Biostar IDEQ N1 MANUAL
Biostar IDEQ N1 Manual
 |
View all Biostar IDEQ N1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Biostar IDEQ N1 manual content summary:
- Biostar IDEQ N1 | MANUAL - Page 1
Mini PC System User's Manuel MI - Biostar IDEQ N1 | MANUAL - Page 2
changes or modification made to this equipment void the user's authority to operate this equipment. This equipment generates, uses, and radiates radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However - Biostar IDEQ N1 | MANUAL - Page 3
software or equipment that is not supplied by the manufacturer or its affiliated companies. Copyright Notice No part of this manual may be reproduced or transmitted and company names mentioned herein may be trademarks and/or service marks of their respective owners. Intel and Pentium are registered - Biostar IDEQ N1 | MANUAL - Page 4
these safety instructions carefully. 2.Please keep this User's Manual for later reference. 3.Please disconnect this equipment from AC outlet before cleaning. Don't use liquid or sprayed detergent for cleaning. Use moisture sheet or clothe for cleaning. 4.For pluggable equipment, the socket-outlet - Biostar IDEQ N1 | MANUAL - Page 5
, get the equipment checked by service personnel: a. The Power cord or plug is damaged. b. Liquid has penetrated into the equipment. c. The equipment has been exposed to moisture. d. The equipment has not worked well or you can not get it work according to user's manual. e. The equipment has dropped - Biostar IDEQ N1 | MANUAL - Page 6
Devices 29 Section 4 Software and Utilities 4.1 Installing Drivers and Utilities 36 Section 5 Trouble Shooting 5.1 System Does Not Start 40 5.2 Keyboard and Mouse Problems 41 5.3 USB Devices Problems 42 5.4 Software Problems 43 Section 6 Taking Care of Your Computer 6.1 General - Biostar IDEQ N1 | MANUAL - Page 7
Section 1 Introductio - Biostar IDEQ N1 | MANUAL - Page 8
-end audio and video cards. Users can enjoy a richer gaming experience and enhanced sound quality with built-in graphics engine and SPDIF jack. To help you familiarize with your computer, we provide this user's guide including the clear and concise installation guide, trouble-shooting procedure and - Biostar IDEQ N1 | MANUAL - Page 9
package and check the following items. If there are any of the equipments are missing or damaged, contact your dealer immediately. Small Form Factor System c) Driver CD A power cord MANUAL User's manual 4 Screws Pack Installation Guide My Thermal Grease 3 - Biostar IDEQ N1 | MANUAL - Page 10
- Biostar IDEQ N1 | MANUAL - Page 11
Section 2 Mainboard Set Up - Biostar IDEQ N1 | MANUAL - Page 12
2.1 Mainboard Feature_ Model NC51G-S7 CPU I Supports Socket 754. ■ Supports AMD Athlon 64 processor up to 3700+. ■ Supports AMD Sempron processor. ■ Supports HyperTransport Technology up to 2GHz. ! Supports AMD CoolnQuiet Technology. Chipset I North Bridge: nVIDIA GeForce 6100. I South Bridge: - Biostar IDEQ N1 | MANUAL - Page 13
up to two DDR 333/400 devices. Supports non-ECC memory only. Registered DIMMs not supported. Maximum memory capacity is up to 2GB. (Following table is only for reference.) DIMM Socket Location DIMM1 DIMM2 DDR Module Total Memory Size 128MB/256MB/512MB/1GB *1 128MB/256MB/512MB/1GB *1 Max - Biostar IDEQ N1 | MANUAL - Page 14
2 FDD with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes. 1 USB headers support 2 USB 2.0 ports. (1 USB header for optional) 2 IDE connectors support 4 devices. 2 Serial ATA II connectors support 2 SATA II devices. Front Panel I/O Connectors 1 IEEE1394 Firewire port. (optional) 1 S/PDIF-in port. (optional - Biostar IDEQ N1 | MANUAL - Page 15
2 Chapter 2 Back Panel I/O Connectors • 2 USB 2.0 ports. • 1 VGA port. • 1 Serial port. • 1 RJ-45 LAN jack. • 1 PS/2 Mouse port. • 1 PS/2 Keyboard port • 1 S/PDIF-out port. (optional) • 1 IEEE1394 Firewire port. (optional) • 1 Vertical audio port including 1 - Biostar IDEQ N1 | MANUAL - Page 16
) CODEC JSFAN1I. I JUSBV1 NM- JATXPWR2 00 00 JCDIN1 JATXPWR1 •• = o. A J1394PWR1 II (optional) IEEE 1394 Chip (optional) GeForce 6100 JCFAN1 " • BIOS Super I/O JUSB1 JUSB3 (optional) JUSB2 ID El nForce 410 JSATA2 JSATAI BAT1 7 '0' JPRNTI JCMO5) jal (aPtla al) Note: • FDD1 - Biostar IDEQ N1 | MANUAL - Page 17
PROCESSING UNIT (CPU) fle • „, *kgkli ate• 00 o Step 1: Pull the lever toward direction A from the socket and then raise the lever up to a 90-degree angle. scr Step 2: Look for the triangle cut edge on socket, and the gold dot on CPU should point forwards this triangle cut edge. The CPU will - Biostar IDEQ N1 | MANUAL - Page 18
CPU Fan and heatsink assembly on the CPU and buckle it on the retention frame. Connect the CPU FAN power cable into the JCFAN1. This completes the installation. FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan - Biostar IDEQ N1 | MANUAL - Page 19
2.3 INSTALLINGSYSTEMMEMORY n 2 Chapter 2 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot. r 2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and - Biostar IDEQ N1 | MANUAL - Page 20
360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the provided floppy drive ribbon cables. • ... ... I p 34 FDD1 33 IDEVIDE2: Hard Disk Connectors The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO Mode 0-4, Bus Master, and Ultra DMA - Biostar IDEQ N1 | MANUAL - Page 21
PCI1: Peripheral Component Interconnect Slot This motherboard is equipped with 1 standard PCI slot. PCI stands for Peripheral Component Interconnect, and it is a bus standard for expansion cards. This PCI slot is designated as 32 bits. I= IA R_,r„z CI 0.- I o PCI1 PCI-EX1: PCI-Express x16 - Biostar IDEQ N1 | MANUAL - Page 22
is Ibpen Pin opened Pin closed Pin1-2 closed DETAIL SETTINGS JUSBV1: Power Source Headers for PS/2 Keyboard and Mouse and USB Ports Pin JKBMS1. Pin 2-3 Close: USB ports at JUSBLANI and PS/2 keyboard and mouse ports are powered by +5V or +5V standby voltage. 1 1= 1L-IELL • 0 0 JUSBV1 1 3 - Biostar IDEQ N1 | MANUAL - Page 23
powered by +5V or +5V standby voltage. 0 3 0 3 ■oo ti ■ 0 JUSBV2 0 3 Pin 1-2 Close (Default) 3 ■ 3 • 0 ° JUSBV3 Pin 2-3 Close 1 3 Note: In order to support is optional) This header allows user to connect additional USB cable with internal USB devices, like USB card reader. ■ _,_ ELDELO Pin - Biostar IDEQ N1 | MANUAL - Page 24
Source Connector This connector allows user to connect 20-pin power connector on the ATX power supply. 11 El I 1: • 20 10 Pin Assignment 1 +3.3V 2 +3.3V 3 Ground 4 +5V 5 Ground 6 +5V 7 Ground 8 PW_OK 9 Standby Voltage +5V 10 +12V 11 +3.3V 12 -12V 13 GND - Biostar IDEQ N1 | MANUAL - Page 25
: Clear CMOS Header By placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data, please carefully follow the procedures to avoid damaging the motherboard. 3 O Pin 1-2 Close: Normal Operation (Default). 1- 1 3 a 0. 3 Pin 2-3 Close: Clear CMOs data. Clear - Biostar IDEQ N1 | MANUAL - Page 26
3 Pin 2-3 Close +3.3V SB for 1394 chipset. JPANELl: Front Panel Header This 24-pin connector includes Power-on, Reset, HDD LED, Power LED, Sleep button, speaker and IrDA Connection. It allows user to connect the PC cases front panel switch functions. L=J PWR_LED SLP On/Off 000 •00000 00 24 - Biostar IDEQ N1 | MANUAL - Page 27
connector allows user to connect the audio source from the variety devices, like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc.. 4 L oo 4 Pin Assignment 1 Left Channel Input 2 Ground 3 Ground 4 Right Channel Input JSATA1--JSATA2: Serial ATA Connectors The motherboard has a PCI - Biostar IDEQ N1 | MANUAL - Page 28
floppy disk. 2. Download the Flash Utility AWDFLASH.exeDfrom the Biostarwebsite: www.biostar.com.tw 3. Confirm motherboard model and download the respectively BIOS from Biostar website. 4. Copy AWDFLASH.exeliand respectively BIOS into floppy disk. 5. Insert the bootable disk into floppy drive and - Biostar IDEQ N1 | MANUAL - Page 29
CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. In this case CPU protection function. 1. Remove the power cord from power supply for seconds. 2. Wait for seconds. 3. Plug in the power cord and boot up the system. - Biostar IDEQ N1 | MANUAL - Page 30
TROUBLESHOOTING Problem Solution 1. No power to the system at all 1. Make sure power cable is Power light dont illuminate, fan securely plugged in. inside power supply does not turn 2. Replace cable. on. 3. Contact technical support. 2. Indicator light on keyboard does not turn on. System - Biostar IDEQ N1 | MANUAL - Page 31
2 Chapter 2 25 - Biostar IDEQ N1 | MANUAL - Page 32
26 - Biostar IDEQ N1 | MANUAL - Page 33
Section 3 Peripheral Connections - Biostar IDEQ N1 | MANUAL - Page 34
3•1iOverview Your computer offers the following connectors for peripheral devices. As these devices are provided by third-parties, be sure that they function correctly when connected to your computer before you purchase them. Front Panel Connectors : Headphone Co 6 .i_ ._i _I Microphone USB Ports - Biostar IDEQ N1 | MANUAL - Page 35
off the computer and the peripheral device. Read the instructions on the manual or guide provided by the device manufacturer carefully. Insert the connector that comes from the device manufacturer to the proper I/O port. Install the drivers or other software that's required by the device so they - Biostar IDEQ N1 | MANUAL - Page 36
Connecting monitor To connect a monitor, plug the monitor cable into the VGA port located on the rear panel of your computer. L a (if0 00 .7.60(31 FE, 1 00 0 1-> Figure 3.3 Connecting mouse and keyboard Most of mouse and keyboard - Biostar IDEQ N1 | MANUAL - Page 37
the OS does not have the driver for your device, install the driver from the driver CD that is provided by the device manufacturer. 0 0 CED goo oo O •.• Digital camera PDA Scanner Figure 3.5 Note: The USB devices support "hot plugging," eliminating the need to power down or restart the computer - Biostar IDEQ N1 | MANUAL - Page 38
Connecting Audio Equipment Your computer is equipped with the following audio ports, which offer wide-range applications. "Headphone" jack: Use this jack to connect stereo headphone or amplified speakers to your computer. "Microphone" jack: Use this jack to connect microphone. "Line-in" jack: Use - Biostar IDEQ N1 | MANUAL - Page 39
the expansion port for parallel cable on the rear panel. If users would like to attach the printer through the parallel port, please by the printer manufacturer. q Note: To install the printer driver, please refer to the guide your printer manufacturer provides for you. Connecting LAN You can - Biostar IDEQ N1 | MANUAL - Page 40
34 - Biostar IDEQ N1 | MANUAL - Page 41
Section 4 Software Utility - Biostar IDEQ N1 | MANUAL - Page 42
) and the Installation Utility will auto run or you can launch the Driver CD Installation Utility manually. I ail Ltolicroltendows Me Version Lt.00B-IR ate 2 Driver Software and Update Utility s. User Manual NOW. EXIT Figure 4.1 There are two kinds of Installation Procedure: Automatically - Biostar IDEQ N1 | MANUAL - Page 43
exe file to run the utility manually. 5. Use the mouse cursor to click the Driver option on the page. 6. Driver setup utility will search for instructions to finish the installation. 11. Click on the next driver you want to install. 12. Repeat steps 8 to 10 until you have installed all the drivers - Biostar IDEQ N1 | MANUAL - Page 44
2. Click on the software you want to install. 3. The installation utility will start the installation wizard for the software you choose. 4. Follow the instruction steps of the wizard. 5. Repeat steps 2 to 4 if you want to install more. 6. When you are done, simply close the Installation Utility. 38 - Biostar IDEQ N1 | MANUAL - Page 45
cf - Biostar IDEQ N1 | MANUAL - Page 46
the outlet is functioning. If available, try to use a different power cable. 3. If the power cable and wall socket are OK, there may be a power supply failure. Contact your computer dealer for technical support and service. Keyboard and power LEDs light, and sound comes from the computer, but the - Biostar IDEQ N1 | MANUAL - Page 47
Problems • Keyboard doesn't take input, but mouse pointer moves when mouse is moved: 1. Make sure the keyboard, mouse or receiver is connected when you start the computer. 2. If you inadvertently start the system with the keyboard disconnected, shut down the system by pressing and holding the power - Biostar IDEQ N1 | MANUAL - Page 48
J.3 USB Device Problems Plug in any USB device but the display shows up as an unknown device in the Device Manager 1. Install the driver for your USB device. 2. Then plug in your USB device. USB device works when first plugged in, but does not work after system is woken - Biostar IDEQ N1 | MANUAL - Page 49
last resort, if the computer totally ignores the mouse, keyboard and power button, you can unplug the power cable; wait a moment; and then plug the power cable back in. This forces the computer to restart. 6. If the problem persists, contact your computer dealer for technical support and service. 43 - Biostar IDEQ N1 | MANUAL - Page 50
44 - Biostar IDEQ N1 | MANUAL - Page 51
Section 6 Taking care of Your Computer - Biostar IDEQ N1 | MANUAL - Page 52
D.ii General Maintenance Before you install any computer component, we recommend that you read the following instructions. • Electrostatic discharge can damage the components of your computer. Do not remove a component from its protective packaging until you are ready to install it. Avoid - Biostar IDEQ N1 | MANUAL - Page 53
all cautions and follow the instructions that may be marked on the computer. Except as described elsewhere in this manual, refer all servicing to qualified personnel. Immediately shut off the computer and refer for servicing under the following conditions: 1. When the power cord or plug is damaged - Biostar IDEQ N1 | MANUAL - Page 54
48 - Biostar IDEQ N1 | MANUAL - Page 55
Appendix Installing Mainboard - Biostar IDEQ N1 | MANUAL - Page 56
A.1 Installing Mainboard Before installing mainboard, users have to remove the two-side and top cover panels. Then remove the front cover panel for inserting the mainboard into the chassis. Removing The - Biostar IDEQ N1 | MANUAL - Page 57
A Appendix Then use the screwdriver to remove the two screws on the top of front cover panel. Installing Mainboard Insert the mainboard from the side into the base of the chassis and place it close to the Back panel. After fixing the mainboard on the base of the chassis, you will find there are six - Biostar IDEQ N1 | MANUAL - Page 58
Connect the cable of LEDs indicator and front- panel switches to "JPANELl" connector on the Mainboard. ri Connect the cable of system fon t0 "JSFAN1" connector on the mainboard. -10 Figure A.7 7 ' Connect the cable to the floppy, CD-ROM and HDD. !re Place the CD-ROM bracket and fix it with 2 - Biostar IDEQ N1 | MANUAL - Page 59
A Appendix Place HDD bracket. Fix it with one screw. -own Figure A.11 De' .0111 Figure A.12 Completing The Installation Place the front panel back and fix it with four screws to complete the installation of mainboard. at, t Figure A.13 Note: The figures show the locations of connectors on
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
 |
 |
Mini
PC
System
User's
Manuel
MI