Bernina Artista 640 User Guide - Page 122
Starting to Embroider With the Start
View all Bernina Artista 640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
122 Starting to Embroider Starting to Embroider With the StartStop-Button on Head Frame • lower the presser foot • keep the Start-Stop-button on the head frame depressed until the embriodery computer starts • the embroidery computer will sew approximately 7 stitches and stop automatically • a screen indicates that the thread tail has to be cut at the beginning of the motif • raise the presser foot • cut the thread tail at the beginning of the motif • lower the presser foot • press the Start-Stop-button on head frame to resume embroidering Interrupting With the Foot Control • when the embroidery computer is embroidering, press the Start-Stop-button on head frame or tap the foot control lightly • the embroidery computer will stop immediately Completing the Color • lower the presser foot again • press the Start-Stop-button on head frame or the foot control again • the embroidery computer embroiders all the sections in the color activated • the embroidery computer stops automatically when complete • both threads will automatically be cut Starting to Embroider With Foot Control • lower the presser foot • press the foot control • the embroidery computer will stop automatically after approx. 7 stitches • a screen indicates that the thread tail has to be cut at the beginning of the motif • release the foot control • raise the presser foot • cut the thread tail at the beginning of motif • lower the presser foot • when embroidering with the foot control always keep it depressed Changing Color • the embroidery computer is automatically ready to embroider the next color • change color of the upper thread accordingly • embroider with the new color Cutting Thread Ends After Embroidery • raise the presser foot • remove the embroidery hoop from the embroidery arm • cut threads close to the motif • carefully remove any connecting threads from the embroidered area • take care that the bobbin thread is not cut too closely to the stitch plate when removing the embroidery hoop Embroidery Screen • after starting to embroider the Embroidery screen appears