Biostar M5ATC M5ATC user's manual
Biostar M5ATC Manual
 |
View all Biostar M5ATC manuals
Add to My Manuals
Save this manual to your list of manuals |
Biostar M5ATC manual content summary:
- Biostar M5ATC | M5ATC user's manual - Page 1
Chapter 1 System Board - Biostar M5ATC | M5ATC user's manual - Page 2
Chapter 1 ! − − − − System Board - Biostar M5ATC | M5ATC user's manual - Page 3
Chapter 1 − − − − − − − System Board - Biostar M5ATC | M5ATC user's manual - Page 4
Chapter 1 − − − ! − − − ! System Board - Biostar M5ATC | M5ATC user's manual - Page 5
Chapter 1 System Board - Biostar M5ATC | M5ATC user's manual - Page 6
Chapter 1 System Board JP4 1 3 Closed 1 3 Closed 1 3 Open Assignment Normal Operation Clear CMOS Data Onboard Battery Disabled - Biostar M5ATC | M5ATC user's manual - Page 7
Chapter 1 Note : System Board - Biostar M5ATC | M5ATC user's manual - Page 8
Chapter 1 System Board JP15 1 2 3.5V 3.5V 1-2 closed 3-4 closed 5-6 closed 7-8 closed open Dual Voltage 2.1V 3.3V 1-2 closed 3-4 open open - Biostar M5ATC | M5ATC user's manual - Page 9
Chapter 1 K6 2.2V 2.8V 2.9V 3.2V 3.3V 2.2V 3.3V 3.3V 3.3V 3.3V 3.3V 3.45V System Board 5-6 open 7-8 open 1-2 open 3-4 closed 5-6 open 7-8 open 1-2 open 3-4 open 5-6 open 7-8 closed 1-2 closed 3-4 open 5-6 open 7-8 closed 1-2 open 3-4 open 5-6 closed 7-8 closed 1-2 closed 3-4 open 5-6 closed 7-8 - Biostar M5ATC | M5ATC user's manual - Page 10
Chapter 1 System Board CPU Speed Bus Clock & Multiplier 60MHz x 1.5 66MHz x 1.5 60MHz x 2 66MHz x 2 60MHz x 2.5 66MHz x 2.5 66MHz x 3 66MHz x 3.5 JP9 (1-2) closed open closed open closed open open open JP9 (3-4) open open open open open open open open JP9 (5-6) open open open open open open - Biostar M5ATC | M5ATC user's manual - Page 11
Chapter 1 System Board Multiplier = 2.5 * JP6(1-2) open & JP6(3-4) closed & JP6(5-6) open : Multiplier = 3 * JP6(1-2) open & JP6(3-4) open & JP6(5-6)open : Multiplier = 3.5 * JP6(1-2)closed& JP6(3-4)open & JP6(5-6)closed : Multiplier = 4 CPU Bus Clock & JP9 Speed Multiplier (1-2) 60MHz x 2 - Biostar M5ATC | M5ATC user's manual - Page 12
Chapter 1 66MHz x 3.5 75MHz x 3 75MHz x 3.5 open open open open closed closed open closed closed open open open System Board open closed open open open open CPU Speed JP9 (1-2) closed open closed open open open JP9 (3-4) open open open open open open JP9 (5-6) open open open open open - Biostar M5ATC | M5ATC user's manual - Page 13
Chapter 1 System Board Pin Assignment Function Pin Assignment No. No. 1 Speaker 14 +5V 2 NC Speaker 15 Ground 3 Ground Connector 16 No Connection 4 +5V 17 Green Control 5 Power LED(+) 18 Ground 6 No Connection Power LED 19 No Connection 7 Ground & 20 HDD LED(-) 8 Key - Biostar M5ATC | M5ATC user's manual - Page 14
Chapter 1 System Board 1 Pin No. 5 Assignment Mouse Data No Connection Ground +5V Mouse Clock B5 B1 USB A1 A5 Pin No. Assignment +5V Port 1 Negative Data Port 1 Positive Data Ground No Connection Pin No. Assignment No Connection Ground Port 2 Positive Data Port 2 Negative Data +5V - Biostar M5ATC | M5ATC user's manual - Page 15
Chapter 1 System Board Pin No. Assignment Ground +12 V - Biostar M5ATC | M5ATC user's manual - Page 16
Chapter 1 System Board Pin No. Pin No. Assignment +5 VSB Ground MP-Wakeup Assignment Wakeup Signal GND - Biostar M5ATC | M5ATC user's manual - Page 17
Chapter 1 System Board Total Memory Size (MB) 8M 16M 32M 64M 16M 24M 40M 72M 24M 32M 48M 80M 40M 48M 64M 96M 72M 80M 96M 128M Bank 2 SIM1-SIM2 4M x 2 pcs 8M x 2 pcs 16M x 2pcs 32M x 2pcs 4M x 2pcs 8M x 2pcs 16M x 2 pcs 32M x 2 pcs 4M x 2 pcs 8M x 2 pcs 16M x 2 pcs 32M x 2 pcs 4M x 2 pcs 8M x 2 - Biostar M5ATC | M5ATC user's manual - Page 18
Chapter 1 System Board Iron Safety Tab" - Biostar M5ATC | M5ATC user's manual - Page 19
Chapter 1 System Board Total Memory Size (MB) 8M 16M 32M 64M 16M 24M 40M 72M 24M 32M 48M 80M 40M 48M 64M 96M 72M 80M 96M 128M Bank 0 DIMM 1 8M x 1 pc 16M x 1 pc 32M x 1 pc 64M x 1 pc 8M x 1 pc 16M x 1 pc 32M x 1 pc 64M x 1 pc 8M x 1 pc 16M x 1 pc 32M x 1 pc 64M x 1 pc 8M x 1 pc 16M x 1 pc 32M x 1 - Biostar M5ATC | M5ATC user's manual - Page 20
Chapter 1 System Board Plastic Safety Tab" - Biostar M5ATC | M5ATC user's manual - Page 21
Chapter 1 System Board Del CTRL Alt Del Esc TO ENTER SETUP BEFORE BOOT PRESS CTRL-ALT-ESC OR DEL KEY Delete CTRL Alt PRESS F1 TO CONTINUE, CTRL-ALT-ESC OR DEL TO ENTER SETUP F1 Esc - Biostar M5ATC | M5ATC user's manual - Page 22
Chapter 1 Down arrow Left arrow Right arrow Esc key PgUp key PgDn key + key - key F1 key (Shift) F2 key F3 key F4 key F5 key F6 key F7 key F8 key F9 key F10 key System Board Move to next item Move to the item in left hand Move to the item in right hand Main Menu-Quit and not save changes into COMS - Biostar M5ATC | M5ATC user's manual - Page 23
Chapter 1 System Board STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP PNP / PCI CONFIGURATION LOAD SETUP DEFAULTS SUPERVISOR PASSWORD USER PASSWORD IDE HDD AUTO DETECTION SAVE & EXIT SETUP EXIT WITHOUT SAVING Esc : Quit F10 : Save & Exit Setup : Select - Biostar M5ATC | M5ATC user's manual - Page 24
Chapter 1 System Board - Biostar M5ATC | M5ATC user's manual - Page 25
Secondary Slave : Auto 0 0 0 0 0 0 Auto 0 0 0 Auto 0 0 0 Auto 0 0 0 Auto Drive A :1.44MB, 3.5 in. Drive B :None Base Memory : 0K Floppy 3 Mode Support : Disabled Extended Memory : 0K Other Memory : 512K Video :EGA/VGA Total Memory : 512K Halt On :All, But Keyboard - Biostar M5ATC | M5ATC user's manual - Page 26
Chapter 1 System Board CYLN HEAD WPCOM SEC LBA MODE BLK MODE PIO MODE 32BIT MODE - Biostar M5ATC | M5ATC user's manual - Page 27
Chapter 1 System Board None 360K, 5 1/4 1.2M, 5 1/4 720K, 3 1/2 1.44M, 3 1/2 2.88M, 3 1/2 No floppydrive installed 5-1/4 inch PC-type standard drive; 360 kilobyte capacity 5-1/4 inch AT-type high-density drive; 1.2 megabyte capacity 3-1/2 inch double-sided drive; 720 kilobyte capacity 3-1/2 inch - Biostar M5ATC | M5ATC user's manual - Page 28
Chapter 1 System Board - Biostar M5ATC | M5ATC user's manual - Page 29
Chapter 1 System Board The information about BIOS defaults on manual is just for reference, please refer to the BIOS installed on board, for update information. " Virus Warning : Disabled Video BIOS Shadow : Enabled CPU Intermal Cache : - Biostar M5ATC | M5ATC user's manual - Page 30
Chapter 1 Enabled Enabled Disabled Enabled Disabled System Board Default is Disabled. Enabled Disabled - Biostar M5ATC | M5ATC user's manual - Page 31
Chapter 1 On Off Enabled Disabled System Board System - Biostar M5ATC | M5ATC user's manual - Page 32
Chapter 1 Setup System Board Disabled Enabled DEFAULT is Non-OS2. - Biostar M5ATC | M5ATC user's manual - Page 33
Chapter 1 Enabled Disabled Enabled Disabled Note System Board - Biostar M5ATC | M5ATC user's manual - Page 34
Chapter 1 System Board " Auto Configuration AT Bus Clock DRAM Write WS Page Mode Read WS RAS Precharge Period RAS-To-CAS Delay Time EDO Read WS DRAM Speculative Read SDRAM CAS Latency SDRAM Access Timing SDRAM Speculative Read Pipelined Function DRAM Refresh Period DRAM Data Integrity Mode Memory - Biostar M5ATC | M5ATC user's manual - Page 35
Board Power Management PM Control by APM MODEM Use IRQ Video Off Option Video Off Method : Disabled : Yes : 3 : Suspend -> Off : DPMS Support ** PM Monitor ** HDD Power Down : Disabled Doze Mode : Disabled Standby Mode : Disabled Suspend Mode : Disabled ** Standby Events ** Primary HDD - Biostar M5ATC | M5ATC user's manual - Page 36
Chapter 1 Disable User Define No Yes Blank Screen V/H SYNC+Blank DPMS System Board - Biostar M5ATC | M5ATC user's manual - Page 37
Chapter 1 " PNP OS Installed Resources Controlled BY Reset Configuration Data IRQ-3 assigned to IRQ-4 assigned to IRQ-5 assigned to IRQ-7 assigned to IRQ-9 assigned to IRQ-10 assigned to IRQ-11 assigned to IRQ-12 assigned to IRQ-14 assigned to IRQ-15 assigned to DMA-0 assigned to DMA-1 assigned to - Biostar M5ATC | M5ATC user's manual - Page 38
Chapter 1 System Board - Biostar M5ATC | M5ATC user's manual - Page 39
Chapter 1 PCI-Auto : PCI-Slot 1-4 : ISA : System Board - Biostar M5ATC | M5ATC user's manual - Page 40
Chapter 1 " System Board BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP PCI & PCI CONFIGUR LOAD SETUP DEFAULTS SUPERVISOR PASSWORD USER PASSWORD IDE HDD AUTO DETECTION SETUP SAVING Esc : Quit F10 : Save & Exit Setup : Select Item (Shift) F2 : Change Color Load SETUP Defaults - Biostar M5ATC | M5ATC user's manual - Page 41
Chapter 1 System Board " On-Chip IDE Controller On-Chip Secondary PCI IDE IDE Primary Master PIO IDE Primary Slave PIO IDE Secondary Master PIO IDE Secondary Slave PIO IDE Primary Master UDMA IDE Primary Slave UDMA IDE Secondary Master UDMA IDE Secondary Slave UDAM IDE HDD Block Mode On-Chip USB - Biostar M5ATC | M5ATC user's manual - Page 42
Chapter 1 System Board Enabled / Disabled Disabled / (3F8 / IRQ4) / (2F8 / IRQ3) / (3E8 / IRQ4) / (2E8 / IRQ3) Disabled / (3F8 / IRQ4) / (2F8 / IRQ3) / (3E8 / IRQ4) / (2E8 / IRQ3) Disabled Disabled/ (3BC/IRQ7)/ - Biostar M5ATC | M5ATC user's manual - Page 43
Chapter 1 (278 /IRQ5)/ (378 /IRQ7) Disable System Board " - Biostar M5ATC | M5ATC user's manual - Page 44
Chapter 1 System Board BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP PNP / PCI CONFIGURATION LOAD SETUP DEFAULTS SUPERVISOR PASSWORD USER PASSWORD IDE HDD AUTO DETECTION SAVE & EXIT SETUP SAVING Esc : Quit F10 : Save & Exit Setup : Select Item (Shift) F2 : Change Color - Biostar M5ATC | M5ATC user's manual - Page 45
Chapter 1 " System Board HARD DISKS TYPE SIZE Primary Master :User 343 665 16 65535 664 63 NORMAL OPTIONS Select Primary Slave Option (N=Skip) N Note : Some Oses (like SCO-UNIX) must use "NORMAL" for installation ESC : Skip "Y" Esc Enter Enter - Biostar M5ATC | M5ATC user's manual - Page 46
Chapter 1 " System Board BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP PNP / PCI CONFIGUF LOAD SETUP DEFAULTS SUPERVISOR PASSWORD USER PASSWORD IDE HDD AUTO DETECTION EXIT WITHOUT SAVI ETUP SAVING Esc : Quit F10 : Save & Exit Setup : Select Item (Shift) F2 : Change Color - Biostar M5ATC | M5ATC user's manual - Page 47
Chapter 1 " System Board BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP PNP / PCI CONFIGUF LOAD SETUP DEFAULTS SUPERVISOR PASSWORD USER PASSWORD IDE HDD AUTO DETECTION EXIT WITHOUT SAVI TUP AVING Esc : Quit F10 : Save & Exit Setup : Select Item (Shift) F2 : Change Color - Biostar M5ATC | M5ATC user's manual - Page 48
Chapter 1 − − " System Board - Biostar M5ATC | M5ATC user's manual - Page 49
Chapter 1 System Board INSTALL.BAT OR Control Panel Add New Hardware Next No Next Hard disk controller Next Have Disk Alt+H OK Select Device Next - Biostar M5ATC | M5ATC user's manual - Page 50
Chapter 1 How to uninstall drivers ? UNINSTAL.BAT System Board Attention : DO NOT RESTART COMPUTER after Win95 just finish primary channel RESTART COMPUTER Panel / System/ Device Manager Control
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
 |
 |
Chapter 1
System Board
±²³´
±²³´µ¶·¸³¹µ²
±²³´µ¶·¸¹µº¹»µ¼
±²³´µ¶·¸¹´º»¼¶¸½¶¸·¾³¿´¿À¿¾³Á´µ¶·¸¹Â´ÃÄÅ´ÃÆÇ´·»¹´ÈÉôÃÊË´º»´¶»³
µ¶·¸¹´ ¾²·¾´ ½¸¶Ìº¹³¿´ ·ÍÍ´ ¾²³´ ÈÉ´ ¿¶Íξº¶»¿Ï´ ±²³´ Á·º»µ¶·¸¹´ º¿´ ·
ȳ»¾ºÎÁ
±²
´Áº¼¸¶´½¸¶¼³¿¿¶¸´µ·¿³¹´ÈÉÆű´¿À¿¾³Á´¿Î½½¶¸¾¿´°!"#$
¾¶´ %&´ ¼·¼²³´ 'º¾²´ ÃÄÅ´ $ο´ ·»¹´ ÈÉô (¶¼·Í´ $ο´ ¾¶´ ν)¸·¹³´ À¶Î¸
¿À¿¾³Á´½³¸*¶¸Á·»¼³Ï´Ã¾´º¿´º¹³·Í´*¶¸´ÁÎ;º+¾·¿,º»)´·»¹´*ÎÍÍÀ´¿Î½½¶¸¾¿
&Ä+ÊÇÄ´-º»¹¶'¿Â´-º»¹¶'¿´.±Â´.¶Ì³ÍÍ´ÇÄư´-º»¹¶'¿/!´0.Ã1Â
ÄÉÇ´ 0.Ã1´ ³¾¼Ï´ ±²º¿´ Á·»Î·Í´ ·Í¿¶´ ³2½Í·º»¿´ ²¶'´ ¾¶´ º»¿¾·ÍÍ´ ¾²³
Á·º»µ¶·¸¹´
*¶¸´
¶½³¸·¾º¶»Â´
·»¹´
²¶'´
¾¶´
¿³¾Î½´
À¶Î¸´
É&ÇÄ
¼¶»*º)θ·¾º¶»´'º¾²´$ÃÇÄ´¿³¾Î½´½¸¶)¸·ÁÏ