Biostar IDEQ 200N iDEQ 200N BIOS setup guide

Biostar IDEQ 200N Manual

Get Biostar IDEQ 200N PDF manuals and user guides View all Biostar IDEQ 200N manuals
Add to My Manuals
Save this manual to your list of manuals

Biostar IDEQ 200N manual content summary:

  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 1
    M7NBA BIOS Setup BIOS Setup 1 1 Main Menu...3 2 Standard CMOS Features 6 3 Advanced BIOS Features 9 4 Advanced Chipset Features 12 5 Integrated Peripherals 16 6 Power Management Setup 21 7 PnP/PCI Configurations 24 8 PC Health Status 26 9 Frequency Control 28 i
  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 2
    this manual is intended to guide you through the process of configuring your system using Setup. Plug and Play Support These AWARD BIOS supports the Plug and Play Version 1.0A specification. ESCD (Extended System Configuration Data) write is supported. EPA Green PC Support This AWARD BIOS supports
  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 3
    M7NBA BIOS Setup PCI Bus Support This AWARD BIOS also supports Version 2.1 of the Intel PCI (Peripheral Component Interconnect) local bus specification. DRAM Support DDR SDRAM (Double Data Rate Synchronous DRAM) are supported. Supported CPUs This AWARD BIOS supports the AMD® CPU into CMOS Status
  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 4
    M7NBA BIOS Setup 1 Main Menu Once you enter Award BIOS™ CMOS Setup Utility, the Main Menu will appear on the BIOS defaults on manual (Figure 1,2,3,4,5,6,7,8,9) is just for reference, please refer to the BIOS installed on board, for update information. Figure 1. Main Menu Standard CMOS Features
  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 5
    M7NBA BIOS Setup Input/ Output features. Power Management Setup This submenu allows you to configure the power management features. PnP/PCI may cause CPU or M/B damage!) Load Optimized Defaults This selection allows you to reload the BIOS when the system is having problems particularly with
  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 6
    M7NBA BIOS Setup Set User Password If the Supervisor Password is not set, then but will not be able to change them. Save & Exit Setup Save all configuration changes to CMOS(memory) and exit setup. Confirmation message will be displayed before proceeding. Exit Without Saving Abandon all changes made
  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 7
    M7NBA BIOS Setup 2 Standard CMOS Features The items in Standard CMOS Setup Menu are divided into 10 categories. Each category includes no, one or more than one setup items. Use the arrow keys to highlight the
  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 8
    M7NBA BIOS Setup Main Menu Selections This table shows the selections that you can make on the Main Menu. Item Options Description Date mm : dd : yy Set the system date. Note that the 'Day' automatically changes when you set the date. Time hh : mm : ss Set the system internal clock. IDE
  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 9
    M7NBA BIOS Setup Item Halt On Base Memory Extended Memory Total Memory Options All Errors No Errors All, but Keyboard All, but Diskette All, but Disk/ Key N/A N/A N/A Description Select the situation in which you want the BIOS to stop the POST process and notify you. Displays the amount of
  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 10
    M7NBA BIOS Setup 3 Advanced BIOS Features Figure 3. Advanced BIOS Setup Boot Seq & Floppy Setup First/ Second/ Third/ Boot Other Device These BIOS attempt to load the operating system from the device in the sequence selected in these items. The Choices: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD
  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 11
    M7NBA BIOS Setup Cache Setup External Cache This option you to enable or disable "Level 2" secondary cache on the CPU, BIOS will display a warning message on the screen and sound an alarm beep. Disabled (default) Virus protection is disabled. Enabled Virus protection is activated. Quick Power
  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 12
    multiprocessor specification. Select version supported by the operation system running on this computer. The Choices: 1.4 (default), 1.1. OS Select For DRAM > 64MB A choice other than Non-OS2 is only used for OS2 systems with memory exceeding 64MB. The Choices: Non-OS2 (default), OS2. Video BIOS
  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 13
    M7NBA BIOS Setup 4 Advanced Chipset Features This submenu allows you to configure the specific features of the chipset installed on your system. This chipset manage bus speeds and access to system memory customization of performance CPU Clock Ratio This item allows you to select the CPU Ratio. The
  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 14
    M7NBA BIOS Setup CPU Interface Optimal (Default) This item allows you to use the most stable CPU/ FSB parameters. Aggressive This item allows you to use overclocked CPU/ FSB parameters. Memory Frequency Select "Auto" for best performance. The Choices: By SPD (Default), 50%, 60%, 66%, 75%, 80%, 83%,
  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 15
    CPU Thermal Throttling. The Choices: 50% (Default), Disabled, 87.5%, 75%, 62.5%, 37.5%, 25%, 12.5%. System BIOS Cacheable Selecting Enabled allows you caching of the system BIOS ROM at F0000h~FFFFFh, resulting a better system performance. However, if any program writes to this memory area, a system
  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 16
    M7NBA BIOS Setup Video RAM Cacheable Enabling this option allows caching of the video RAM, resulting a better system performance. However, if any program writes to this memory area, a system error may result. The Choices: Disabled (default), Enabled. 15
  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 17
    M7NBA BIOS Setup 5 Integrated Peripherals Figure 5. Integrated Peripherals IDE Function Setup The chipset contains a PCI IDE interface with support for following options: OnChip IDE Channel 0/1 The motherboard chipset contains a PCI IDE interface with support for two IDE channels. Select "Enabled"
  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 18
    M7NBA BIOS Setup IDE Primary / Secondary Master / Slave UDMA Ultra DMA/100 functionality can be implemented if it is supported by the IDE hard drives in your system. As well, your operating environment requires a DMA driver (Windows 95 OSR2 or a third party IDE bus master driver). If your hard drive
  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 19
    M7NBA BIOS Setup Init Display First This item allows you to decide to active whether PCI Slot or on-chip VGA first. The Choices: Onboard/AGP, PCI Solt (default). OnChip USB This item allows you to set the onchip USB. The Choices: V1.1+V2.0 (default), Disabled, V1.1. USB Keyboard Support The
  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 20
    M7NBA BIOS Setup chip. The Choices: Normal, ASKIR, IrDA (default). RxD, TxD Active This item allows you to determine which Infrared (IR) function of onboard I/O chip. The
  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 21
    M7NBA BIOS Setup The Choices: 201 (default), 209, Disabled. Midi Port Address Midi Port Base I/O Address. The Choices: 330 (default), 300, 290, Disabled. Midi Port IRQ This determines the IRQ in which the Midi Port can use. The Choices: 10 (default), 5 20
  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 22
    M7NBA BIOS Setup 6 Power Management Setup The Power Management Setup Menu allows you to configure your system to utilize energy conservation and power up/power down features. Figure 6. Power Management Setup ACPI function This item displays the status of the Advanced Configuration and Power
  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 23
    M7NBA BIOS Setup There are four options of Power Management, three of which have fixed mode settings Min. Power Saving Minimum power management. Suspend Mode = 1 hr. HDD Power Down = 15 min Max. Power Saving Maximum power management only available for sl CPU's. Suspend Mode = 1 min. HDD Power Down =
  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 24
    a system that had lost power previously without any subsequent manual intervention. There are 3 sources that provide current to the CMOS area that retains these Power-On instructions; the motherboard battery (3V), the Power Supply (5VSB), and the Power Supply (3.3V). While AC is not supplying power
  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 25
    node records which resources are assigned to it. The system needs to record and update ESCD to the memory locations. These locations (4K) are reserved in the system BIOS. If the Disabled (default) option is chosen, the system's ESCD will update only when the new configuration varies from the last
  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 26
    : Disabled (default), Enabled. Resources Controlled By By Choosing "Auto(ESCD)" (default), the system BIOS will detect the system resources and automatically assign the relative IRQ and DMA channel for each peripheral.By Choosing "Manual", the user will need to assign IRQ & DMA for add-on cards. Be
  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 27
    M7NBA BIOS Setup 8 PC Health Status Figure 8. PC Health Status Current CPU Temperature Show you the current CPU temperature. Current JCFAN1 Speed This field displays the current CPUFAN1 speed. Current SYSFAN Speed This field displays the current SYSFAN speed. Current JCFAN2 Speed This
  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 28
    M7NBA BIOS Setup Show H/W Monitor in POST If you computer contain a monitoring system, it will show PC health status during POST stage. The item offers several delay time to select you want. The Choices: Enabled (default), Disabled. 27
  • Biostar IDEQ 200N | iDEQ 200N BIOS setup guide - Page 29
    M7NBA BIOS Setup 9 Frequency Control Figure 9. Frequency Control CPU Voltage Regulator This item allows you to select CPU Voltage Regulator. The Choices: Default (default), -0.025V, -0.050V, -0.075V, -0.100V, +0.025V, +0.050V, +0.075V. AGP Voltage Regulator This item allows you to select AGP Voltage
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
M7NBA BIOS Setup
i
BIOS Setup
.......................................................................................
1
1 Main Menu
....................................................................................................
3
2 Standard CMOS Features
..............................................................................
6
3 Advanced BIOS Features
..............................................................................
9
4 Advanced Chipset Features
.........................................................................
12
5 Integrated Peripherals
.................................................................................
16
6 Power Management Setup
...........................................................................
21
7 PnP/PCI Configurations
..............................................................................
24
8 PC Health Status
.........................................................................................
26
9 Frequency Control
.......................................................................................
28