Bernina Bernette 715 Manual - Page 26
Model, narnal, Insert
View all Bernina Bernette 715 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
0 0 0 0 00 000• 0 0 0 tilt: 45 1:41101 Co 2 2127 2120 71 Mil nrw inn 1 44 0 00 0 0 0 M0 0 UM 1 V Three needle positions (Model 741E only) Turn thestitch selection dial to straight stitch. (1) The needle position can be altered with the lever A. For normal work, the needle position is Centre. For edge stitchingor sewingparallellines of to stitching, sated needle position Left or Right. Seams in jersey can be sewn and neatened inoneoperation.Attractive effects can be obtained in woven fabrics, depending on the type of stitch. Always sew on the right side of the fabric with a Twin needle. B Needle position: C narnal work) C Needle position: L (edge stitching, etc.) D Needle position: R (top stitching, etc.) Attention: Use needle position -Centre" only.Thestitch width should not be more than 3. For safety's sake, turn the handwheel to check that the needle does not go Into the stitch plate. Sewing with a Thin needle (Model 740E only) For visible seams in jerseys, decorative work, pintucks. (2) Attention: Turn power switch to "01 Insert the Twin needle, thread both threads, see Illustration Page 30, thread needle eyes separately.