Binatone BARK 200U User Guide

Binatone BARK 200U Manual

Binatone BARK 200U manual content summary:

  • Binatone BARK 200U | User Guide - Page 1
    User's Guide SHOCK-FREE NO-BARK COLLAR WITH DUAL SONIC TECHNOLOGY Model: BARK200U The features described in this User's Guide are subject to modifications without prior notice.
  • Binatone BARK 200U | User Guide - Page 2
    all the information you need to get the most from the product. Please read and follow the instructions in this User's Guide along with the Safety Instructions on page 6 before you using this product. Got everything? • 1 x No-Bark Collar Unit (with CR2450 battery installed) • 1 x Nylon Collar Strap
  • Binatone BARK 200U | User Guide - Page 3
    Overview of the No-Bark Collar Unit 1 23 5 4 1. Indicator LED 4. Speakers Lights up in green for 3 seconds Delivers audible tone and ultrasonic when the unit is powered on and sound. flashes slowly during standby. 5. Battery Cover Lights up in red when battery is low. Flashes quickly in
  • Binatone BARK 200U | User Guide - Page 4
    will emit the ultrasonic correction. If your dog is quiet for two minutes, once again it is offered five more seconds of "free" barking followed by a warning vibration prior to any ultrasonic correction. You can choose from three levels of correction (Level 1 - audible tone only, Level 2 - 1 second
  • Binatone BARK 200U | User Guide - Page 5
    ENGLISH Table of contents 1. Safety Instructions 6 2. Getting Started 7 2.1 Attach the Adjustable Strap to the No-Bark Collar Unit 7 2.2 Insert and Remove Battery on the No-Bark Collar Unit 7 2.3 Fit the No-Bark Collar Unit on your Dog's Neck 9 2.4 Trim Away Excess Strap Length 10 3. Using
  • Binatone BARK 200U | User Guide - Page 6
    is suitable for use on healthy, non-aggressive dogs to control excessive barking when used as described in this User's Guide. Therefore, always read the instructions in this User's Guide carefully before using the product. • DO NOT USE ON AGGRESSIVE DOGS - This product is not for use on aggressive
  • Binatone BARK 200U | User Guide - Page 7
    Slot 3. Slot 2 Slot 3 Slot 1 3. Continue to thread through Slot 3. 2.2 Insert and Remove Battery on the No-Bark Collar Unit The No-Bark Collar Unit uses a replaceable battery (CR2450). Unlock 1. Turn the battery compartment cover to the unlock position as shown above to release and remove the
  • Binatone BARK 200U | User Guide - Page 8
    it to the lock position as shown below to lock it. Lock Battery Life The average battery life is up to 3 months, depending on how often your dog barks. The Indicator LED lights up in red when battery is low. To conserve battery life, press and hold the POWER KEY to power off the No
  • Binatone BARK 200U | User Guide - Page 9
    to power it off. 2. Have your dog stand in a balanced position on a flat, even surface. 3. Put the strap over your dog's neck, centering the No-Bark Collar Unit underneath its neck and making sure that the Motorola logo is upright facing you. 4. String the end of the strap through the strap
  • Binatone BARK 200U | User Guide - Page 10
    neck. If necessary, trim some of your dog's hair where the No-Bark Collar Unit makes contact with the skin to allow for consistent performance. 2.4 Trim Away Excess Strap Length After you are satisfied with the fit of the No-Bark Collar Unit, you may want to trim away some of the excess nylon strap.
  • Binatone BARK 200U | User Guide - Page 11
    for 3 seconds. The Indicator LED flashes quickly in green and red when releasing ultrasonic sound. 1. Press and hold the ULTRASONIC KEY on the No-Bark Collar Unit for 3 seconds. 2. Short press the ULTRASONIC KEY to adjust the level of correction (from 1 to 3 in cyclic order). The Indicator LED
  • Binatone BARK 200U | User Guide - Page 12
    Free" Bark Duration All dogs bark, so to be most fair to your dog, we have added 5 seconds of "free" barking time, after which a vibration will trigger. Should your dog continue to bark, the No-Bark Collar Unit will release ultrasonic sound at the level that you have selected. 12 Using the No-Bark
  • Binatone BARK 200U | User Guide - Page 13
    first few times. IMPORTANT Reward your dog with treats, play and praise when it is not barking. Many dogs will bark while playing with people or other dogs. Power off and remove the No-Bark Collar Unit before playing with your dog to avoid the unit from releasing ultrasonic correction. When Using
  • Binatone BARK 200U | User Guide - Page 14
    the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. Some of the product materials can be reused if the collection points in your area. Dispose of the battery pack in an environmentally-friendly manner according to your local regulations
  • Binatone BARK 200U | User Guide - Page 15
    . • Check your dog's neck area for irritation and wash neck weekly. • Every effort has been made to ensure high standards of reliability of your No-Bark Collar. However, if something does go wrong, please do not try to repair it yourself - contact Customer
  • Binatone BARK 200U | User Guide - Page 16
    dogs whose needs are well fulfilled and bark excessively at everything that moves. • The No-Bark Collar may not work on dogs that have hearing problems or are suffering from hearing loss. Will the barking from another dog trigger the sensor on the No-Bark Collar? • No. The sensor will trigger only
  • Binatone BARK 200U | User Guide - Page 17
    seem to respond to the ultrasonic correction). • Tighten the No-Bark Collar Unit and/or trim your dog's hair where the (see "Adjust Correction Level" page 11). • Replace the battery. • If your dog still does not respond, contact Customer Service at 1-888-331-3383. Frequently Asked Questions 17
  • Binatone BARK 200U | User Guide - Page 18
    the battery has drained out. • If you are certain that your dog gets the ultrasonic correction, however is still not responding, try the next level higher (see "Adjust Correction Level" page 11). • If your dog still does not respond, contact Customer Service at 1-888-331-3383. 18 Troubleshooting
  • Binatone BARK 200U | User Guide - Page 19
    ENGLISH 9. General Information lf your product is not working properly.... 1. Read this User's Guide. 2. Contact Customer Service: US and Canada 1-888-331-3383 Email: [email protected] Consumer Products and Accessories Limited Warranty Thank you for purchasing this Motorola branded
  • Binatone BARK 200U | User Guide - Page 20
    What Other Limitations Are There? ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED
  • Binatone BARK 200U | User Guide - Page 21
    are excluded from coverage. Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by excluded from coverage. Unauthorised Service or Modification. Defects or damages resulting from service, testing, adjustment, installation
  • Binatone BARK 200U | User Guide - Page 22
    Service or Other Information? To obtain service or information, please call: US and Canada 1-888-331-3383 Email: [email protected] You will receive instructions number of the Product; (d) a written description of the problem; and, most importantly; (e) your address and telephone number.
  • Binatone BARK 200U | User Guide - Page 23
    installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • Binatone BARK 200U | User Guide - Page 24
    Technical Specifications Power CR2450 Lithium Battery 3.0V Water resistance IP54 24 General Information
  • Binatone BARK 200U | User Guide - Page 25
    Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo, are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25

User’s Guide
SHOCK-FREE NO-BARK COLLAR
WITH DUAL SONIC TECHNOLOGY
Model: BARK200U
The features described in this User's Guide are subject to modifications without prior notice.