. Do not allow to be used as a toy. Close attention is necessary when this sewing computer is used by or near children and infirm persons. 2. Use this sewing computer only for its intended use as described in this manual. Use only attachments recommended by the manufacturer as contained in this manual. 3. Never operate this sewing computer if: • it has a damaged cord or plug, • it is not working properly • it has been dropped or damaged, • it has fallen into water Return the sewing computer to the nearest authorized BERNINA dealer or service center for examination, repair, electrical or mechanical adjustment. 4. Never operate the sewing computer with any air vents blocked. Keep ventilation openings of the sewing computer and foot controller free from accumulation of lint, dust and fabric remnants and the like. 5. Keep fingers away from all moving parts. Special care is required around the sewing needle. 6. Always use the BERNINA original stitch plate. The wrong plate can cause needle breakage. 7. Do not use bent needles. 8. Do not pull or push fabric while stitching, which may deflect the needle, causing it to break. 9. Turn power switch to «0» (off) when making any adjustments in the needle area, such as threading or changing the needle, threading the bobbin or changing the presser foot etc. 10. Always unplug the sewing computer from the electrical outlet when removing covers, lubricating or when making any other user servicing adjustments mentioned in this instruction manual. 11. Never drop or insert any object into any openings on the sewing computer. 12. Do not use the sewing computer outdoors. 13. Do not operate where aerosol (spray) products are being used or where oxygen is being administered. 14. To disconnect, turn all controls to the off («0») position then remove the plug from the outlet. 15. Do not unplug by pulling on the cord, instead, grasp the plug before pulling. 16. No responsibility will be taken on behalf of BERNINA for any possible damage as the result of misuse of the sewing computer. 17. Under no circumstances should the sewing computer be left unattended when using the embroidery module. 18. This sewing computer is provided with double insulation (except USA / Canada). Use only identical replacement parts. See instructions for servicing of doubleinsulated machines. SERVICING DOUBLEINSULATED PRODUCTS In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding means is provided on a doubleinsulated product nor should a means for grounding be added to the product. Servicing a double-insulated product requires extreme care and knowledge of the system and should only be done by qualified service personnel. Replacement parts for a double-insulated product must be identical to those parts in the product. A double insulated product is marked with the words «DOUBLE INSULATION» or «DOUBLE INSULATED». The symbol product. may also be marked on the This sewing and embroidery computer is intended for household use only. SAVE THESE INSTRUCTIONS!