Biostar IDEQ 220K MOTHER BOARD MANUAL

Biostar IDEQ 220K Manual

Get Biostar IDEQ 220K PDF manuals and user guides View all Biostar IDEQ 220K manuals
Add to My Manuals
Save this manual to your list of manuals

Biostar IDEQ 220K manual content summary:

  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 1
    Mini PC System
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 2
    this equipment. This equipment generates, uses, and radiates radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 3
    the manufacturer or its affiliated companies. Copyright Notice No part of this manual may be reproduced or transmitted in any form or by any means, electronic and company names mentioned herein may be trademarks and/or service marks of their respective owners. Intel and Pentium are registered
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 4
    Information 1.Please read these safety instructions carefully. 2.Please keep this User's Manual for later reference. 3.Please disconnect THE OPENINGS. 9.Make sure the voltage of the power source when connect the equipment to the power outlet. 10.Place the power cord such a way that people can not
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 5
    following situations arises, get the equipment checked by service personnel: a. The Power cord or plug is damaged. b. Liquid has user's manual. e. The equipment has dropped and damaged. f. If the equipment has obvious sign of breakage. 15.CAUTION: THE COMPUTER IS PROVIDED WITH A BATTERY-POWERED REAL
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 6
    Devices 21 Section 4 Software and Utilities 4.1 Installing Drivers and Utilities 30 Section 5 Trouble Shooting 5.1 System Does Not Start 32 5.2 Keyboard and Mouse Problems 33 5.3 USB Devices Problems 34 5.4 Software Problems 35 Section 6 Taking Care of Your Computer 6.1 General
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 7
    Section 1 Introductio
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 8
    step installation guide of the manual, you will find that it is a simple process to set up CPU, memory and hard is one AGP and one PCI slots that allow power users to add on the high-end audio and this user's guide including the clear and concise installation guide, trouble-shooting procedure and
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 9
    package and check the following items. If there are any of the equipments are missing or damaged, contact your dealer immediately. Small Form Factor System c) Driver CD A power cord MANUAL User's manual 4 Screws Pack Installation Guide My Thermal Grease Serial-ATA Cable 3
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 10
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 11
    Section 2 Mainboard Set Up
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 12
    for Hyper Transport link. Chipset • Northbridge: VIAK8M800. • Southbridge: VIAW8237R. Dimensions • Mini-PCFormFactor: 19,2cm(NI)x 30.8cm(L) Memory • Supports 26613331400MHzDDRdevices. • Certified DDR400+ List • - Please check the website: hffp:11www.biostar.com.tvelproductsImainboardlboard.php3?name
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 13
    Mills On Board AC'97 Sound Codec • Chip: ALC655 • Complaints with AC'97 Version 2.3 specification. • SupportsSPDIF-outandSPDIF-in. • Supports 6 channels. IEEE 1394A Chip • Chip:VIAVT6307. • Support 2 ports with transfer up to 400Mbls. Front Side On-board Peripherals • 2USB2.0headerssupport 4 USB2
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 14
    Rear Side (Back Panel) I/0 Connectors • 1 vertical audio port including 1 line-in connector, 1 line-out connector, and 1 MIC-in connector. • 1 PSI2mouse & keyboard port. • 1 SIPDIF-out connector, • 1RJ-45 LANlack. • 1 IEEE1394 port. • 1 serial port. • 1 VGA port • 2 USB2.0 ports. JKBMS1 JAUDIO •
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 15
    2 Chapter 2 BIOS & Software BIOS • Award legal BIOS • Supports APM1.2, ACPI, USB Function Software • Supports Warpspeeder" 9th Touch', Flasher', WinFlasher". • Offers the highestperformanceforWindows 98SE,Windows 2000,Windows Me, Windows XP, SCOUNIXetc, 9
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 16
    2.2r layout And Components Index LAN JSFAN1 JUSBV2 JATXPWR2 00 JATXPWERI OO OO OO OO OO OO OO DOI O O1O1 O1O1 JCOMII JKBMSV1 SPDIFO1 Codec p. JCDINI K8M800 JCFANI • 00 IEEE 1394 Chip JSATA1 100.11 J1394PWR IDE1 JUSB2 oggg: JUSB1 og gg,7, JUSBV3 Super I/O IT 8705 JCMOSI JPRNTI
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 17
    :System fan header, C. PCI1: PeripheralComponentInterconnectslot. D.AGPI: AcceleratedGraphicsPorf slot. E.JAIXPVIR1IJAD(P1NR2A: IXpower sourceconnectors. P.J1394K9R: Power sourceheaderfor 1394 ports. G.IDEVIDE2: On-boardDiskconnectors. R.SATAI/SATA2:On-boardserialAlA connectors. I. FDD1: Floppy disk
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 18
    supports video cards for PCI slots, but it is also equipped with an Accelerated Graphics Port (AGP). An AGP card will take advantage of AGP technology for improved video efficiency and performance, especially with 3D graphics. • Serial ATA Connector: JSATA1/JSATA2 The motherboard has a PCI to SATA
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 19
    74 1 JSATA1/JSATA2 Pin Assignment 1 Ground 3 TX- 5 RX - 7 Ground • CPU Fan Header: JCFAN1 Pin 3 0 0 1 1 • 2 JCFAN1 3 • North Bridge Assignment 2 TX + 4 Ground 6 RX + Assignment Ground FAN Power Control FAN RPM Rate Sense Assignment Ground +12V NA Assignment Ground FAN
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 20
    • AIXPower Connectors: JAIXPVVR/1PATXPWR2 JATXPWR1:thisconnectorallows usertoconnect 20-pin power connector ontheAllpower suppry, JATXPWR2:Byconnecting thisconnector,itwillprovide +12Vto CPUpower circuit, 10 20 DO DU OD OD DU DO OD 1 IQ 11 JATXPWR1 Pin Assignment Pin 1 +3.
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 21
    :+5V for USBports at JUSBLAN.1 JUSBV3:+5Vfor JUSB1-2. • 1 OO 3 Pin 2-3 close +5V Standby Voltage JUSBV1:JUSB3-4 are powered by standby voltage of +5V JUSBV2:JUSB1ANills powered by standby voltage of +5V JUSBV3:JUSB1-2 arepowered by standby voltage of +5V Note: Inordertosupportthisfunction
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 22
    19 NA 21 +5V 23 IRTX Function Pin Assignment 2 Sleep Control Speaker 4 Ground Connector 6 NA 8 Power LED (+) Hard Drive 10 Power LED (+) LED 12 Power LED (-) Reset 14 Power Button Button 16 Ground 18 KEY IrDA 20 KEY Connector 22 Ground 24 IRRX Function Sleep
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 23
    motherboard, JCMOS1 Assignment 1 3 • 0 0 Pin 1-2 close Normal Operation (default) L 1 3 • OO Pin 2-3 close *Clear CMOS Procedures: Remove AC power Close". Wait for five seconds. Set the jumper to "Pin 1-2 Close". Power on the AC. Reset your desired password or clear the CMOS data. Clear
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 24
    • Power Source Header for 1394: J1394PWR 1• 00 3 Pin 1-2 close • 00 3 Pin 2-3 close Assignment 4311B Description +3.3V for IEEEI394 chipset (Default) +3.3VSBforIEEE1394 chipset. Front USBHeader: JUSB1IJUSB2 Thisconnector allows user toconnectadditional USBcablesonthePCfrontpanel. Alsocan be
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 25
    Section 3 Peripheral Connections
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 26
    3.1,Overview Your computer offers the following connectors for peripheral devices. As these devices are provided by third-parties, be sure that they function correctly when connected to your computer before you purchase them. Front Panel Connectors : a 6, SPDIF Input Headphone 0 1 _ _I -.0 O.-
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 27
    off the computer and the peripheral device. • Read the instructions on the manual or guide provided by the device manufacturer carefully. • Insert the connector that comes from the device manufacturer to the proper I/O port. • Install the drivers or other software that's required by the device so
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 28
    Connecting monitor To connect a monitor, plug the monitor cable into the VGA port located on the rear panel of your computer. a L (if 0 0 O 000 0 1 Figure 3.3 Connecting mouse and keyboard Most of mouse and keyboard are PS/2 compliant. However, lots of the latest keyboard and mouse use the USB
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 29
    does not have the driver for your device, install the driver from the driver CD that is provided by the device manufacturer. ( 0 0 0 o no O OO00 O Digital camera •.• PDA Scanner Figure 3.5 Note: The USB devices support "hot plugging," eliminating the need to power down or restart the computer
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 30
    more. The IEEE 1394 devices also support "hot plugging", eliminating the need to power down or restart the computer when running and automatically install the driver for the device. • If the OS does not have the driver for your device, install the driver from the driver CD that is provided by
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 31
    3 Chapter 3 SPDIF (Sony/Philips Digital Interface) jack: SPDIF is a standard audio transfer file format, which provides digital audio instead of analog audio through optical fiber. MD 0 Oil0 0 0= Figure 3.7 • "Headphone" jack: Use this jack to connect stereo headphone or amplified speakers to your
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 32
    CD or diskette that is provided by the printer manufacturer. (' Note: To install the printer driver, please refer to the guide your printer manufacturer provides for you. Connecting LAN You can connect your computer with another computer system or get on broadband Internet connection by using
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 33
    Section 4 Software Utility
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 34
    ) and the Installation Utility will auto run or you can launch the Driver CD Installation Utility manually. IV:I/ • icrolirdows Me Version 1.3810 _00B-IR Dliver Soilmare and Muddle Utility Use, Manual Browse EXIT Figure 4.1 There are two kinds of Installation Procedure: Automatically install
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 35
    exe file to run the utility manually. 5. Use the mouse cursor to click the Driver option on the page. 6. Driver setup utility will search for instructions to finish the installation. 11. Click on the next driver you want to install. 12. Repeat steps 8 to 10 until you have installed all the drivers
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 36
    2. Click on the software you want to install. 3. The installation utility will start the installation wizard for the software you choose. 4. Follow the instruction steps of the wizard. 5. Repeat steps 2 to 4 if you want to install more. 6. When you are done, simply close the Installation Utility. 30
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 37
    $
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 38
    of the computer. If available, try a different monitor, or try the monitor on a different VGA-compatible computer. 3. If the monitor is powered on and known to be working, there may be a problem with the computer Main circuit board. Contact your computer dealer for technical support and service. 32
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 39
    when you start the computer. 2. If you inadvertently start the system with the keyboard disconnected, shut down the system by pressing and holding the power button on the system unit for at least four seconds. . Keyboard doesn't take input; mouse pointer does not move: 1. Make sure the mouse plug is
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 40
    the driver for your USB device. 2. Then plug in your USB device. USB device works when first plugged in, but does not work after system is woken from Standby mode: 1. Force the device to configure by unplugging and then plugging it back in. 2. Use a complete shutdown (hold the power button for
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 41
    last resort, if the computer totally ignores the mouse, keyboard and power button, you can unplug the power cable; wait a moment; and then plug the power cable back in. This forces the computer to restart. 6. If the problem persists, contact your computer dealer for technical support and service. 35
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 42
    36
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 43
    Section 6 Taking care of Your Computer 40' 4
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 44
    O.i ,Gfleial Maintenance Before you install any computer component, we recommend that you read the following instructions. • Electrostatic discharge can damage the components of your computer. Do not remove a component from its protective packaging until you are ready to install it. • Avoid
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 45
    all cautions and follow the instructions that may be marked on the computer. • Except as described elsewhere in this manual, refer all servicing to qualified personnel. Immediately shut off the computer and refer for servicing under the following conditions: 1. When the power cord or plug is damaged
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 46
    40
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 47
    Appendix Installing Mainboard i
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 48
    A.1( Installing Mainboard Before installing mainboard, users have to remove the two-side and top cover panels. Then remove the front cover panel for inserting the mainboard into the chassis. Removing The Front Cover Panel There are four quick joints on the reverse side of front panel bezel as figure
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 49
    A Appendix Then use the screwdriver to remove the two screws on the top of front cover panel. Installing Mainboard • Insert the mainboard from the side into the base of the chassis and place it close to the Back panel. Figure A.4 After fixing the mainboard on the base of the chassis, you will
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 50
    - Connect the cable of LEDs indicator and frontpanel switches to "JPANELl" connector on the Mainboard. • Connect the cable of system fon t0 "JSFAN1" connector on the mainboard. Connect the cable to the floppy, CD-ROM and HDD. • Place the CD-ROM bracket and fix it with 2 screws. 44 Figure A.7 Figure
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 51
    Place HDD bracket. Fix it with one screw. Figure A.11 Figure A.12 Completing The Installation Place the front panel back and fix it with four screws to complete the installation of mainboard. ...P,..,'L;-- IE [ / Figure A.13 Note: The figures show the locations of connectors on P4SBA mainboard
  • Biostar IDEQ 220K | MOTHER BOARD MANUAL - Page 52
    50-iDEQ220K-M-E1 Specifications and product offerings subject to change without notice. Product may not be exactly as photo shown. All brand names and trademarks are registered property of their respective owners.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
Mini
PC
System
• • •,•,,.