Bernina Bernette 715 Manual - Page 46
adjuststtch
View all Bernina Bernette 715 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
O 2413222120 4 ;ii!h ° 110 ° 1 tl If 6 T4 131211 ,-10-• HMO 1 Sewing on buttons Imoce 140E ont, Set the machine as illustrated.Lower the teed dog. Needle position right (1) Position the work under the foot. Place the button on the marked position. 'ower the foot. adjuststtch width to 'V and sew a few securing slit• ches. Adjust the stitch width (noimal. ly between 3 and 4). Turn the hand • wheel to check that the needle goes cleanly into the lett hole of the button (adjust the stitch width according to the button). and sew on the button. Adjust the stitch width to and sew a few securing stitches. (2) If a shank is required. place adarning needle on top of the button and sew. (3) For buttons with d holes, sew through the front two holes first IFfg. 2). push work forward and then sew through the back two holes as described. (3) 2 3 84