Binatone MBP 36S User Guide
Binatone MBP 36S Manual
 |
View all Binatone MBP 36S manuals
Add to My Manuals
Save this manual to your list of manuals |
Binatone MBP 36S manual content summary:
- Binatone MBP 36S | User Guide - Page 1
USER'S GUIDE MBP36 BABY MONITOR USER'S GUIDE The features described in user's guide are subject to modifications without prior notice. - Binatone MBP 36S | User Guide - Page 2
call: US and Canada 1-888-331-3383 UK 0845 218 0890 On the Web: www.motorola.com This User's Guide provides you with all the information you need to get the most from your product. Before you can use the baby monitor, we recommend you insert and fully charge the battery in the parent unit - Binatone MBP 36S | User Guide - Page 3
Right 6. Menu Key M Press to open the Menu options 7. OK Key O 8. Video ON/OFF Key V Press to turn OFF the LCD display Press again to turn ON T Press and hold to speak to your baby 10. Power Adapter / Battery LED BLUE when mains adapter power on. RED when battery low. 11. Unit ON/OFF LED (Green - Binatone MBP 36S | User Guide - Page 4
Sensor (Night Vision Mode) 2. Camera Lens 3. Infared LEDs 4. Power LED 5. Microphone 6. Speaker 7. ON/OFF Switch 8. Power Adapter Connector 9. Antenna 10. Temperature Sensor 11. Pair Key Important guidelines for installing your Baby Monitor • To use your Video Monitor Baby and Parent Unit together - Binatone MBP 36S | User Guide - Page 5
ENGLISH Table of contents 1. Safety Instructions 6 2. Getting Started 8 2.1 Baby Unit Power Supply 8 2.2 Parent Unit Battery Installation 8 2.3 Parent Unit Power Supply 9 2.4 Registration (Pairing 10 2.5 View Video Through TV 10 3. Using the Baby Monitor MBP36 11 3.1 Setting up 11 3.2 Pan - Binatone MBP 36S | User Guide - Page 6
keep cord away from the baby's reach. WARNING This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User's Guide, safe to use. Therefore, always read the instructions in this User's Guide carefully before using the device - Binatone MBP 36S | User Guide - Page 7
use. • Do not use the baby monitor near water. • Do not install the baby monitor near a heat source. • Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack. • Only insert a battery pack of the same type. • Do - Binatone MBP 36S | User Guide - Page 8
Slide the ON/OFF switch to the OFF position to turn the Baby Unit off. 2.2 Parent Unit Battery Installation Black Red 1. Insert the wire tab of the rechargeable battery pack into the contact slot as shown above and fit the battery pack into the compartment. Small cross head or Flat end screw driver - Binatone MBP 36S | User Guide - Page 9
parent unit will show the video captured by the baby unit. 4. If there is no connection or you are out of range, the video display will go off and plugged in, a adapter logo will display on screen and then a flashing battery logo will display for 45 sec. The Blue LED at top left corner light up - Binatone MBP 36S | User Guide - Page 10
During power ON, when adapter is plugged in, the battery icon on screen's top right corner will show that the battery is charging. The Blue LED at the top left corner light up indicates adapter is plugged in. 2.4 Registration (Pairing) The Baby monitor is pre-registered to your Parent Unit. You do - Binatone MBP 36S | User Guide - Page 11
ENGLISH 3. Using the Baby Monitor MBP36 3.1 Setting up • Place the baby unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. • Adjust the baby unit's head angle by rotating the camera up, down, left and right until you are satisfied with - Binatone MBP 36S | User Guide - Page 12
4. MBP36 Parent Unit Menu Options 4.1 Volume 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > button until * is Z is highlighted. 3. Press the + UP button or - DOWN button to select the 1X or 2X Zoom. (The default setting is 1X.) 12 MBP36 Parent Unit Menu Options - Binatone MBP 36S | User Guide - Page 13
Press and hold the PAIR button underneath the baby unit until the parent unit finds the camera, beeps and the picture from the camera appears. NOTE A camera can only be registered to one parent unit at and press the OK button to view the picture from that camera. MBP36 Parent Unit Menu Options 13 - Binatone MBP 36S | User Guide - Page 14
or - DOWN button to select the desired CAM, and press the OK button to delete that registration. 4.6.4 Scan camera 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT Press the + UP button or - DOWN button to select ºC or ºF. 14 MBP36 Parent Unit Menu Options - Binatone MBP 36S | User Guide - Page 15
the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. Some of the product materials can be reused if collection points in your area. Dispose of the battery pack in an environmentally-friendly manner according to your local regulations - Binatone MBP 36S | User Guide - Page 16
6. Cleaning Clean the MBP36 with a slightly damp cloth or with an anti-static cloth. Never use -- this may cause permanent damage to the product which is not covered by the warranty. • Keep your MBP36 away from hot, humid areas or strong sunlight, and don't let it get wet. • Every effort has been - Binatone MBP 36S | User Guide - Page 17
camera selected? Change the camera number, if necessary. • Is the video display turned on? Press the VIDEO ON/OFF key V to turn it on. • When operating using batteries, If the Baby Unit has lost its link with the Parent Unit • Try recharging or replacing the battery pack. • If the Baby Unit is too - Binatone MBP 36S | User Guide - Page 18
other 2.4GHz products, such as wireless networks (WiFi routers), Bluetooth® systems, or microwave ovens, may cause interference with this product, so keep the baby monitor away at least 5ft (1m) from these types of products, or turn them off if they appear to be causing interference. • If the signal - Binatone MBP 36S | User Guide - Page 19
not working properly.... 1. Read this User's Guide or the Quick Start Guide. 2. Visit our website: www.motorola.com 3. Contact Customer Service: US and Canada 1-888-331-3383 UK 0845 218 0890 To order a replacement battery pack, contact customer service or visit our website. Consumer Products - Binatone MBP 36S | User Guide - Page 20
WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL MOTOROLA OR BINATONE BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR ACCESSORY, OR FOR - Binatone MBP 36S | User Guide - Page 21
excluded from coverage. Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered acts which are not the fault of MOTOROLA or BINATONE, are excluded from coverage. Use of Non-Motorola branded Products and Accessories. Defects or - Binatone MBP 36S | User Guide - Page 22
MOTOROLA, BINATONE or its authorized service service or information, please call: US and Canada 1-888-331-3383 UK 0845 218 0890 You will receive instructions on how to ship the Products or Accessories at your expense and risk, to a BINATONE Authorized Repair Center. To obtain service the problem; - Binatone MBP 36S | User Guide - Page 23
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there This product has been tested and found to comply with the FCC criteria. The Baby unit shall be installed and used such that parts of the user's body other than - Binatone MBP 36S | User Guide - Page 24
approved by the party responsible for compliance could void the user's authority to operate the equipment. Industry Canada This device complies with Industry Canada licence-exempt RSS standard(s): Operation is subject to the following Two conditions:(1) this device may not cause interference - Binatone MBP 36S | User Guide - Page 25
ENGLISH Technical Specifications Baby unit (Model: MBP36BU) Frequency 2.4GHz to 2.48GHz Image sensor colour / color CMOS 30M Pixels Lens f 2.5mm, F 2.8 IR LED 8 pcs Power Adapter: SCE0591000P; Input: 100-240V, - Binatone MBP 36S | User Guide - Page 26
TFL3X44AAA900, NI-MH AAA 3 x 1.2V 900mAh rechargeable battery pack WARNING Do not use non-rechargeable batteries for the Parent Unit. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. FCC ID VLJ - MBP36PU IC ID 4522A- MBP36PU - Binatone MBP 36S | User Guide - Page 27
We the manufacturer / Importer : Binatone Telecom Plc 1 Apsley Way London NW2 7HF, United Kingdom. Declare under our sole responsibility that the following product Type of equipment: Model Name: Digital Baby Monitor MBP 36 Country of Origin: Brand: China Motorola complies with the essential - Binatone MBP 36S | User Guide - Page 28
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo, are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
 |
 |
USER°S GUIDE
MBP36
BABY MONITOR
USER°S GUIDE
The features described in user’s guide are subject to
modifications without prior notice.