Binatone Symphony 3325 User Manual

THIS EQUIPMENT IS NOT DESIGNED FOR MAKING

EMERGENCY TELEPHONE CALLS WHEN THE POWER

FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE

MADE FOR ACCESS TO DIAL EMERGENCY SERVICES.

Before operating this set,

please read these instructions carefully.

USER GUIDE

Package Contents

Handset - Base Connection

1) When purchased, all handsets are already registered to the base unit

and should link to it when they are all powered up.

2) To use your cordless handset and base unit together, you must be

able to establish a radio link between them. The signal between the

> Any large metal object, such as a refrigerator, mirror or filing cabinet,

between the handset and the base unit may block the radio signal.

> Other solid structures, like walls, may reduce the signal strength.

> Other electrical equipment may cause interference and/or affect the range.

3) Do not place close to another telephone, a TV or audio equipment - it

may cause interference.

4) Out of Range warning. If you hear a warning tone during a call,

and/or the sound in the earpiece becomes faint or distorted, you may be

going out of range of the base unit, so move nearer to the base unit

within 20 seconds, otherwise the call may be cut off.

a DECT phone: Maximum range up to 300 metres outdoors or 50

handset and the base is in accordance with the normal standards for

metres indoors. Be aware that:

Connection and Conditions for use:

You can connect your phone to a direct exchange line (DEL) on a local

exchange with its own phone number; to an extension socket

connected to a DEL; or to an extension on an approved compatible

PBX. Do not connect as an extension to a payphone.

The ringer equivalence number (REN) of all equipment (phones, fax

machines, modems, etc.) connected to an exchange line must not add

up to more than 4, otherwise one or more of them may not ring and/or

answer calls correctly. This phone has a REN of 1, and most other

telephones have a REN of 1 unless marked otherwise.

1 Handset (2 with a Twin system, 3 with a Triple system)

1 Base Station

1 Mains Power Adapter

1 Telephone Line Cord

2 Rechargeable Batteries for each handset

1 Charger Pod with mains power adapter for each additional

1 User Guide

handset of a multi-handset system

•

•

•

•

•

•

•

1

TECHNICAL DETAILS

Standard

Frequency range

Channel bandwidth

Operating range

Operating time

Temperature range

Digital Enhanced Cordless

Telecommunication(DECT)

1.88 to 1.9GHz (bandwidth = 20 MHz)

1.728 MHz

Up to 300m outdoors; up to 50m indoors

Standby: 100 hours. Talking: 10 hours

Battery charge time:15 hours

Operating 0 C to 40 C, Storage -20 C to 60 C

Port specification

The

port (connect ed to the mains power supply) is a

SELV port with respect to EN41003.

Every effort has been made to ensure high standards of reliability for your

consult your supplier or the Helpline.

do not try to

Electrical power

Charger unit:

Handset Battery Information :

2 x AAA size NiMH 400mAh

Base unit:

input 100-240VAC 50/60Hz 150mA, output 6VDC 450mA

input 100-240VAC 50/60Hz 1

5

0mA, output 6VDC 300mA

Caution

Risk of explosion if battery is replaced by an incorrect type

Dispose of used batteries according to the instructions.

The

port (connected

to the telephone line) is a TNV port with

respect

to

system. However, if something does go wrong, please

repair it yourself,

EN41003.

2

3

4

1

IMPORTANT SAFETY INSTRUCTIONS

When using your telephone equipment, basic safety precautions should always be

followed to reduce the risk of fire, electric shock and injury, including the following:

1)

Read and understand all the instructions.

2)

Follow all warnings and instructions marked on the product.

3)

Unplug this product from the wall outlet before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a damp cloth for cleaning.

4)

Do not use this product near water (for example, near a bath tub, kitchen

sink, swimming pool).

5)

Do not overload wall outlets and extension cords as this can result in the

risk of

fire or electric shock.

6)

Unplug this product from the wall outlet and refer servicing to our Repair

•

•

•

•

7)

NEVER use your cordless telephone outdoors during a thunderstorm -

8)

Do not use the telephone to report a gas leak in the vicinity of the leak.

9)

Use only the supplied NiMH (Nickel Metal Hydride) batteries! The

operation periods for the handsets are only applicable with the default

battery capacities.

10)

The use of other battery types or non-rechargeable batteries/primary cells

can be dangerous. These may cause interference and/or

damage to the

11)

Do not use third party charging bays, as they may cause damage to the

12)

Please ensure the batteries are inserted in the correct polarity.

13)

Dispose of batteries safely. Do not immerse them in water, burn them, or

The manufacturer will not be held liable for damage arising from such

non-compliance.

When the power supply cord or plug is damaged or frayed.

If the product does not operate normally by following the operating

If the product has been dropped and the cabinet has been damaged.

If the product exhibits a distinct change in performance.

Centre under the following conditions:

unplug the base from the telephone line and the mains socket when there

put them where they could get punctured.

are storms in your area. Damage caused by lightning is not covered by

unit or surroundings.

instructions.

the guarantee.

5

6

2

INSTALLING YOUR PHONE

2.1

Connecting the base station

1)

Plug the power

adapter

& line cord

into the base station.

2)

Plug the power

adapter into a 230Vac, 50Hz

2.2

Installing and charging the batteries

1)

Slide open the battery compartment cover.

2)

Place the 2 batteries

with the correct polarity,

3)

Slide the battery compartment cover back.

4)

Put the handset on the base and charge for

15 hours before first time use. The handset

beeps when charging starts.

as shown.

Warning:

Always use the line cord provided in the box.

Warning:

Only use the power adapter supplied.

Warning:

The Base unit needs mains power for

Other line cords may not be compatible and may not work.

Others will result in non-compliance with the safety

specification EN60950, and will invalidate any approval

given with this apparatus.

normal operation, not just for charging the handset batteries.

If you connect your telephone to a line with a broadband connection, you will need to

insert a micro-filter between the telephone and the telephone line, otherwise you may

get interference between the telephone and the broadband, which could cause

problems.

In a home with broadband, every telephone must have a micro-filter

just the one at the telephone point that your modem is connected to.

If you need more broadband micro-filters, contact your broadband provider.

2.3

If you have a Broadband Line

Warning:

Only use the AAA size NiMH rechargeable

mains socket, the other end of the line cord

into your telephone line socket.

batteries.

3

GETTING TO KNOW YOUR PHONE

3.1

Overview of the Handset

connected, not

7

3.3

Display Icons and Symbols

The LCD display gives you information on the current status of the telephone.

Steady when the handset is in range of the base. Flashes when out of

Steady when an intercom call is in progress.

Flashes during intercom ringing.

Steady on when a call is in progress.

On when the speakerphone is turned on.

Steady on

when the telephone answering machine (TAM) is turned on.

Flashes when there is a new TAM messages.

Indicates that the handset ringer is switched off.

Indicates when the battery is fully charged.

Whole icon flashes when the battery is charging.

Internal

block

icon flashes when the battery i

s in final charging stage.

range

of the base or not registered to the base.

Flashes when there is an incoming call.

Steady on when an alarm is set.

Flashes when the alarm time has been reached.

On when the keypad is locked.

On when you have a new Voice Mail message. (This is a caller display

service and is not usually available from UK network providers.)

Indicates when there are more characters or numbers in front of those

Indicates when there are more characters or numbers after those being

Press

Indicates when the battery needs charging.

Flashes when low battery power level is detected.

being displayed.

displayed.

(MENU)

1.

PAGE

Press the Page on the base station to page your

Press to turn on the answering machine.

Press again to turn off the answering machine.

Press to play the message.

Press to stop the message playback.

Press to repeat playing the current message from the beginning.

Press to skip the current message and play the next message

Increase (+) speaker volume

Decrease (-) speaker volume

Press once to delete the message during playback

Press and hold to delete all the old messages

handset. It will ring for approximately 60 seconds.

10.

7-SEG LED DISPLAY

3.2

Base Station with Telephone Answering Machine (TAM) Control

2.

CHARGING CRADLE

- -

Steady ON : The

answering machine is

turned OFF.

00

Steady ON: Answering

XX

Flashing: There are XX new messages recorded where XX is from

01 to 59

Steady ON: There are XX old messages in the TAM memory and no new

XX/FFFlashing XX alternately with FF: There are XX new voice messages

recorded and the TAM memory is full.

Flashing FF : TheTAM memory is full and there are no new messages.

- - /XX

Flashing XX alternately with - -: The time is not set and there are XX

Flashing--: The time is not set and there are no new messages recorded.

1

2

3

3.

TAM ON/OFF

4.

VOLUME UP (+)

5.

VOLUME DOWN (-)

4

5

6

6.

PLAY/STOP

7.

SKIP BACKWARD

8.

SKIP FORWARD

7

8

9.

DELETE

9

10

A1/A2

Steady ON: Playing the current outgoing message (OGM) where

XX/An

Flashing XX alternately with An: Currently recording the new XX

Flashing: Remote access is in progress from a handset or via the

8

Press the MENU/OK key to confirm the current selection

Indicates a new TAM message is playing or a new call is being viewed in

Press

(BACK)

Press the C/

key to go back to previous menu level or cancel the current

the Call List.

(INT)

Press the C/

key to clear a character or stop the alarm

unmute the microphone during a call.

3.4

Menu Structure

In idle mode, press <MENU/OK>

to go to CALL LIST, the first option in the

menu list.

Main

Menu

CALL LIST

PHONEBOOK

BS

SETTINGS

HS

SETTINGS

REGISTRATION

DEFAULT

Sub

menu

PIN? - - - -

<UP/DOWN>

Key

Binatone Symphony 3325 User Manual

Binatone Symphony 3325 Manual

Binatone Symphony 3325 manual content summary: