Biostar I86PE-A7 I86PE-A7 user's manual

Biostar I86PE-A7 Manual

Biostar I86PE-A7 manual content summary:

  • Biostar I86PE-A7 | I86PE-A7 user's manual - Page 1
    I86PE-A7 FCC Information and and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is approval in writing. The content of this user's manual is subject to be changed without notice and we will not be responsible for
  • Biostar I86PE-A7 | I86PE-A7 user's manual - Page 2
    Chapter 1: Introduction 1 1.1 I86PE-A7 Features 1 1.2 Package List 3 1.3 I86PE-A7 Layout 4 1.4 I86PE-A7 Components 5 Chapter 2: Hardware Chapter 4: Useful Help 14 4.1 Award BIOS Beep Code 14 4.2 Extra Information 14 4.3 Troubleshooting 16 Chapter 5: WarpSpeeder 17 5.1
  • Biostar I86PE-A7 | I86PE-A7 user's manual - Page 3
    I86PE-A7 Chapter 1: Introduction 1.1 I86PE-A7 FEATURES A. Hardware CPU Provides Socket 775. Supports Intel Pentium 4 processor up to 3.6GHz. Supports Intel Celeron D processor. Supports /512MB/1GB *1 Super I/O Chip: ITE IT8712F Provides the most commonly used legacy super I/O functionality. 1
  • Biostar I86PE-A7 | I86PE-A7 user's manual - Page 4
    I86PE-A7 Environment Control initiatives: ¾ H/W Monitor, ¾ Fan Speed Controller (optional), ¾ ITE "Smart Guardian" function. 10/100 LAN Chip: RTL8100C Supports 10/100Mb/s auto-negotiation operation. Half/Full duplex capability. Supports ACPI, PCI power management. Slot 5 x 32bit PCI bus master slots
  • Biostar I86PE-A7 | I86PE-A7 user's manual - Page 5
    functions. Software Supports 9th TouchTM, FlasherTM, WinFlasherTM, and WarpspeederTM. Offers the highest performance for Windows 98, Windows NT, Windows 2000, Windows ME, Windows XP, Red-Hat Linux, and UNIX series. 1.2 PACKAGE LIST FDD cable x1 HDD cable x1 User's Manual x1 Fully Setup Driver CD x1
  • Biostar I86PE-A7 | I86PE-A7 user's manual - Page 6
    I86PE-A7 1.3 I86PE-A7 LAYOUT JKBMS1 JATXPWR2 JUSB1 JCOM1 JKB_USBV1 1 LGA775 JCFAN1 1 Super I/O Intel 865PE AGP1 JCDIN1 1 Codec LAN PCI1 PCI2 PCI3 PCI4 PCI5 Note: represents the 1st pin. BAT1 BIOS Intel ICH5 JCI1 1 JCMOS1 1 JSATA1 JSATA2 1 1 7 7 IDE1 JDJ1 (optional) 1 1 JUSBV3_4
  • Biostar I86PE-A7 | I86PE-A7 user's manual - Page 7
    I86PE-A7 1.4 I86PE-A7 COMPONENTS A B LGA775 U Super I/O C T D E F G Codec Intel 865PE S R BAT1 Intel Q ICH5 P BIOS O H N LAN M L I J K A. JATXPWR1/2: ATX power source L. JPANEL1: Front panel facilities headers. header. B. JKB_USBV1: Power source header for M. FDD1: Floppy
  • Biostar I86PE-A7 | I86PE-A7 user's manual - Page 8
    I86PE-A7 Chapter 2: Hardware Installation 2.1 CENTRAL PROCESSING UNIT (CPU) Special Notice: Remove Pin Cap before installation, and make good preservation for future use. When the CPU is
  • Biostar I86PE-A7 | I86PE-A7 user's manual - Page 9
    Step 2-2: I86PE-A7 Step 3: Hold the CPU down firmly, and then close the lever to complete the installation. Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU FAN power cable to the JCFAN1. This completes the installation. 2.2 FAN HEADERS These fan headers support cooling-fans
  • Biostar I86PE-A7 | I86PE-A7 user's manual - Page 10
    I86PE-A7 2.3 1. MEMORY MODULE INSTALLATION Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot. 2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the
  • Biostar I86PE-A7 | I86PE-A7 user's manual - Page 11
    I86PE-A7 2.4 CONNECTORS AND SLOTS AGP1: Accelerated Graphics Port Slot Your monitor will attach directly to that video card. This motherboard supports video cards for PCI slots, but it is also equipped with an Accelerated Graphics Port (AGP). An AGP card will take advantage of AGP technology
  • Biostar I86PE-A7 | I86PE-A7 user's manual - Page 12
    I86PE-A7 Chapter 3: Headers & Jumpers Setup 3.1 HOW TO SETUP JUMPERS The illustration +5V standby voltage. JUSBV3_4: JUSB2/3 are powered by +5V standby voltage. Note: In order to support this function "Power-on system via keyboard and mouse", "JUSBV1/JUSBV2/JUSBV3_4" jumper cap should be placed
  • Biostar I86PE-A7 | I86PE-A7 user's manual - Page 13
    I86PE-A7 JSPDIF_OUT1 (optional)/JSPDIF_IN1 (optional): Digital Audio out/in Connectors This /Rear speaker Left 14 Left line in/Rear speaker Left JUSB2/JUSB3: Front USB Ports Headers This motherboard provides 2 USB 2.0 headers, which allows user to connect additional USB cable on the PC front
  • Biostar I86PE-A7 | I86PE-A7 user's manual - Page 14
    I86PE-A7 JDJ1 (optional): AUDIO DJ Header Pin Assignment 5 1 1 SMBDATA JDJ1 3 INT_B 5 AXT_PWROK Pin Assignment 2 SMBCLK 4 Key JPANEL1: Front Panel Header This 24-pin connector includes Power-
  • Biostar I86PE-A7 | I86PE-A7 user's manual - Page 15
    I86PE-A7 JCMOS1: Clear CMOS Header By placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data, please carefully follow the procedures to avoid damaging the motherboard. JCMOS1 Assignment Pin 1-2 close Normal Operation (Default). Pin 2-3 close Clear
  • Biostar I86PE-A7 | I86PE-A7 user's manual - Page 16
    I86PE-A7 Chapter 4: Useful Help 4.1 AWARD BIOS BEEP CODE Beep Sound One long beep followed by BIOS: 1. Make a bootable floppy disk. 2. Download the Flash Utility "AWDFLASH.exe" from the Biostar website: www.biostar.com.tw 3. Confirm motherboard model and download the respectively BIOS from Biostar
  • Biostar I86PE-A7 | I86PE-A7 user's manual - Page 17
    I86PE-A7 B. CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again.
  • Biostar I86PE-A7 | I86PE-A7 user's manual - Page 18
    I86PE-A7 4.3 TROUBLESHOOTING Probable Solution 1. No power to the system at all 1. Make sure power cable is Power light don't illuminate, fan securely plugged in. inside power supply does not turn 2. Replace cable. on. 3. Contact technical support "CMOS Failure." Review system's equipment.
  • Biostar I86PE-A7 | I86PE-A7 user's manual - Page 19
    I86PE-A7 in the About panel, you can get detail descriptions about BIOS model and chipsets. In addition, the frequency status of CPU Support: Windows 98 SE, Windows Me, Windows 2000, Windows XP DirectX: DirectX 8.1 or above. (The Windows XP operating system includes DirectX 8.1. If you use Windows XP
  • Biostar I86PE-A7 | I86PE-A7 user's manual - Page 20
    I86PE-A7 5.3 INSTALLATION 1. Execute the setup execution file, and then the following dialog will pop up. Please click "Next" button "Finish" button. Usage: The following figures are just only for reference, the screen printed in this user manual will change according to your motherboard on hand. 18
  • Biostar I86PE-A7 | I86PE-A7 user's manual - Page 21
    I86PE-A7 5.4 [WARPSPEEDER™] INCLUDES 1 TRAY ICON AND 5 PANELS 1. Tray Icon: Whenever the Tray Icon utility is launched, it will display a little tray icon on the right side
  • Biostar I86PE-A7 | I86PE-A7 user's manual - Page 22
    I86PE-A7 2. Main Panel If you click the tray icon, [WarpSpeeder™] utility will be invoked. Please refer to the following figure; the utility's first window you will
  • Biostar I86PE-A7 | I86PE-A7 user's manual - Page 23
    I86PE-A7 3. Voltage Panel Click the Voltage button in Main Panel, the button will be highlighted and the Voltage Panel will slide out to up as the
  • Biostar I86PE-A7 | I86PE-A7 user's manual - Page 24
    I86PE-A7 4. Overclock Panel Click the Overclock button in Main Panel, the button and "+3MHz button": provide user the ability to do real-time overclock adjustment. Warning: Manually overclock is potentially dangerous, especially when the overclocking percentage is over 110 %. We strongly recommend
  • Biostar I86PE-A7 | I86PE-A7 user's manual - Page 25
    I86PE-A7 c. "Auto-overclock button": User can click this button and [WarpSpeeder™] will set the best and stable performance and frequency automatically. [WarpSpeeder™] utility will execute a series
  • Biostar I86PE-A7 | I86PE-A7 user's manual - Page 26
    I86PE-A7 6. About Panel Click the "about" button in Main Panel, the button will be highlighted and the About Panel will detail information in hints of all the chipset that are related to overclocking. You can also get the mainboard's BIOS model and the Version number of [WarpSpeeder™] utility. 24
  • Biostar I86PE-A7 | I86PE-A7 user's manual - Page 27
    I86PE-A7 Note: Because the overclock, overvoltage, and hardware monitor features are controlled by several separate chipset, [WarpSpeeder™] divide these features to separate panels. If one chipset
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27

I86PE-A7
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here of and specially disclaims any implied
warranties
of
merchantability or fitness for any purpose. Further the vendor reserves the
right to revise this publication and to make changes to the contents here of
without obligation to notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.
i