Home » Binatone Manuals » Cordless Phones » Binatone iDECT L1i » Manual Viewer

Binatone iDECT L1i User Manual

Binatone iDECT L1i Manual

View all Binatone iDECT L1i manuals

Add to My Manuals
Save this manual to your list of manuals

Binatone iDECT L1i manual content summary:

Binatone iDECT L1i | User Manual - Page 1
USER GUIDE iDECT L1Li System Digital Cordless Telephone with 100 Name and Number Phonebook and Answering Machine (Argos) Ver TELEPHONE CALLS WHEN THE POWER FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE MADE FOR ACCESS TO DIAL EMERGENCY SERVICES. Before operating this set, please read these instructions
Binatone iDECT L1i | User Manual - Page 2
Table of Contents 1 IMPORTANT SAFETY INSTRUCTIONS 1 2 INSTALL YOUR PHONE ...3 2.1 CONNECT THE BASE STATION 3 2.2 IF YOU HAVE A BROADBAND LINE 4 2.3 INSTALL AND CHARGE THE BATTERIES 4 3 GET TO KNOW YOUR PHONE 5 3.1 OVERVIEW OF YOUR HANDSET ...5 3.2 HANDSET LCD DISPLAY ...6 3.3
Binatone iDECT L1i | User Manual - Page 3
...29 ANSWERING MACHINE SETTINGS 30 SET THE ANSWER MODE ...30 SET THE OUTGOING MESSAGE LANGUAGE 30 RECORD OUTGOING MESSAGE ...30 PLAYBACK & DELETE MESSAGE ...31 SET THE ANSWER DELAY ...31 SET THE MAXIMUM RECORDING TIME FOR MESSAGES 32 REMOTE ACCESS ...32 CALL SCREENING ...34 TROUBLESHOOTING 36
Binatone iDECT L1i | User Manual - Page 4
access to Emergency Services. (This means that you should also have a basic phone, that does iDECT system In the box are: ■ the cordless handset (up to four, depending on which DECT system you've bought) ■ the base unit ■ one battery pack and a battery compartment cover for each handset ■ a telephone
Binatone iDECT L1i | User Manual - Page 5
in performance. 7) NEVER use your DECT system outdoors during a thunderstorm, unplug the base from the telephone line and the mains socket when may cause damage to the batteries. 12) Please ensure the battery pack is plugged in the handset correctly. 13) Dispose of batteries safely. Do not immerse
Binatone iDECT L1i | User Manual - Page 6
numbers (REN) of all equipment (phones, fax machines, modems, etc.) connected to an exchange line must not add up to more than 4, otherwise one or more of them may not ring and/or answer calls correctly. The iDECT system has a REN of 1, and most other telephones have a REN of 1 unless marked
Binatone iDECT L1i | User Manual - Page 7
PHONE 2.1 Connect the Base Station 1) Plug the power supply and the line cord into the base station. 2) Plug the power adaptor into a 230Vac, 50HZ mains socket, and the line cord into your telephone handset batteries. NOTE: Do not install close to another telephone or other electrical equipment - this
Binatone iDECT L1i | User Manual - Page 8
problems. In a home with broadband, every telephone must have a microfilter connected, not just the one at the telephone point that your modem is connected to. If you need more broadband microfilters, contact your broadband supplier. 2.3 Install and Charge the Batteries RED 1) Slide the battery
Binatone iDECT L1i | User Manual - Page 9
3 GET TO KNOW YOUR PHONE 3.1 Overview Of Your Handset 1 LEFT SOFT KEY (Key editing/predialling mode: Press to move the cursor one character to the left. 3 Talk on Press to make or answer a call. 8 4 SPACE In editing/pre-dial mode: Press and hold to insert a diallingpause. During phonebook
Binatone iDECT L1i | User Manual - Page 10
of the phone operation. Icons answering machine is turned on. Flashes when the answering machine memory is full. You have a new Voice Mail message. (This is a caller id service and is not usually available from UK network providers.) Indicates that the keypad is locked. Indicates when the battery
Binatone iDECT L1i | User Manual - Page 11
and hold to delete all previously reviewed messages. SKIP FORWARD During message playback: press to skip to the next message. FIND Press to find all registered handsets. PLAY/ STOP Press to start and stop playing messages. ANSWER ON/OFF Press to switch the answering machine on/off. 3.4 Base Two
Binatone iDECT L1i | User Manual - Page 12
Main Menu CALL LIST PHONEBOOK CLOCK/ ALARM HS SETTINGS BASE SETTINGS REGISTRATION ANSWER MACHINE Sub menu Shows VIEW LIST EMPTY ADD or the first Call EDIT List Entry. Then DELETE press DELETE ALL and for: PB
Binatone iDECT L1i | User Manual - Page 13
4.2.2 Direct dialling Press or to take the line, then enter the phone number. ( Note: If you enter a wrong digit you can not correct it with [ , minutes and seconds (HH:MM:SS) on the display from when you answer a call or after dialling a number, until 5 seconds after the end
Binatone iDECT L1i | User Manual - Page 14
not on charge or Auto Answer (see 8.1.7) is turned off: When the phone rings, press / / [ Accept ] to answer a call. If the handset is on charge and Auto Answer (see 8.1.7) is set to On : When the phone rings, pick up the handset to answer a call automatically without having to
Binatone iDECT L1i | User Manual - Page 15
: In idle mode, press and hold key, the will disappear. Note: If the lock is on, you can still use to answer a call when a handset is ringing. 11
Binatone iDECT L1i | User Manual - Page 16
allows you to make internal calls, transfer external calls from one handset to another handset and make conference calls. If the called handset is not answered within 20 seconds, the ringing will stop and the calling handset will return to standby mode. Note: If only one handset is registered to the
Binatone iDECT L1i | User Manual - Page 17
4.11.3 Switch calls between an external call and an internal call During an external call: 1. Follow steps 1 to 3 in section 4.11.1 . 2. The external call is put on hold automatically and the called handset rings. 3. Press / / [Accept] on the called handset to establish an
Binatone iDECT L1i | User Manual - Page 18
handset can store up to 100 private phonebook entries with names and numbers. Each phonebook entry can have a maximum of 24 digits for the phone number and 12 characters for the name. You can also select different ringtones for your phonebook entries. (Note: the different ringtones only play when
Binatone iDECT L1i | User Manual - Page 19
. 4. Press to highlight your desired phonebook entry. 5. Press [ Select ] to view the details of the selected phonebook entry. Note: If the telephone number in the phonebook exceeds 16 digits, a ">" appears at the end of the number. Press to see more digits. When "
Binatone iDECT L1i | User Manual - Page 20
5.6 Copy Phonebook to Another Registered Handset You can copy the whole phonebook from one L1i handset to another L1i handset registered to the same base station. If the phonebook becomes full during copying, the display shows "Aborted " in the sending handset. If the receiving
Binatone iDECT L1i | User Manual - Page 21
if you have subscribed to the Caller Line Identification service with your telephone service provider. Your phone can store up to 30 answered or unanswered calls with date/time information in the call list. The number will be shown on the display when the phone is ringing. If the number matches with
Binatone iDECT L1i | User Manual - Page 22
6.3 Dial a Call List Number 1. Follow steps 1 and 2 in Section 6.1. 2. Press to dial out the call list number. 6.4 Delete an Entry in the Call List 1. Follow steps 1 and 2 in Section 6.1. 2. Press [ Menu ] and to scroll to Delete. 3. Press [ Select ] to confirm. 4. Press [OK] to
Binatone iDECT L1i | User Manual - Page 23
, the time and date settings will be automatically updated by the network when you receive a call. The Caller Display service only sends the month and date, not the year, so you may need to set the year. 7.1 Date & Time 7.1.1 Change date format In Idle: 1. Press [
Binatone iDECT L1i | User Manual - Page 24
and PM. 5. Press [ OK ] to confirm. 7.2 Alarm You can use the iDECT L1i handset as an alarm clock. When an alarm is set, the is shown will be no alarm tone. from the earpiece to alert the user the alarm time is reached. If the user presses a key to stop the alarm or activate the snooze,
Binatone iDECT L1i | User Manual - Page 25
7.2.2 Set and turn on the alarm In Idle mode: 1. Press [ Menu ] and to scroll to Clock/Alarm. 2. Press [ Select ] and to scroll to Alarm. 3. Press [ Select ] and to scroll to Alarm On. 4. Press [ Select ] and enter the alarm time using the digit keys. 5. Press [ OK ] to
Binatone iDECT L1i | User Manual - Page 26
comes with a selection of settings that you can change to personalise your phone operation. 8.1 Handset Settings 8.1.1 Set the internal ringer melody In Idle mode: 1. Press [ Menu ] and to scroll to HS Settings. 2. Press [ Select ] and
Binatone iDECT L1i | User Manual - Page 27
on by default, but can be turned off, if desired. Key tone- a single beep is emitted when you press a key. Battery Low - a tone is emitted while you are talking on the phone to alert you that you need to charge the batteries. Out Of Range - a tone is emitted while you are talking on the
Binatone iDECT L1i | User Manual - Page 28
DOWN> to scroll to HS Settings. 2. Press [ Select ] and to scroll to Auto Answer. 3. Press [ Select ] and to scroll to On or Off. 4. Press [ Select ] to confirm your Auto Answer setting. 8.1.8 Set handset display language You can change the language used on the handset display to
Binatone iDECT L1i | User Manual - Page 29
display. 8.2.2 Change the dial mode You should normally leave the dialling mode at the default setting of Tone (also called MF or DTMF) unless the phone is connected to an old exchange that only recognises Pulse dialling. Note: If Pulse dialling is set, you can press the * key to switch to
Binatone iDECT L1i | User Manual - Page 30
settings. After the reset, all your personal base setting will be defaulted, including the PIN code to 0000, and all the answering machine settings. Any answering machine messages will be deleted, but your phonebook, call list and redial list entries remain unchanged. 1. Press [ Menu ] and
Binatone iDECT L1i | User Manual - Page 31
IMPORTANT: If you purchase your phone all handsets are already registered to the base, so you do not need to register them. Handset registration is only necessary when you buy extra handsets or if a handset becomes faulty. Up to six handsets can be registered to a single base station, and a handset
Binatone iDECT L1i | User Manual - Page 32
MACHINE Your phone includes a telephone answering machine (TAM) that records unanswered calls when it is on. The answering machine can store up to 59 messages with a maximum total recording time of approximately 15 minutes. As well as recording incoming messages, you can record memos for other users
Binatone iDECT L1i | User Manual - Page 33
You can record a memo message for another user. When you record a memo, the message counter will increase by one and the message is played back in the same way as answering machine messages. Memo recording can still be done even when the answering machine is turned off. 1. Press [ Menu ] and
Binatone iDECT L1i | User Manual - Page 34
Only mode. When you record your own OGM, it will be used when the answering machine machine answers the call. 1. Press [ Menu ] and to scroll to Answer Machine. 2. Press [Select ] and to scroll to TAM Settings. 3. Press [Select ] and to scroll to OGM Settings. 4. Press
Binatone iDECT L1i | User Manual - Page 35
your OGM. You can set the answering machine to answer after two to nine rings or Time Saver. If Time Saver is selected, the answering machine will answer after 2 rings if there are new messages, and after 4 rings if there are no new messages. Then if you phone in to check your messages remotely
Binatone iDECT L1i | User Manual - Page 36
your choice. 9.5.7 Remote Access You can check your messages, or otherwise operate your answering machine, by calling the phone when you are away from home and entering a 4-digit remote access PIN using a tone-dialling phone. The 4-digit remote access PIN code is used to prevent other people from
Binatone iDECT L1i | User Manual - Page 37
to operate the answering machine remotely. L1i system Remote operation 1 Using a tone-dialling phone, dial your home number 2 While your outgoing message is playing, press 3 Key in your remote security code The default code is 0000. For details of how to set a new code, see the User Guide 9.5.7.1 on
Binatone iDECT L1i | User Manual - Page 38
Stopthe current PHVVDJHSOD\EDFN 6NLSWRSOD\WKHQH[WPHVVDJH Stop the current PHVVDJHSOD\EDFN Note: If your answering machine is switched off, the phone will answer after 14 rings You can then enter the * and the 4-digit remote access PIN (Default Remote Access PIN is 0000) to activate
Binatone iDECT L1i | User Manual - Page 39
leaving a message, from the handset or the base, and then decide whether to take the call in person. 9.5.8.1 Screening at the base By default, answering machine calls are played automatically through the base speaker and the volume can be adjusted with the Volume + and Volume - keys on the base. If
Binatone iDECT L1i | User Manual - Page 40
TROUBLESHOOTING Problem telephone line cord Check that the telephone cord has been plugged into the base station and the phone socket Service not activated or wrong setting Check your Subscription with network or change the dial mode. No display. Answering Machine Empty battery Recharge battery
Binatone iDECT L1i | User Manual - Page 41
be faulty. Disconnect the base unit from the telephone line and plug a different phone into the master telephone socket. If this works, the line is ok be on the exchange line, so please contact the service provider. This telephone is not equipped with a grounding function, and therefore some of
Binatone iDECT L1i | User Manual - Page 42
150mA, output 6VDC 450mA Caution Risk of explosion if battery is replaced by an incorrect type Dispose of used batteries according to the instructions. Technical details Standard Digital Enhanced Cordless Telecommunications (DECT) Frequency range Channel bandwidth Operating range Operating time
Binatone iDECT L1i | User Manual - Page 43
or other solvent chemicals - this may cause permanent damage which is not covered by the Guarantee. When necessary, clean it with a damp cloth. „ Keep your iDECT L1i away from hot, humid conditions or strong sunlight, and don't let it get wet. „ Every effort has been made to ensure high standards of
Binatone iDECT L1i | User Manual - Page 44
fault is due to misuse, abuse, use in contravention of the instructions, or where the product has been the subject of unauthorised modifications or alterations, or has been the subject of commercial use. In the event of a problem with the product within the guarantee period please return it to your
Binatone iDECT L1i | User Manual - Page 45
Binatone Telecom Plc, 1 Apsley Way London, NW2 7HF. Declare under our sole responsibility that the following product Type of equipment: Digital cordless telephone Model Name: iDECT L1i local authority. Notes for battery disposal Your product contains batteries covered by the European Directive