Biostar M7VIG 400 M7VIG 400 user's manual

Biostar M7VIG 400 Manual

Biostar M7VIG 400 manual content summary:

  • Biostar M7VIG 400 | M7VIG 400 user's manual - Page 1
    energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee vendor's approval in writing. The content of this user's manual is subject to be changed without notice and we will not be responsible for any mistakes
  • Biostar M7VIG 400 | M7VIG 400 user's manual - Page 2
    6 CPU Installation...6 DDR DIMM Modules: DDR1, DDR2 7 Installing DDR Module 8 Jumpers, Headers, Connectors & Slots 8 FRANÇAIS 13 Caractéristiques de M7VIG 400 13 Contenu de l'Emballage 14 WARPSPEEDER 15 Introduction ...15 System Requirement 15 Installation ...16 Usage ...17 TROUBLE SHOOTING
  • Biostar M7VIG 400 | M7VIG 400 user's manual - Page 3
    MM77VVIIGG 440000 Layout of M7VIG 400 NOTE: ●represents the first pin. 1
  • Biostar M7VIG 400 | M7VIG 400 user's manual - Page 4
    P. IDE Connectors (IDE1-2) G. Accelerated Graphics Port Slot (AGP1) Q. Frequency Selection (JCLK1) H. Digital Audio Connector (JSPDIF1)* R. DDR Modules (DDR1-2) I. PCI BUS Slots (PCI 1-3) S. Clear CMOS Function (JCMOS1) J. Communication Network Riser Slot (CNR1)* * stands for "optional". 2
  • Biostar M7VIG 400 | M7VIG 400 user's manual - Page 5
    MM77VVIIGG 440000 M7VIG 400 System Structure 3
  • Biostar M7VIG 400 | M7VIG 400 user's manual - Page 6
    MM77VVIIGG 440000 English M7VIG 400 Features A. Hardware CPU Provides Socket A. Supports single AMD® Athlon XP/ Duron Family processor. Front Side Bus at 200/266/333 MHz. Chipset North Bridge: VIA KM266 Pro. South Bridge: VIA VT8235. Main Memory Supports up to 2 DDR devices. Supports 200/266/333 MHz
  • Biostar M7VIG 400 | M7VIG 400 user's manual - Page 7
    BIOS. Supports APM1.2. Supports ACPI. Supports USB Function. Software Supports Warpspeeder™, 9th Touch™, FLASHER™ Offers the highest performance for Windows 98 SE, Windows 2000, Windows Me, Windows XP, UNIX Series etc. Package contents HDD Cable X 1 FDD Cable X 1 User's Manual X 1 Fully Setup Driver
  • Biostar M7VIG 400 | M7VIG 400 user's manual - Page 8
    jumper whose pin 1 and 2 are "close" when jumper cap is placed on these 2 pins. Jumper open Jumper close Pin1-2 close CPU Installation Step1: Pull the lever sideways away from the socket and then raise the lever up to a 90-degree angle. Step2: Look for the white dot/cut edge. The white dot
  • Biostar M7VIG 400 | M7VIG 400 user's manual - Page 9
    MM77VVIIGG 440000 CPU Fan Header: JCFAN1 Pin 1 1 2 JCFAN1 3 Assignment Ground +12V FAN RPM Type required. DRAM Type: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM Module (184 pin) DIMM Socket Location DDR Module Total Memory Size (MB) DDR 1 64MB/128MB/256MB/512MB/1GB *1 Max is DDR 2 64MB/128MB/
  • Biostar M7VIG 400 | M7VIG 400 user's manual - Page 10
    that video card. This motherboard supports video video efficiency and performance, especially with 3D graphics. Communication Network Riser Slot: CNR1 (optional) The CNR specification is an open Industry Standard Architecture, and it defines a hardware scalable riser card interface, which supports
  • Biostar M7VIG 400 | M7VIG 400 user's manual - Page 11
    MM77VVIIGG 440000 JCI1 2 Front Panel Connector: JPANEL1 Ground JPANEL1 PWR_ LED SLP ON/ OFF 2 1 SPK (+ ) (-) HLED RST IR 24 23 IR Pin Assignment 1 +5V 3 NA 5 NA 7 Speaker 9 HDD LED (+) 11 HDD LED (-) 13 Ground 15 Reset Control 17 NA 19 NA 21 +5V 23 IRTX Function
  • Biostar M7VIG 400 | M7VIG 400 user's manual - Page 12
    (default) Clear CMOS Data Pin 2-3 Close ※ Clear CMOS Procedures: 1. Remove AC power line. 2. Set the jumper to "Pin 2-3 Close". 3. Wait for five seconds. 4. Set the jumper to "Pin 1-2 Close". 5. Power on the AC. 6. Reset your desired password or clear the CMOS data. CD-ROM Audio-In Header
  • Biostar M7VIG 400 | M7VIG 400 user's manual - Page 13
    Header: JF_AUDIO1 Open 2 14 1 13 JF_AUDIO1 Pin Assignment Pin Assignment 1 Mic In/ Center 2 Ground 3 Mic Power/ Bass 4 Audio Power 5 Right Line Out/ Speaker Out 6 Right Line Out/ Speaker Out Right Right 7 Reserved 8 Key 9 Left Line Out/ Speaker Out 10 Left Line Out/ Speaker
  • Biostar M7VIG 400 | M7VIG 400 user's manual - Page 14
    MM77VVIIGG 440000 6 Channel Speakers Speaker Out/ Front Speaker (Right & Left) Line In/ Rear Speaker (Left & Right) Mic In/ Center & Bass 12
  • Biostar M7VIG 400 | M7VIG 400 user's manual - Page 15
    de M7VIG 400 A. Matériel Processeur Avec socket A. Prise en charge du processeur AMD® Athlon XP/Duron Family. Bus frontal à 200/266/333 MHz. Jeu de puces North Bridge : VIA KM266 Pro. South Bridge : VIA VT8235. Mémoire principale Prise en charge de de quatre lecteurs de disque IDE. Prise en charge de
  • Biostar M7VIG 400 | M7VIG 400 user's manual - Page 16
    B. BIOS et logiciel BIOS Award legal Bios. APM1.2. ACPI. Fonction USB. Logiciel Prise en charge de WarpspeederTM, 9th TouchTM, FLASHER™. Offrant la meilleure performance pour Windows 98 SE, Windows 2000, Windows Me, Windows XP, UNIX series etc. Contenu de l'Emballage Câble de Disque Dur X1 Câble de
  • Biostar M7VIG 400 | M7VIG 400 user's manual - Page 17
    about BIOS model and chipsets. In addition, the frequency status of CPU, memory, AGP and PCI along with the CPU speed are Support: Windows 98 SE, Windows Me, Windows 2000, Windows XP DirectX: DirectX 8.1 or above. (The Windows XP operating system includes DirectX 8.1. If you use Windows XP
  • Biostar M7VIG 400 | M7VIG 400 user's manual - Page 18
    MM77VVIIGG 440000 Installation 1. Execute the setup execution file, and then the following dialog will pop up. Please click "Next" button and follow the default procedure to install. 2. When you see the following dialog in setup procedure, it means setup is completed. If the "Launch the WarpSpeeder
  • Biostar M7VIG 400 | M7VIG 400 user's manual - Page 19
    MM77VVIIGG 440000 Usage The following figures are just only for reference, the screen printed in this user manual will change according to your motherboard on hand. [WarpSpeeder™] includes 1 tray icon and 5 panels: 1. Tray Icon: Whenever the Tray Icon utility is launched, it will display a little
  • Biostar M7VIG 400 | M7VIG 400 user's manual - Page 20
    little tray icon to pop up a popup menu as following figure. The "Launch Utility" item in the popup menu has the same function as mouse left-click 's first window you will see is Main Panel. Main Panel contains features as follows: a. Display the CPU Speed, CPU external clock, Memory clock, AGP
  • Biostar M7VIG 400 | M7VIG 400 user's manual - Page 21
    will be highlighted and the Voltage Panel will slide out to up as the following figure. In this panel, you can decide to increase CPU core voltage and Memory voltage or not. The default setting is "No". If you want to get the best performance of overclocking, we recommend you click the
  • Biostar M7VIG 400 | M7VIG 400 user's manual - Page 22
    MM77VVIIGG 440000 4. Overclock Panel Click the Overclock button in Main Panel, the button will be highlighted and the Overclock Panel will slide out to left as the following figure. 20
  • Biostar M7VIG 400 | M7VIG 400 user's manual - Page 23
    3MHz button", "-1MHz button", "+1MHz button", and "+3MHz button": provide user the ability to do real-time overclock adjustment. Warning: Manually overclock is potentially dangerous, especially when the overclocking percentage is over 110 %. We strongly recommend you verify every speed you overclock
  • Biostar M7VIG 400 | M7VIG 400 user's manual - Page 24
    MM77VVIIGG 440000 d. "Auto-overclock button": User can click this button and [ WarpSpeeder™ ] will set the best and stable performance and frequency automatically. [ WarpSpeeder™ ] utility will execute a series of testing until system fail. Then system will do fail-safe reboot by using Watchdog
  • Biostar M7VIG 400 | M7VIG 400 user's manual - Page 25
    , you can get model name and detail information in hints of all the chipset that are related to overclocking. You can also get the mainboard's BIOS model and the Version number of [ WarpSpeeder™ ] utility. 23
  • Biostar M7VIG 400 | M7VIG 400 user's manual - Page 26
    hardware monitor features are controlled by several separate chipset, [ WarpSpeeder™ ] divide these features to separate panels. If one chipset is not on board, the correlative button in Main panel will be disabled, but will not interfere other panels' functions. This property can make [ WarpSpeeder
  • Biostar M7VIG 400 | M7VIG 400 user's manual - Page 27
    to disk controller be booted from CD-ROM drive. board. Make sure both ends are securely plugged in; check the drive type in the standard CMOS setup. * Backing up * Review system's equipment . Make sure "CMOS Failure." correct information is in setup. PROBABLE SOLUTION Cannot boot system
  • Biostar M7VIG 400 | M7VIG 400 user's manual - Page 28
    MM77VVIIGG 440000 3/26/2004 26
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

M
M
7
7
V
V
I
I
G
G
4
4
0
0
0
0
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. There is no guarantee that interference will not occur in
a particular installation.
The vendor makes no representations or warranties with respect to the
contents here of and specially disclaims any implied
warranties
of
merchantability or fitness for any purpose. Further the vendor reserves
the right to revise this publication and to make changes to the contents
here of without obligation to notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without
first obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice
and we will not be responsible for any mistakes found in this user’s
manual. All the brand and product names are trademarks of their
respective companies.
i