Bernina Artista 640 User Guide - Page 152
Attach Embroidery foot No. 26.
View all Bernina Artista 640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
152 Messages Service Notification Set feed dog on «Sewing» Deleting or overwriting data , e.g. Drawers. The sewing computer must be taken for a service to a BERNINA dealer. The notification will appear after approx. 2,000,000 stitches. If the service was done by the BERNINA dealer, the stitch counter will be on «0» again and the display does not appear anymore. The display can be cleared temporarily by touching «ESC», but will appear again when restarting the sewing computer. After clearing with «ESC» for the third time, the notification will appear again at approx. 4,000,000 stitches. Press the button «Drop feed dog». The message disappears automatically if the feed dog position was changed. Confirm with «OK» or cancel with «ESC». Change the needle to the highest position. Turn the hand wheel and put the needle in the highest position. Remove embroidery hoop. Attach embroidery hoop. Attach Embroidery foot No. 26. Thread bobbin case Design ist not completely inside the hoop. Remove embroidery hoop from embroidery module. Attach embroidery hoop to embroidery module. Attach Embroidery foot No. 26 to the embroidery computer. For embroidery thread the lower thread in the finger of the bobbin case Position the design inside the hoop.