Binatone Concept Combo 3505 User Manual

Binatone Concept Combo 3505 Manual

Get Binatone Concept Combo 3505 PDF manuals and user guides View all Binatone Concept Combo 3505 manuals
Add to My Manuals
Save this manual to your list of manuals

Binatone Concept Combo 3505 manual content summary:

  • Binatone Concept Combo 3505 | User Manual - Page 1
    USER GUIDE Concept Combo 3525 Twin Concept Combo 3525 Triple Binatone Helpline (for UK only) TELEPHONE CALLS WHEN THE POWER FAILS, BUT IF THERE IS A POWER FAILURE, YOU CAN STILL USE THE BASE AND THE CORDED HANDSET TO MAKE AN EMERGENCY CALL. Before operating this set, please read these instructions
  • Binatone Concept Combo 3505 | User Manual - Page 2
    Standby: 100 hours, Talking: 10 hours Battery charge time:15 hours Temperature range Operating 0 C to 40 C, Storage -20 C to 60 C Electrical power is a SELV port with respect to EN41003. The port (connected to the telephone line) is a TNV port with respect to EN41003. CLEANING AND CARE Do
  • Binatone Concept Combo 3505 | User Manual - Page 3
    TABLE OF CONTENTS 1 IMPORTANT SAFETY INSTRUCTIONS 6 2 INSTALLING YOUR PHONE 8 2.1 CONNECTING THE CORDED BASE STATION 8 2.2 INSTALLING THE CORDLESS HANDSET AND CHARGING THE BATTERIES........ 9 3 GETTING TO KNOW YOUR PHONE 10 3.1 OVERVIEW OF THE
  • Binatone Concept Combo 3505 | User Manual - Page 4
    4.9 REDIAL THE LAST NUMBER 23 4.9.1 REDIAL A NUMBER FROM THE REDIAL LIST 23 4.9.2 STORE A REDIAL NUMBER INTO THE PHONEBOOK 23 4.9.3 DELETE A REDIAL NUMBER 23 4.9.4 DELETE ALL REDIAL LIST ENTRIES 23 Using the corded base: 4.10 MAKE AN EXTERNAL CALL 24 4.10.1 PREPARATORY DIALLING 24 4.10.2
  • Binatone Concept Combo 3505 | User Manual - Page 5
    Using the corded base: 5.8 ADD A NEW ENTRY 32 5.9 EDIT AN ENTRY 32 5.10 VIEW AN ENTRY 32 5.11 DELETE AN ENTRY 33 5.12 DELETE ALL PHONEBOOK ENTRIES 33 5.13 VIEW PHONEBOOK CAPACITY 33 6 CALLER DISPLAY (NETWORK DEPENDENT 34 Using a cordless handset: 6.1 VIEW THE CALL LIST 34 6.2 STORE A CALL
  • Binatone Concept Combo 3505 | User Manual - Page 6
    7.4 BASE SETTINGS 41 7.4.1 DE-REGISTER A HANDSET 41 7.4.2 CHANGE THE DIAL MODE 41 7.4.3 CHANGE THE FLASH (RECALL) TIME 41 7.4.4 CHANGE THE SYSTEM PIN CODE 42 7.4.5 RESET YOUR PHONE 42 Using the corded base: 7.5 SET DATE AND TIME 43 7.6 DE-REGISTER A HANDSET 43 7.7 RINGER SETUP 44 7.7.1
  • Binatone Concept Combo 3505 | User Manual - Page 7
    .5 CHANGE THE COMPRESSION RATE 62 REMOTE CARD 62 9.12.6 CHANGE THE 4-DIGIT REMOTE ACCESS PIN 63 9.12.7 RESET THE TAM TO DEFAULT SETTINGS 63 10 TROUBLESHOOTING 64 11 DECLARATION OF CONFORMITY 65 12 PRODUCT GUARANTEE 66 5
  • Binatone Concept Combo 3505 | User Manual - Page 8
    INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1) Read and understand all the instructions. 2) Follow all warnings and instructions and refer servicing to our Repair
  • Binatone Concept Combo 3505 | User Manual - Page 9
    for the base station • 1 Telephone line cord • 2 AAA rechargeable Batteries • 1 User manual NOTE: If you have a Twin, Triple or Quad system, you normal standards for a DECT phone: maximum range up to 300 metres outdoors or 50 metres indoors. The signal range may decrease if there is any large metal
  • Binatone Concept Combo 3505 | User Manual - Page 10
    ) connection, you will need to insert a micro-filter between the telephone and the telephone line, otherwise you may get interference between the telephone and the broadband, which could cause problems. In a home with broadband, every telephone must have a micro-filter connected, not just the one at
  • Binatone Concept Combo 3505 | User Manual - Page 11
    2.2 Installing the cordless handset and charging the batteries 1) Slide open the battery compartment cover from the back of the handset. 2) Place the 2 supplied batteries into the battery compartment with the polarity markings as indicated. 3) Slide the battery compartment cover back until it clicks
  • Binatone Concept Combo 3505 | User Manual - Page 12
    3 GETTING TO KNOW YOUR PHONE 3.1 Overview of the Handset 1 LEFT SOFT KEY ( ) In idle mode: Press to access the main menu In sub-menu mode: Press to confirm the selection During a call: Press to access Intercom/ Phonebook/ RedialList/ Call List 2 TALK ( ) In idle / predialling mode: Press to make
  • Binatone Concept Combo 3505 | User Manual - Page 13
    6 RIGHT SOFT KEY(CLEAR/BACK/MUTE/INTERCOM) ( ) In main menu mode: Press to go back to idle screen In sub-menu mode: Press to go back to previous level In sub-menu mode: Press and hold to go back to idle screen In editing / predialling mode: Press to clear a character / digit In editing /
  • Binatone Concept Combo 3505 | User Manual - Page 14
    on the current status of the telephone. Steady when the handset is in range of the base. Flashes when out of range of the base or not registered you have a new Voice Mail message. (This is a Caller Display service and is not usually available from UK network providers.) Indicates when the
  • Binatone Concept Combo 3505 | User Manual - Page 15
    3.3 Cordless Handset Menu Structure In idle mode, pressto go to CALL LIST, the first option in the menu list. Press or to go to other options in the menu list. Press to enter a sub-menu or function. Press to go back to the previous level Refer to the following
  • Binatone Concept Combo 3505 | User Manual - Page 16
    3.4 Corded Base Station 1 LCD DISPLAY 2 REPEAT/OGM ( ) In Idle mode: 1 Press and hold to record an OGM Press to playback the OGM 2 7 In TAM message playback mode: Press once to repeat the 3 4 current message, or twice to go 5 back to the previous message. 8 9 10 11 3 ANS ON / OFF ( )
  • Binatone Concept Combo 3505 | User Manual - Page 17
    9 TAM ON/OFF Indication On steady when the answering machine is turned on and there are no new messages. Slowly flashes when there is a new message. Quickly flashes when there is an incoming call. 10 CLEAR/MUTE ( ) In main menu mode: Press to go back to idle screen. In sub-menu mode: Press to go
  • Binatone Concept Combo 3505 | User Manual - Page 18
    is switched off. This will display when you are in the phonebook menu. Indicates when you have a new Voice Mail message. (This is a caller display service and is not usually available from UK network providers.) This will display when the same caller has called more than once Indicates the sequence
  • Binatone Concept Combo 3505 | User Manual - Page 19
    3.6 Base Menu Structure In idle mode, press to go to DATE & TIME, the first option in the menu list. Press or to go to other options in the menu list. Press to enter a sub-menu or function. Press to go back to the previous level. Refer to the following for
  • Binatone Concept Combo 3505 | User Manual - Page 20
    3.7 Text and Digit Entry The following tables show you where each letter and punctuation character can be found, by using repeated presses of the alphanumeric keypad. This will be helpful when storing a name in the phonebook and renaming your handset. In editing mode, a cursor is displayed to
  • Binatone Concept Combo 3505 | User Manual - Page 21
    3.7.2 Norwegian Character Set Key Key press 1 2 3 4 5 6 7 8 9 0 Alphanumeric Editing (For phonebook name editing and renaming handset) 1st 2 nd 3rd 4th 5th 6th 7th 8th 9th 10th SP - 1 A ÆB C 2 D EF 3 G HI 4 J KL 5 M NO6 P QR S7 T UV 8 W XY Z9 0 Number Editing (For phone number
  • Binatone Concept Combo 3505 | User Manual - Page 22
    Using the corded base: 3.7.4 Character Table 0 0 1 SP - 1 2 A B C 2 3 DE F 3 4 GH I 4 5 JKL 5 ŁĹĽ 6 MNO 6 7 PQR S 7 8 TUV 8 9 WX Y Z 9 * # * # ? , / , \ - ( ) . & 20
  • Binatone Concept Combo 3505 | User Manual - Page 23
    4 USING YOUR PHONE Using a cordless handset: 4.1 Make a Call 4.1.1 Preparatory Dialling Enter the phone number and press to connect to the line and dial the number. When entering the number, if you make a mistake, press to delete digits. 4.1.2 Direct Dialling Press to connect
  • Binatone Concept Combo 3505 | User Manual - Page 24
    4.3 End a Call During a call press to end the call. OR Put the handset on the base station or charger to end the call. 4.4. Handset Speakerphone During a call, you can press to alternate between hands-free speakerphone and normal handset use. 4.5 Adjust Volume There are 5 levels
  • Binatone Concept Combo 3505 | User Manual - Page 25
    4.9 Redial the last number You can redial any of the 10 last numbers called. If you have stored a name in phonebook to go with the number, the name will be displayed instead. The most recent number will display at the top of the redial list. 4.9.1 Redial a Number from the Redial List 1. In idle mode
  • Binatone Concept Combo 3505 | User Manual - Page 26
    Using the corded base: 4.10 Make an External Call 4.10.1 Preparatory dialling Enter the phone number and lift up the corded handset or press to dial the number. When entering the number, if you make a mistake, press to delete digits. Note: To insert a pause in the dialling
  • Binatone Concept Combo 3505 | User Manual - Page 27
    4.12 End a Call During a call connection, put the corded handset on the base station to end the call. Or press if you have a call in handsfree mode. 4.13 Adjust Earpiece and Handsfree Volume There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for each of the earpiece and speaker
  • Binatone Concept Combo 3505 | User Manual - Page 28
    " 4.16 Redial You can redial any of the last 10 numbers called. If you have stored a name in the phonebook to go with the number, the name will be displayed as well. 4.16.1 Redial a Number from the Redial List 1. In idle mode, press to view the redial list. Note: the redial list can
  • Binatone Concept Combo 3505 | User Manual - Page 29
    4.17 Find the Cordless Handset Using a cordless handset: If you have more than one cordless handset registered to the base, press and select the handset number to call the other handset, or press 9 to call all registered handsets. Note: If there is an incoming call during the intercom
  • Binatone Concept Combo 3505 | User Manual - Page 30
    Using the corded base: 1. In idle mode, press and the registered handset numbers will display, along with a "9". 2. Enter the handset number you want to call, or press "9" to call all handsets. 4.18.2 Call All Handsets Using a cordless handset: 1. In idle mode, press and the
  • Binatone Concept Combo 3505 | User Manual - Page 31
    Using the corded base: During an external call: 1. Press to show all the other registered handset numbers, plus a "9". 2. Enter the number for the handset/base you want to transfer the call to. The external call is put on hold automatically and the called handset/ base rings. 3. Press <
  • Binatone Concept Combo 3505 | User Manual - Page 32
    . 2. Press to select the desired phonebook entry. 3. Press and to select VIEW. 4. Press and to review the name, number and ringtone of the selected phonebook entry. Note: If the number is more than 12 digits, press or
  • Binatone Concept Combo 3505 | User Manual - Page 33
    5.4 Edit a Phonebook Entry In idle: 1. Press and to select PHONEBOOK and then press to access the phonebook. 2. Press to select the desired phonebook entry. 3. Press and to select EDIT. 4. Press to display the current name. 5.
  • Binatone Concept Combo 3505 | User Manual - Page 34
    Using the corded base: 5.8 Add a New Entry In idle: 1. Press then to show PHONEBOOK. 2. Press to show ADD . 3. Press and the display will show the cursor at the beginning of the name position. 4. Key in the name using the digit keys (maximum 12 characters). If
  • Binatone Concept Combo 3505 | User Manual - Page 35
    5.11 Delete an Entry In idle: 1. Press then to show PHONEBOOK. 2. Press and to show DELETE. 3. Press and to select the desired phonebook entry. 4. Press to display "CONFIRM?". 5. Press to confirm the delete, or
  • Binatone Concept Combo 3505 | User Manual - Page 36
    6 CALLER DISPLAY (NETWORK DEPENDENT) This feature is available if you have subscribed to the Caller Display service with your network service provider. Your phone can store up to 20 received calls with date/time information in the base and cordless handset Call Lists. The number will
  • Binatone Concept Combo 3505 | User Manual - Page 37
    6.2 Store a Call List Number into the Phonebook 1. Follow Steps 1 and 2 in Section 6.1. 2. Press to show ADD TO PB. 3. Press and then enter the name. 4. Press and the selected call list number is displayed. 5. Edit the number if necessary. 6. Press and
  • Binatone Concept Combo 3505 | User Manual - Page 38
    6.6 Store a Call Log / List Number into the Phonebook 1. Follow steps 1 and 2 in Section 6.5. 2. Press to show ADD TO PB? 3. Press and the display will show the cursor at the beginning of the name position. 4. Enter the name using the keypad. 5. Press to confirm the name
  • Binatone Concept Combo 3505 | User Manual - Page 39
    subscribe to Caller Display the time and date settings will be automatically updated by the network when you receive an incoming call. The Caller Display service only sends the month and date, not the year, so you may need to set the year. 7.1.1 Change the Date Format 1. Press and
  • Binatone Concept Combo 3505 | User Manual - Page 40
    is reached, the < > and "ALARM ON" will still flash. An alarm tone will be emitted from the earpiece to alert the user the alarm time is reached. Once the user presses any key or presses and holds. to disable the alarm, the display will revert to the call duration. d. During paging
  • Binatone Concept Combo 3505 | User Manual - Page 41
    a key. Low Battery Tone - emitted while you are talking on the phone to alert you that you need to charge the handset batteries. Out of Range Tone - emitted while you are talking on the phone to alert you to move closer to the base unit, before the call is lost. 1. Press
  • Binatone Concept Combo 3505 | User Manual - Page 42
    7.3.5 Set the Handset Language 1. Press and to select HS SETTINGS. 2. Press and to select LANGUAGE. 3. Press and to select the desired language. 4. Press to confirm. 7.3.6 Rename the Handset 1. Press and to
  • Binatone Concept Combo 3505 | User Manual - Page 43
    7.4 Base Settings 7.4.1 De-register a Handset This operation should only be necessary if one of your handsets becomes faulty or lost and needs to be replaced. You will need to enter the 4-digit System PIN (Default PIN is 0000) in order to de-register a handset from the base station. A de-registered
  • Binatone Concept Combo 3505 | User Manual - Page 44
    7.4.4 Change the System PIN Code A 4-digit system PIN code is used for changing the system settings of the base station. It is used to protect your phone against unauthorised use. The default system PIN code is 0000. 1. Press and to select BS SETTINGS. 2. Press and
  • Binatone Concept Combo 3505 | User Manual - Page 45
    Using the corded base: 7.5 Set Date and Time The format for the date is MM-DD, and the time is HH:MM in24-hour format. 1. Press and to select DATE & TIME. 2. Press and to select SET CLOCK. 3. Press and the 4-digit year is displayed with the last two
  • Binatone Concept Combo 3505 | User Manual - Page 46
    7.7 Ringer Setup 7.7.1 Change Ringer Melody There are 10 base ringer melodies to choose from for external calls. 1. Press and to select SETTINGS. 2. Press and to select RING SETUP. 3. Press to select EXT. RING, then press to select MELODY,
  • Binatone Concept Combo 3505 | User Manual - Page 47
    7.9 Set the Recall (Flash) Time You may need to change the recall (flash) time if your phone is connected to a PBX. The recall time options are SHORT (the default value of 100ms), MEDIUM (300ms) or LONG (600ms). In Idle: 1. Press and to select SETTINGS. 2. Press and
  • Binatone Concept Combo 3505 | User Manual - Page 48
    7.13 Base Default You can reset all of your base settings to their default settings. After a reset, all your personal base settings, call list entries, redial list entries, direct memory entries, and answering messages will be deleted, but any phonebook entries will be kept. 1. Press and <
  • Binatone Concept Combo 3505 | User Manual - Page 49
    base at a time. To check whether a handset is registered, make sure mains power to the base unit is switched on and the handset is within range. The handset's display should show its number and the should be steadily on. If the display shows "REGISTER ", you need to register the
  • Binatone Concept Combo 3505 | User Manual - Page 50
    ANSWERING MACHINE (TAM) Your phone includes a telephone answering machine that records unanswered calls when it (see section 9.5.8). As well as recording incoming messages, you can record memos for other users of your phone. If the answering machine memory is full, the Handset will display TAM FULL
  • Binatone Concept Combo 3505 | User Manual - Page 51
    9.2 Listen to the Messages in the Answering Machine When new messages are recorded on the answering machine, the flashes on the handset display until all the new messages are played. After a new message is played it will be saved as an old message automatically unless it is deleted. Old
  • Binatone Concept Combo 3505 | User Manual - Page 52
    messages in the answering machine, "EMPTY " will display and return back to the DELETE ALL menu. 9.4 Record Memo You can record a memo message for another user. When you record a memo, the message counter will increase by one and the message can be played back in the same way as answering machine
  • Binatone Concept Combo 3505 | User Manual - Page 53
    9.5.2 Set the Outgoing Message (OGM) Language. The answering machine announces the outgoing message when it answers a call. There is a pre-set OGM for each of ANS & REC mode or ANSWER ONLY mode, which can only be in English on this model. 1. Press and to select ANS. MACHINE. 2.
  • Binatone Concept Combo 3505 | User Manual - Page 54
    9.5.4.1 Playback the OGM 1. Press and to select ANS. MACHINE. 2. Press and to select TAM SETTINGS. 3. Press and to select OGM SETTINGS. 4. Press and to select ANS & REC or ANSWER ONLY. 5. Press to show PLAYBACK
  • Binatone Concept Combo 3505 | User Manual - Page 55
    9.5.6 Set the Recording Time of Incoming Message You can set the maximum length of the recording time of the incoming messages. 1. Press and to select ANS. MACHINE. 2. Press and to select TAM SETTINGS. 3. Press and to select RECORD TIME. 4.
  • Binatone Concept Combo 3505 | User Manual - Page 56
    9.5.8 Change the Compression Rate Three different compression rates (HIGH, MEDIUM and LOW) are provided for you to select different quality levels of recording incoming message. The lower the compression rate, the higher the recording quality level attained, but the shorter the total recording time
  • Binatone Concept Combo 3505 | User Manual - Page 57
    9.5.9.2 Activate or Deactivate the Remote Access 1. Press and to select ANS. MACHINE. 2. Press and to select TAM SETTINGS. 3. Press and to select REMOTE ACC. 4. Press and to select ON or OFF to turn the remote access on
  • Binatone Concept Combo 3505 | User Manual - Page 58
    Using the corded base: 9.6 Switching the TAM On/Off When the TAM is switched on, the TAM ON/OFF indicator will be turned on, and it will flash if there are new messages recorded. If the TAM is turned off, the TAM ON/OFF indicator will be off unless there are new messages. 9.6.1 Using the Direct Key
  • Binatone Concept Combo 3505 | User Manual - Page 59
    9.7.1.2 Using the Menu 1. Press and to select ANS. MACHINE. 2. Press and to select TAM SETTINGS. 3. Press and to select OGM SETTINGS. 4. Press and to select ANS & REC or ANSWER ONLY. 5. Press to start recording
  • Binatone Concept Combo 3505 | User Manual - Page 60
    9.8 Switch Between OGMs By default, the answer machine is set in ANS & REC mode which allows callers to leave a message. This mode can be changed to ANSWER ONLY which does not allow callers to leave a message. In that case, your callers will be prompted to call back later. When the answering machine
  • Binatone Concept Combo 3505 | User Manual - Page 61
    will have to start to play them before trying to delete them. 9.10 Record a Memo on the TAM You can record a memo message for another user. When you record a memo, it is saved as a new message and can be played back in the same way as answering machine messages. Memo recording
  • Binatone Concept Combo 3505 | User Manual - Page 62
    9.10.2 Using the Menu 1. Press and to select ANS. MACHINE. 2. Press and to select MEMO. 3. Press to start recording the memo, and RECORDING and a timer are shown on the display. 4. Press to end your memo recording and the memo will then
  • Binatone Concept Combo 3505 | User Manual - Page 63
    9.12 TAM Settings 9.12.1 Set the Answer Delay You can set the number of rings before the answering machine answers and starts playing your OGM. You can set the answering machine to answer after two to eight rings or TIME SAVER. When you ring in to access your messages remotely, if your answering
  • Binatone Concept Combo 3505 | User Manual - Page 64
    message is playing, press 3 Key in your remote security code The default code is 0000. For details of how to set a new code, see the User Guide 9.12.6 on page 63. Note: The key can be entered during or after the OGM and the 4-digit PIN should follow without any delays. If
  • Binatone Concept Combo 3505 | User Manual - Page 65
    9.12.6 Change the 4-Digit Remote Access PIN Your phone lets you check your messages, or otherwise operate your answering machine, by calling the answering machine when you are away from home and then dialling a 4-digit remote access PIN from a tone-dialling phone. The 4-digit remote access PIN code
  • Binatone Concept Combo 3505 | User Manual - Page 66
    TROUBLESHOOTING If you have difficulty with your phone, please try the suggestions listed below. Problem No dialling tone when pressing or key When connected to a PBX, no and/or wrong connection after dialling. "OUT OF RANGE the base unit from the telephone line and plug a
  • Binatone Concept Combo 3505 | User Manual - Page 67
    , Declare under our sole responsibility that the following product Type of equipment: Digital corded + cordless telephone Model Name: CC3525 Country of Origin: China Brand: Binatone complies with the essential protection requirements of R&TTE Directive 1999/5/EC on the approximation of the
  • Binatone Concept Combo 3505 | User Manual - Page 68
    handling charge. 12.1 While the unit is under Guarantee 1. Disconnect the base unit from the telephone line and the mains electricity supply. 2. Pack up all parts of your phone system , using phone system to the address given by the Service Department. * This doesnot affect yourstatutory rights. 66
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
Before operating this set,
please read these instructions carefully.
THE CORDLESS HANDSET IS NOT DESIGNED FOR
MAKING EMERGENCY TELEPHONE CALLS WHEN THE
POWER FAILS, BUT IF THERE IS A POWER FAILURE,
YOU CAN STILL USE THE BASE AND THE CORDED
HANDSET TO MAKE AN EMERGENCY CALL.
USER GUIDE
Monday to Friday from 9:00am to 5:00pm
Tel: 0845 345 9677
**Please note that all calls are charged at local rate
Or visit our website:
www.binatonetelecom.com
C
oncept
C
ombo
3525 Twin
C
oncept
C
ombo
3525 T
riple
Binatone Helpline (for UK only)