Binatone Eclipse BT User Manual
Binatone Eclipse BT Manual
 |
View all Binatone Eclipse BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Binatone Eclipse BT manual content summary:
- Binatone Eclipse BT | User Manual - Page 1
USER GUIDE Eclipse Plus Single/Twin/Triple/Quad DECT Telephone with Answering Machine Binatone Helpline (for UK only) Monday to TELEPHONE CALLS WITHOUT MAINS POWER. ALTERNATIVE ARRANGEMENTS SHOULD BE MADE FOR ACCESS TO EMERGENCY SERVICES. Before operating this set, please read these instructions - Binatone Eclipse BT | User Manual - Page 2
range Electrical power Digital Enhanced Cordless Telecommunication (DECT) 1.88 to Dispose of used batteries according to the instructions. Port specification The port (connected to telephone line) is a TNV port with respect to EN41003. CLEANING AND CARE Do not clean any part of your phone - Binatone Eclipse BT | User Manual - Page 3
Table of Contents 1 IMPORTANT SAFETY INSTRUCTIONS 5 2 INSTALLING YOUR PHONE 8 2.1 Connecting the Base Station 8 2.2 Installing and Charging the Rechargeable Batteries in the Main Eclipse Handset 8 2.3 Installing and Charging the Rechargeable Batteries in an Additional Handset 9 2.4 Removing the - Binatone Eclipse BT | User Manual - Page 4
4.1.5 Call from the Phonebook 25 4.2 Answer and End a Call 26 4.3 Handset Speakerphone 26 4.4 Adjust Earpiece Volume 26 4.5 Adjust Speaker Volume 26 4.6 Mute/Unmute the Microphone 27 4.7 Paging 27 4.8 Switching the Handset On/Off 27 4.9 To Lock/Unlock the Keypad 28 4.10 Make an Internal - Binatone Eclipse BT | User Manual - Page 5
7.1.3 Delete a Call Log Entry 43 7.1.4 Delete All Entries in the Call Log 43 7.2 Redial List 44 7.2.1 Access the Redial List 44 7.2.2 Save a Redial Number into the Phonebook 44 7.2.3 Edit a Redial Number 45 7.2.4 Delete a Redial Number 46 7.2.5 Delete All Entries from the Redial List - Binatone Eclipse BT | User Manual - Page 6
75 11.6.3 Delete a Personal Announcement 76 11.7 Remote Access 78 11.7.1 Access the Answering Machine Remotely 78 12 TROUBLESHOOTING 82 13 DECLARATION OF CONFORMITY 86 14 GUARANTEE AND SERVICE 87 14.1 While the unit is under Guarantee 87 14.2 After the Guarantee has expired 87 4 - Binatone Eclipse BT | User Manual - Page 7
wall outlet and obtain the service of our Repair Centre under the instructions. • If the product has been dropped and the cabinet has been damaged. • If the product exhibits a distinct change in performance. 7) NEVER use your phone outdoors during a thunderstorm. Unplug the base from the telephone - Binatone Eclipse BT | User Manual - Page 8
Content for single model The package contains the following items: • 1 Eclipse Handset • 1 Base Station • 1 Mains Power Adapter for the Base Station • 1 Telephone Line Cord • 2 AAA NiMH Rechargeable Batteries • 1 Back Cover for the Eclipse Handset • 1 Back Cover Unlock Tool • 1 User Guide Note: If - Binatone Eclipse BT | User Manual - Page 9
handset and the base unit is in accordance with the normal standards for a DECT phone: Maximum range up to 300 metres outdoors or 50 metres indoors. Be affect the range. 3) Do not place the base unit close to another telephone, TV or audio equipment - it may cause interference. 4) Putting the base - Binatone Eclipse BT | User Manual - Page 10
PHONE To the 2.1 Connecting the Base Station telephone 1) Plug the mains power cable and telephone line socket To the mains power socket line cord into the base station. 2) Plug the power adapter into a 100 - 240Vac, 50 - 60Hz mains power socket, and the telephone Main Eclipse Handset - Binatone Eclipse BT | User Manual - Page 11
charging. 2.4 Removing the back cover of the Main Eclipse Handset Insert the supplied key into the groove as indicated telephone and the telephone line; otherwise you may get interference between the telephone and the broadband, which could cause problems. In a home with broadband, every telephone - Binatone Eclipse BT | User Manual - Page 12
3 GETTING TO KNOW YOUR PHONE 3.1 Overview of the Main Eclipse Handset and the Base Station Eclipse Handset Base station (top) ① ⑮ ⑯ ② Base station (bottom) ③ ⑨ ④ ⑩ ⑤ ⑪ ⑥ ⑫ ⑰ ⑦ ⑬ ⑧ ⑭ 10 - Binatone Eclipse BT | User Manual - Page 13
MICROPHONE ⑨ m ⑩ - Displays menus, phone numbers, handset name, date/time and status to send a Flash signal (also called Recall) for network services. In standby mode, press and hold to switch the key lock During pre-dialling, press to delete the last digit entered. During a call, press to mute the - Binatone Eclipse BT | User Manual - Page 14
⑪ O ⑫ # ⑬ I ⑭ R ⑮ ⑯ ⑰ During a call, press to end the call. During programming, press to cancel and exit without making changes. In standby mode, press and hold to power the handset on/off. In standby mode, press and hold to turn the handset ringer on/off. Press and hold to add a dialling pause - Binatone Eclipse BT | User Manual - Page 15
3.2 Display Icons and Symbols on the Main Eclipse Handset The home screen of the Main Eclipse Handset gives you information on the current status of the phone. Icon Meaning Displays when the battery is fully charged. Internal segments cycle while charging. Displays when the line is in use. - Binatone Eclipse BT | User Manual - Page 16
answering machine memory is full. Turns on when confirmation of selection or programming is available. Turns on during phonebook editing mode to delete the last digit. Turns on during menu mode when you can return to the previous state or previous step. Turns on when the screen display is on. 14 - Binatone Eclipse BT | User Manual - Page 17
3.3 Overview of the Additional Handset and Charging Pod (for Twin, Triple and Quad Models Only) ① ⑮ ② ③ ⑨ ④ ⑩ ⑤ ⑪ ⑥ ⑫ ⑦ ⑬ ⑧ ⑭ 15 - Binatone Eclipse BT | User Manual - Page 18
⑥ * ⑦ F ⑧ MICROPHONE ⑨ m ⑩ - Displays menus, phone numbers, handset name and status icons. In standby mode, press to a Flash signal (also called Recall) for network services. Press to cancel an action. During pre-dialling, press to delete the last digit entered. During a call, press to mute the - Binatone Eclipse BT | User Manual - Page 19
⑪ O ⑫ # ⑬ I ⑭ R ⑮ During a call, press to end the call. During programming, press to cancel and exit without making changes. In standby mode, press and hold to power the handset on/off. In standby mode, press and hold to turn the handset ringer on/off. Press and hold to add a dialling pause when - Binatone Eclipse BT | User Manual - Page 20
the additional handsets gives you information on the current status of the phone. Icon Meaning Displays when the battery is almost empty. Displays when you have a new voicemail message. (This is a caller display service and is not usually available from UK network providers.) Displays when you - Binatone Eclipse BT | User Manual - Page 21
handset is in speaker mode. Turns on when confirmation of selection or programming is available. Turns on during phonebook editing mode to delete the last digit. Turns on during menu mode when you can return to the previous state or previous step. Turns on when the screen display is on. 19 - Binatone Eclipse BT | User Manual - Page 22
3.5 Menu Map and Menu Navigation on the Main Eclipse Handset M From the home screen of the Main Eclipse handset, press to access ANS. SYSTEM, the first option in the Main Menu list. + - Press or to go to other options in the menu list. M - Binatone Eclipse BT | User Manual - Page 23
3.6 Menu Map and Menu Navigation on the Additional Handsets (for Twin, Triple and Quad Models only) M From the home screen of your additional handset, press to access PHONEBOOK, the first option in the Main Menu list. Press + or - to go to other options in the menu list. M Press to enter a sub- - Binatone Eclipse BT | User Manual - Page 24
a short pause. m m 2. Press (main Eclipse handset) or (additional handset) to delete the last letter or number. 3.7.1 Character Map of the Main Eclipse Handset Key 1st 2nd 3rd 4th press press press press 1 Space 1 _ < 2 A B C 2 3 D E F 3 4 G H - Binatone Eclipse BT | User Manual - Page 25
3.7.2 Character Map of the Additional Handsets (for Twin, Triple and Quad Models Only) Key 1st 2nd 3rd 4th 5th 6th press press press press press press 1 Space 1 _ ( ) * 2 A B C 2 3 D E F 3 4 G H I 4 5 J K L 5 6 M N O 6 7 P Q R S 7 8 T U V 8 ? 9 - Binatone Eclipse BT | User Manual - Page 26
Pre-dialling - On Your Main Eclipse Handset 1. Enter the phone number (maximum 24 digits). If you make a mistake, press m to delete the last entered number. T 2. Press to dial the phone number. - On Your Additional Handset 1. Enter the phone number (maximum 24 digits). m If you make a mistake, press - Binatone Eclipse BT | User Manual - Page 27
selected call log number. Note: You need to subscribe to Caller Line Identification service to be able to see the caller's number or name in the call log. 4.1.5 Call from the Phonebook - On Your Main Eclipse Handset - 1. Press in standby mode. + - 2. Press / to select the desired entry in the - Binatone Eclipse BT | User Manual - Page 28
4.2 Answer and End a Call T 1. When the phone rings, press on your Main Eclipse Handset or T press on your additional handset. O 2. To end a conversation, press on your Main Eclipse Handset or O press on your additional handset. Warning: When the handset is ringing, please do not hold it too close - Binatone Eclipse BT | User Manual - Page 29
your caller cannot hear you. m m During a call, press (Main Eclipse handset) or press (additional handsets) to turn on/off the microphone. . 4.8 Switching the Handset On/Off O O Press and hold on your main Eclipse Handset or press on the additional handsets for more than 2 seconds to switch the - Binatone Eclipse BT | User Manual - Page 30
allows an intercom call between any two handsets registered to the same telephone base. It also allows you to transfer external calls from one handset to call or press to call all handsets. T T 3. Press (main Eclipse handset) or (additional handsets) on a called handset to answer the internal - Binatone Eclipse BT | User Manual - Page 31
put the intercom call on hold. 4) When the incoming external call is connected and the intercom call I I is on hold, press and hold (main Eclipse handset) or (additional handsets) to start a three-party conference call with both the incoming and the intercom parties. 5) When either the main - Binatone Eclipse BT | User Manual - Page 32
. Note: If there is no answer from the called handset, or you wish to cancel I the intercom call before it is answered, press (main Eclipse handset) I or (additional handsets) to return to the external call. T T 3. Press or on the called handset to answer the internal call, where both internal - Binatone Eclipse BT | User Manual - Page 33
) or (additional handsets) on the called handset to answer the internal call, where both internal callers can talk. O O 4. Press (main Eclipse handset) or (additional handsets) on the originating handset to transfer the external call to the called handset. • The external call is transferred. 31 - Binatone Eclipse BT | User Manual - Page 34
press on the keys in standby mode will automatically dial the stored phone number. 5.1 Add Direct Access Memory - On Your Main Eclipse Handset M 1. From the home screen, press . + - M press to delete the last digit entered. • A confirmation tone is played. O 9. Press to return to standby mode. - Binatone Eclipse BT | User Manual - Page 35
ENTER NUMBER if it is empty. M 8. Edit or enter the number of your contact and press . m If you make a mistake, press to delete the last digit entered. • A confirmation tone is played. O 9. Press to return to standby mode. 33 - Binatone Eclipse BT | User Manual - Page 36
5.2 Delete Direct Access Memory - On Your Main Eclipse Handset M 1. From the home screen, press . + - M 2. Press / to PHONEBOOK and then press to select. + - M 3. Press / to DIRECT MEM. and then press to select. + - M 4. Press / to - Binatone Eclipse BT | User Manual - Page 37
can store up to 100 phonebook entries. Each phonebook entry can have a maximum of 24 digits for the phone number and 12 characters for the name. 6.1 Store a Contact in the Phonebook - On Your Main Eclipse Handset M 1. From the home screen, press . + - M 2. Press / to PHONEBOOK and then press to - Binatone Eclipse BT | User Manual - Page 38
, you have to delete existing entries to make space for new ones. When storing the number for a local call, you can enter only the 6 or 7-digit local number without STD (area) code, and it will still display the name if there is an incoming call and you subscribe to caller display - Binatone Eclipse BT | User Manual - Page 39
of entries. M 3. Press to view the details of the selected entry. O 4. Press to return to standby mode. Note: + - Instead of pressing / (main Eclipse handset) or +\- (additional handsets) to browse the phonebook entries, you can press the numeric key corresponding to the first letter of the - Binatone Eclipse BT | User Manual - Page 40
6.3 Modify a Phonebook Entry - On Your Main Eclipse Handset - 1. From the home screen, press to open the phonebook list. + - 2. Press / to select the entry you want to modify. M 3. Press to open the phonebook - Binatone Eclipse BT | User Manual - Page 41
6.4 Delete a Phonebook Entry - On Your Main Eclipse Handset - 1. From the home screen, press to open the phonebook list. + - 2. Press / to select the entry you want to delete. M 3. Press to open the phonebook - Binatone Eclipse BT | User Manual - Page 42
6.5 Delete All Entries from the Phonebook List - On Your Main Eclipse Handset - 1. From the home screen, press to open the phonebook list. M 2. Press to open the phonebook menu options. + - M 3. Press / to DELETE ALL and then press - Binatone Eclipse BT | User Manual - Page 43
subscribed to the Calling Line Identification (CLI) service with your network service provider, the phone number of your caller will appear on the Log The Call Log stores the last 20 external calls for the Main Eclipse Handset and the last 10 external calls for the additional handsets, whether or - Binatone Eclipse BT | User Manual - Page 44
in chronological order with the most recent call at the top of the list. 7.1.2 Save a Call Log Entry into the Phonebook - On Your Main Eclipse Handset + 1. From the home screen, press . + - M 2. Press / to select an entry and then press . M 3. Press again to select SAVE NUMBER. 4. Enter the - Binatone Eclipse BT | User Manual - Page 45
. • A confirmation tone is played. O 5. Press to return to standby mode. 7.1.4 Delete All Entries in the Call Log - On Your Main Eclipse Handset + 1. From the home screen, press . M 2. Press . + - M 3. Press / to DELETE ALL and then press to select. • CONFIRM? is displayed. M 4. Press - Binatone Eclipse BT | User Manual - Page 46
will appear first in the redial list. • If the number has more than 14 digits on the Main Eclipse # Handset, press to see other digits; if the number has more m than 12 digits on the additional handset, press to see the other digits. 7.2.2 Save a Redial Number into the Phonebook - On Your Main - Binatone Eclipse BT | User Manual - Page 47
12 characters) and then press M. • A confirmation tone is played. O 5. Press to return to standby mode. 7.2.3 Edit a Redial Number - On Your Main Eclipse Handset R 1. From the home screen, press . + - M 2. Press / to select an entry and then press . + - M 3. Press / to EDIT ENTRY and then - Binatone Eclipse BT | User Manual - Page 48
. • A confirmation tone is played. O 5. Press to return to standby mode. 7.2.5 Delete All Entries from the Redial List - On Your Main Eclipse Handset R 1. From the home screen, press . M 2. Press . + - M 3. Press / to DELETE ALL and then press to select. • CONFIRM? is displayed. M 4. Press - Binatone Eclipse BT | User Manual - Page 49
- On Your Additional Handset R 1. From the home screen, press . 2. Press M. M 3. Press +\- to DELETE ALL and then press to select. • DELETE? is displayed. M 4. Press again to confirm. • A confirmation tone played. 47 - Binatone Eclipse BT | User Manual - Page 50
also set the date and time manually. - On Your Main Eclipse Handset M 1. From the home screen, press . + - M 2. Press / to CLOCK&ALARM and the press to select. M 3. Press again to select DATE & TIME. • The last stored date is displayed, with the third digit of the year flashing. M 4. Enter - Binatone Eclipse BT | User Manual - Page 51
+\- to CLOCK&ALARM and the press to select. M 3. Press again to select DATE/TIME. • The last stored date is displayed, with the third digit of the year flashing. M 4. Enter the current date and press to confirm. Enter 03 May 2012 as [1], [2], [0], [5], [0], [3]. m If you make a mistake, press to - Binatone Eclipse BT | User Manual - Page 52
the Time Format The time can be displayed either as 12-hour or 24-hour. The default setting is 24 HOURS. - On Your Main Eclipse Handset M 1. From the home screen, press . + - M 2. Press / to CLOCK&ALARM and then press to select. + - M 3. Press / to SET FORMAT and then press to select - Binatone Eclipse BT | User Manual - Page 53
the Date Format The date can be displayed either as Month/Day or Day/Month. The default setting is DD/MM. - On Your Main Eclipse Handset M 1. From the home screen, press . + - M 2. Press / to CLOCK&ALARM and then press to select. + - M 3. Press / to SET FORMAT and then press to select - Binatone Eclipse BT | User Manual - Page 54
1. When the alarm rings, you can press any key on the handset to stop the ringing, even if the keylock is activated. - On Your Main Eclipse Handset M 1. From the home screen, press . + - M 2. Press / to CLOCK&ALARM and then press to select. + - M 3. Press / to ALARM and then press to select - Binatone Eclipse BT | User Manual - Page 55
tone is played. O 8. Press to return to standby mode. 8.2.1 Set the Alarm Tone You can select from 3 alarm melodies. - On Your Main Eclipse Handset M 1. From the home screen, press . + - M 2. Press / to CLOCK&ALARM and then press to select. + - M 3. Press / to ALARM MELODY and then press - Binatone Eclipse BT | User Manual - Page 56
- On Your Additional Handset M 1. From the home screen, press . M 2. Press +\- to CLOCK&ALARM and then press to select. M 3. Press +\- to ALARM TONE and then press to select. 4. Press +\- to select the desired alarm tone (each tone will M sound as it is selected) and then press to confirm. • A - Binatone Eclipse BT | User Manual - Page 57
of settings that you can change to personalise your phone to the way you like it to work. 9.1 Set the Ring Volume You can set the handset ringer volume from Level 1 to Level 4 or turn the ringer off. - On Your Main Eclipse Handset M 1. From the home screen, press . + - M 2. Press / to - Binatone Eclipse BT | User Manual - Page 58
9.2 Set the Ring Tone You can select from 10 ringer melodies for both internal and external calls. - On Your Main Eclipse Handset M 1. From the home screen, press . + - M 2. Press / to HANDSET OPTS and then press to select. + - M 3. Press / to RINGER&TONES and then press to select. + - M 4. - Binatone Eclipse BT | User Manual - Page 59
emits a tone with each key press. You can choose to turn this tone on or off. The default setting is ON. - On Your Main Eclipse Handset M 1. From the home screen, press . + - M 2. Press / to HANDSET OPTS and then press to select. + - M 3. Press / to RINGER&TONES and then press to select - Binatone Eclipse BT | User Manual - Page 60
9.4 Rename the Handset You can personalise your handset by changing the name shown on the handset in standby mode. - On Your Main Eclipse Handset M 1. From the home screen, press . + - M 2. Press / to HANDSET OPTS and then press . M 3. Press to select HANDSET NAME. • The current handset name - Binatone Eclipse BT | User Manual - Page 61
9.5 Set the Display Language You can change the display language on your handset. The default setting is ENGLISH. - On Your Main Eclipse Handset M 1. From the home screen, press . + - M 2. Press / to HANDSET OPTS and then press to select. + - M 3. Press / to LANGUAGE and then press to select - Binatone Eclipse BT | User Manual - Page 62
handset) or charging pod (additional handsets). By default, the Auto Hang-up feature is ON, but it can be turned off. - On Your Main Eclipse Handset M 1. From the home screen, press . + - M 2. Press / to HANDSET OPTS and then press to select. + - M 3. Press / to AUTO HANG-UP and then press to - Binatone Eclipse BT | User Manual - Page 63
Handset Registration IMPORTANT: When you purchase your phone system, all handsets are already registered to your handsets. The default Master PIN is 0000. 10.2 Register Additional Handsets - For a Main Eclipse Type Handset 1. Press and hold the key under the base unit for approximately 5 seconds. - Binatone Eclipse BT | User Manual - Page 64
the handset you are using, or any other handset registered to the same base. The default Master PIN is 0000. - Using Your Main Eclipse Handset M 1. From the home screen, press . + - M 2. Press / to SETTINGS and then press to select. + - M 3. Press / to DEREGISTER and then press to select - Binatone Eclipse BT | User Manual - Page 65
default Master PIN number is 0000. The maximum length of the Master PIN is 8 digits. Note: If you forget your PIN code, you can reset it to its default 0000 using a handset Reset. - On Your Main Eclipse Handset M 1. From the home screen, press . + - M 2. Press / to SETTINGS and then press to - Binatone Eclipse BT | User Manual - Page 66
return to the home screen. 10.5 Set the First Ring (for Additional Handsets Only) If you have subscribed to Caller Line Identification service and do not wish to hear the phone ring before the caller identification is displayed, you can set the FIRST RING to OFF. M 1. From the home screen of your - Binatone Eclipse BT | User Manual - Page 67
services. You should normally leave the Recall Time at its default setting, Short (100ms), as this is the standard recall required in the UK telephone or Long (600ms) if your telephone is connected to a PBX that requires a different recall time. - On Your Main Eclipse Handset M 1. From the home - Binatone Eclipse BT | User Manual - Page 68
call log and redial list entries will be deleted and the phone will return to its default settings, including the Master PIN. However messages will remain unchanged, while all other settings will be reset. - On Your Main Eclipse Handset M 1. From the home screen, press . + - M 2. Press / to - Binatone Eclipse BT | User Manual - Page 69
11 ANSWERING MACHINE Your phone includes a telephone answering machine that records unanswered calls the answering machine LED on the base flashes rapidly, the answering machine icon on the Main Eclipse Handset flashes slowly, and the ANSWER ONLY announcement will be played to new callers. You will - Binatone Eclipse BT | User Manual - Page 70
ONLY announcement will play. (See Remote Access on page 78.) 11.2 Answer Mode The phone comes with two pre-recorded announcements for the respective answer modes: ANSWER ONLY and RECORD MSGS on the Main Eclipse Handset or ANSWER ONLY and ANSW.&RECORD on the additional handsets. By default, the - Binatone Eclipse BT | User Manual - Page 71
, you must set your RING DELAY to less than 6 rings; otherwise the network service will answer all your calls before the answering machine of your telephone and prevent it from recording any messages. - On Your Main Eclipse Handset M 1. From the home screen, press . M 2. Press again to select ANS - Binatone Eclipse BT | User Manual - Page 72
can save you the cost of a long-distance call when you check your messages remotely. 11.3.2 Activate/Deactivate Remote Access - On Your Main Eclipse Handset M 1. From the home screen, press . M 2. Press again to select ANS. SYSTEM. + - M 3. Press / to ANS. SETTING and then press to select - Binatone Eclipse BT | User Manual - Page 73
machine when you are away from home, by calling from another phone. The Master PIN is used for accessing the answering machine remotely. machine's pre- recorded announcements. The default setting is ENGLISH. - On Your Main Eclipse Handset M 1. From the home screen, press . M 4. Press again to - Binatone Eclipse BT | User Manual - Page 74
11.4 Message Playback When there are new messages on the answering machine, the tape icon flashes on the handset screen. - On Your Main Eclipse Handset M 1. From the home screen, press . M 2. Press again to select ANS. SYSTEM. M 3. Press again to select PLAY. • Your messages will automatically - Binatone Eclipse BT | User Manual - Page 75
All Messages Note: Only old messages can be deleted. New messages must be played before they can be deleted. - On Your Main Eclipse Handset M 1. From the home screen, press . M 2. Press again to select ANS. SYSTEM. + - M 3. Press / to select DELETE ALL and then press . M 4. Press again - Binatone Eclipse BT | User Manual - Page 76
announcement is played to the caller unless you have recorded your own announcement. The phone comes with two pre-recorded announcements for the respective answer modes: ANSWER ONLY and RECORD MSGS on the Main Eclipse Handset or ANSWER ONLY and ANSW.&RECORD on the additional handsets. By default - Binatone Eclipse BT | User Manual - Page 77
to return to standby mode. 11.6.2 Listen to an announcement - On Your Main Eclipse Handset M 1. From the home screen, press . M 2. Press again to confirm. M 5. Press to select PLAY. • The announcement plays through the phone's speaker. F • Press if you wish to listen to the announcement privately - Binatone Eclipse BT | User Manual - Page 78
confirm. M 5. Press to select PLAY. • The announcement plays through the phone's speaker. T • Press if you wish to listen to the announcement privately default announcement, simply delete your personal announcement. - On Your Main Eclipse Handset M 1. From the home screen, press . M 2. Press - Binatone Eclipse BT | User Manual - Page 79
ONLY or ANSW.&RECORD and M then press to confirm. 5. Press +\- to DELETE and press M to confirm. • The default pre-recorded outgoing message plays through the phone's speaker. T • Press if you wish to listen to the message privately over the earpiece. O 6. Press to return to standby mode. 77 - Binatone Eclipse BT | User Manual - Page 80
Master PIN code) within 8 seconds using the numeric keypad on the touch-tone phone. Note that the answering machine will drop the call if you do not enter 7 Turn on the answering machine in RECORD MSGS mode (main Eclipse handset) or ANSW.&RECORD mode (additional handsets). 8 Stop message playback. - Binatone Eclipse BT | User Manual - Page 81
7. When you have finished listening to your messages, simply hang up the phone to end. Note: If your answering machine is off but Remote Access is activated (See Activate/Deactivate Remote Access on page 70 ), the answering machine - Binatone Eclipse BT | User Manual - Page 82
iDECT Eclipse System Rseymsottee moperation 1. Using a tone-dialling phone, dial your home number. 2. While your announcement See Activate/Deactivate Remote Access on page 70 of the User Guide) and Master PIN changed from its default, the phone will answer after 14 rings, and you can then enter the - Binatone Eclipse BT | User Manual - Page 83
message. 2 Playback messages / Repeat current message. 3 Skip to the next message. 6 Delete the current message. 7 Turn on the answering machine in RECORD MSGS mode (main Eclipse handset) or ANSW.&RECORD mode (additional handsets). 8 Stop message playback. 9 Turn off the answering machine. 81 - Binatone Eclipse BT | User Manual - Page 84
TROUBLESHOOTING ALWAYS check that: You have followed all the steps listed in the user guide to install and set up your telephone Eclipse phone - not just for charging the handset batteries. Make sure that you are using the telephone line cable supplied with your phone. Other telephone the problem. - Binatone Eclipse BT | User Manual - Page 85
power is switched on. The base unit needs mains power for normal operation of the phone - not just for charging the batteries. Make sure that you are using the telephone line cable that was supplied with your phone. Make sure that the ringer volume settings are not set to off. Increase the ringer - Binatone Eclipse BT | User Manual - Page 86
" You need to subscribe to the Caller Line Identification service from your network service provider. The caller may have withheld their number by entry" The maximum number of 200 phonebook entries on your Main Eclipse Handset or 100 phonebook entries on your additional handset has been reached - Binatone Eclipse BT | User Manual - Page 87
Disconnect the base unit from the telephone line and plug a different phone into the Eclipse telephone socket. Try making a call. telephone directly into the socket. If the call now works, the adapter may be faulty. If you cannot make a call, the fault may be on the exchange line. Contact the service - Binatone Eclipse BT | User Manual - Page 88
We the manufacturer / Importer: Binatone Telecom Plc, 1 Apsley Way London, NW2 7HF. Declare under our sole responsibility that the following product Type of equipment: Digital Cordless Telephone Country of Origin: China Brand: iDECT Model name: Eclipse complies with the essential - Binatone Eclipse BT | User Manual - Page 89
14 GUARANTEE AND SERVICE The phone system is guaranteed for 12 months from the date of purchase shown on your sales receipt. This guarantee does not cover any faults or defects caused by accidents, misuse, fair wear and tear, neglect, faults on the telephone line, lightning, tampering with the
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
 |
 |
USER GUIDE
Eclipse
Eclipse
Eclipse
Eclipse Plus
Plus
Plus
Plus
Single
Single
Single
Single/Twin/Triple/Quad
/Twin/Triple/Quad
/Twin/Triple/Quad
/Twin/Triple/Quad
DECT
DECT
DECT
DECT Telephone
Telephone
Telephone
Telephone
with Answer
with Answer
with Answer
with Answering
ing
ing
ing Machine
Machine
Machine
Machine
Binatone Helpline
Binatone Helpline
Binatone Helpline
Binatone Helpline
(for UK only)
(for UK only)
(for UK only)
(for UK only)
Monday to Friday
from 9:00am to 5:00pm
Tel: 0845 345 9677**
**Please note that all calls are charged at local rate.
Or visit our websites: www.binatonetelecom.com
www.binatonetelecom.com
www.binatonetelecom.com
www.binatonetelecom.com
www.iDECTonline.com
www.iDECTonline.com
www.iDECTonline.com
www.iDECTonline.com
Before operating this set,
Before operating this set,
Before operating this set,
Before operating this set,
please read these instructions carefully.
please read these instructions carefully.
please read these instructions carefully.
please read these instructions carefully.
THIS
THIS
THIS
THIS
EQUIPMENT
EQUIPMENT
EQUIPMENT
EQUIPMENT
IS
IS
IS
IS
NOT
NOT
NOT
NOT
DESIGNED
DESIGNED
DESIGNED
DESIGNED
FOR
FOR
FOR
FOR
MAKING EMERGENCY
MAKING EMERGENCY
MAKING EMERGENCY
MAKING EMERGENCY
TELEPHONE
TELEPHONE
TELEPHONE
TELEPHONE
CALLS
CALLS
CALLS
CALLS
WITHOUT
WITHOUT
WITHOUT
WITHOUT MAINS POWER.
MAINS POWER.
MAINS POWER.
MAINS POWER.
ALTERNATIVE
ALTERNATIVE
ALTERNATIVE
ALTERNATIVE
ARRANGEMENTS
ARRANGEMENTS
ARRANGEMENTS
ARRANGEMENTS
SHOULD
SHOULD
SHOULD
SHOULD
BE MADE
BE MADE
BE MADE
BE MADE
FOR
FOR
FOR
FOR
ACCESS
ACCESS
ACCESS
ACCESS
TO
TO
TO
TO
EMERGENCY
EMERGENCY
EMERGENCY
EMERGENCY
SERVICES.
SERVICES.
SERVICES.
SERVICES.