Biostar N68S3B Setup Manual
Biostar N68S3B Manual
 |
View all Biostar N68S3B manuals
Add to My Manuals
Save this manual to your list of manuals |
Biostar N68S3B manual content summary:
- Biostar N68S3B | Setup Manual - Page 1
N68S3B Setup Manual FCC Information and Copyright This equipment has been tested and found to not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. The - Biostar N68S3B | Setup Manual - Page 2
Raid Arrays 18 4.3 How RAID Works 18 Chapter 5: Useful Help 20 5.1 Driver Installation Note 20 5.2 Software 21 5.3 Extra Information 24 5.4 AMI BIOS Beep Code 25 5.5 Troubleshooting 26 Appendix: SPEC In Other Languages 28 German...28 French ...30 Italian...32 Spanish ...34 - Biostar N68S3B | Setup Manual - Page 3
X 1 (optional) Serial ATA Cable X 2 Rear I/O Panel for ATX Case X 1 Installation Guide X 1 Fully Setup Driver CD X 1 (full version manual files inside) USB 2.0 Cable X1 (optional) Serial ATA Power Cable X 1 (optional) Note: The package contents may be differed by area or your motherboard version. 1 - Biostar N68S3B | Setup Manual - Page 4
Motherboard Manual 1.3 MOTHERBOARD FEATURES SPEC Socket AM3 AMD 64 Architecture enables 32 and 64 bit CPU AMD Phenom II/ Athlon II processors computing (Maximum Watt: 95W) Supports Hyper Transport 2.0 Support HyperTransport 2.0 FSB Supports up to 2.0 GT/s Bandwidth Chipset GeForce 7025/ - Biostar N68S3B | Setup Manual - Page 5
Back Panel VGA port I/O LAN port USB Port Audio Jack Board Size 170 mm(W) x 235 mm(L) Special Features RAID 0 / 1 OS Support Windows XP / Vista / 7 N68S3B SPEC x1 Restore CMOS data to factory default x2 Each connector supports 2 front panel USB ports x1 Connects to Power supply x1 - Biostar N68S3B | Setup Manual - Page 6
Motherboard Manual 1.5 MOTHERBOARD LAYOUT JKB MS JKB_PWR JATXP WR4 J ATXPW R1 So ck et A M 3 JVGA DDR3_A1 DDR3_B1 IDE J USB1 JCFAN JUSBLA N1 JUSBPWR1 JA UDIO1 BAT1 GeForce 7025/ nForce 630a LAN JAU DIOF Codec JPRNT PEX16_1 BIOS PCI1 Note: ■ represents the 1st pin. JUSB PWR2 JUSB2 - Biostar N68S3B | Setup Manual - Page 7
N68S3B 2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU) Step 1: Pull the lever toward direction A from the socket and then raise the lever up to a 90-degree angle. Step 2: Look for the white triangle on socket, and the gold triangle on CPU should point towards this white triangle. The CPU will - Biostar N68S3B | Setup Manual - Page 8
Motherboard Manual Step 3: Hold the CPU down firmly, and then close the lever toward direct B to complete the installation. Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU FAN power cable to the JCFAN. This completes the installation. 6 - Biostar N68S3B | Setup Manual - Page 9
N68S3B 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1. JCFAN: CPU Fan Header Pin Assignment 1 Ground 4 2 - Biostar N68S3B | Setup Manual - Page 10
DDR3 _A1 DDR3 _B1 Motherboard Manual 2.3 INSTALLING SYSTEM MEMORY A. Memory Modules 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot so that the notch on the DIMM - Biostar N68S3B | Setup Manual - Page 11
B. Memory Capacity DIMM Socket Location DDR3 Module DDR3_A1 512MB/1GB/2GB/4GB DDR3_B1 512MB/1GB/2GB/4GB N68S3B Total Memory Size Max is 8GB. C. Dual Channel Memory installation Please refer to the following requirements to activate Dual Channel function: Install memory module of the same - Biostar N68S3B | Setup Manual - Page 12
/ATAPI Connector The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality. The IDE connector can connect a master and a slave drive, so you can connect up to two drives. 40 39 21 JATXPWR4: ATX Power Source Connector - Biostar N68S3B | Setup Manual - Page 13
N68S3B JATXPWR1: ATX Power Source Connector This connector allows user to connect 24-pin power connector on the ATX power supply. 12 Standby Voltage+5V 10 +12V 11 +12V 12 +3.3V Note: Before you power on the system, please make sure that both JATXPWR1 and JATXPWR4 connectors have been plugged-in - Biostar N68S3B | Setup Manual - Page 14
Motherboard Manual PEX16_1: PCI-Express Gen2 x16 Slot - PCI-Express 1.0a compliant. - Maximum theoretical realized bandwidth of 4GB/s simultaneously per direction, for an aggregate of 8GB/s totally. - PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins. - 2X bandwidth over the - Biostar N68S3B | Setup Manual - Page 15
N68S3B CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW TO SETUP JUMPERS The illustration closed Pin1-2 closed 3.2 DETAIL SETTINGS JPANEL1: Front Panel Header This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, Sleep, and speaker connection. It allows user to connect the PC case's front - Biostar N68S3B | Setup Manual - Page 16
USB devices, like USB card reader. JUSB2 JUSB3 10 9 2 1 Pin Assignment 1 +5V (fused) 2 +5V (fused) 3 USB4 USB5 USB+ 6 USB+ 7 Ground 8 Ground 9 NC 10 Key SATA1/SATA2: Serial ATA Connectors The motherboard has a PCI to SATA Controller with 2 channels SATA interface, it satisfies the SATA 2.0 spec - Biostar N68S3B | Setup Manual - Page 17
it allows user to restore the BIOS safe setting and the CMOS data, please carefully follow the procedures to avoid damaging the motherboard. 31 Pin 1-2 Close: Normal Operation (default). 31 3 1 Pin 2-3 Close: Clear CMOS data. ※ Clear CMOS Procedures: 1. Remove AC power line. 2. Set the jumper to - Biostar N68S3B | Setup Manual - Page 18
Motherboard Manual JPRNT: Printer Port Connector This header allows you to connect printer port on the PC. 2 7 18 Ground 19 -ACK 20 Ground 21 Busy 22 Ground 23 PE 24 Ground 25 SCLT 26 Key JKB_PWR: Power Source Header for PS/2 Keyboard and Mouse 1 3 1 3 Pin 1-2 close +5V for PS/2 keyboard and - Biostar N68S3B | Setup Manual - Page 19
N68S3B JUSBPWR1/JUSBPWR2: Power Source Headers for USB Ports Pin 1-2 Close: JUSBPWR1: +5V for USB ports at JUSB1/JUSBLAN1. JUSBPWR2: +5V for USB ports at front panel (JUSB2/JUSB3). Pin 2-3 Close: JUSBPWR1: +5V STB for USB ports at JUSB1/JUSBLAN1. JUSBPWR2: +5V STB for USB ports at front panel (JUSB2 - Biostar N68S3B | Setup Manual - Page 20
Motherboard Manual CHAPTER 4: RAID FUNCTIONS 4.1 OPERATING SYSTEM Supports Windows XP, Windows Vista, and Windows 7. 4.2 RAID ARRAYS RAID supports the following types of RAID arrays: RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for many applications. RAID 1: - Biostar N68S3B | Setup Manual - Page 21
N68S3B RAID 1: Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk as a form of automatic backup that eliminates tedious manual backups to more expensive and less reliable media. - Biostar N68S3B | Setup Manual - Page 22
. Note: If this window didn't show up after you insert the Driver CD, please use file browser to locate and execute the file SETUP.EXE under your optical drive. A. Driver Installation To install the driver, please click on the Driver icon. The setup guide will list the compatible driver for your - Biostar N68S3B | Setup Manual - Page 23
3. Follow the on-screen instructions to complete the installation. BIOScreen Utility This utility allows you to personalize your boot logo easily. You can choose JPG or BMP as your boot logo so as to customize your computer. Please follow the following instructions to update boo logo: 1. Load Image - Biostar N68S3B | Setup Manual - Page 24
Motherboard Manual BIOS Update BIOS Update is a convenient utility which allows you to update your motherboard BIOS under Windows system. AWARD BIOS Show current BIOS information AMI BIOS Clear CMOS function (Only for AWARD BIOS) Save current BIOS to a .bin file Update BIOS - Biostar N68S3B | Setup Manual - Page 25
N68S3B Before doing this, please download the proper BIOS file from the website. For AWARD BIOS, update BIOS procedure should be run with Clear CMOS function, so please check on Clear CMOS first. Then click Update BIOS button, a dialog will show for asking you backup current BIOS. - Biostar N68S3B | Setup Manual - Page 26
Motherboard Manual 5.3 EXTRA INFORMATION CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the - Biostar N68S3B | Setup Manual - Page 27
. Insert the cards back into the system one at a time until the problem happens again. This will reveal the malfunctioning card. If the system video adapter is an add-in card, replace or 8 reseat the video adapter. If the video adapter is an integrated part of the system board, the board may be - Biostar N68S3B | Setup Manual - Page 28
Motherboard Manual 5.5 TROUBLESHOOTING Probable Solution 1. There is no power in the system. 1. Make sure power cable is Power LED does not shine; the securely plugged in. fan of the power supply does not 2. Replace cable. work 3. Contact technical support. 2. Indicator light on keyboard - Biostar N68S3B | Setup Manual - Page 29
N68S3B This page is intentionally left blank. 27 - Biostar N68S3B | Setup Manual - Page 30
Sockel AM3 Die AMD 64-Architektur unterstützt eine 32-Bit- und CPU AMD Phenom II/ Athlon II Prozessoren 64-Bit-Datenverarbeitung (Maximales Watt: 95W) Unterstützt Hyper Transport 2.0 Unterstützt HyperTransport 2.0 mit einer FSB Bandbreite von bis zu 2.0 GT/s Chipsatz GeForce 7025/nForce - Biostar N68S3B | Setup Manual - Page 31
PS/2-Tastatur x1 PS/2-Maus x1 Rückseiten-E VGA-Anschluss x1 /A LAN-Anschluss x1 USB-Anschluss x4 Audioanschluss x3 Platinengröß 170 mm (B) X 235 mm (L) e Sonderfunkti Unterstützt RAID 0 / 1 onen OS-Unterstü Windows XP / Vista / 7 tzung Biostar behält sich das Recht vor, ohne Ank - Biostar N68S3B | Setup Manual - Page 32
Manual FRENCH SPEC Socket AM3 L'architecture AMD 64 permet le calcul 32 et 64 bits UC Processeurs AMD Phenom II/ Athlon II Prend en charge Hyper Transport 2.0 (Watt maximum : 95W) Prend en charge Hyper Transport 2.0 Bus frontal jusqu'à une bande passante de 2.0 GT/s Chipset GeForce 7025 - Biostar N68S3B | Setup Manual - Page 33
PS/2 x1 Souris PS/2 x1 E/S du Port VGA x1 panneau Port LAN x1 arrière Port USB x4 Fiche audio x3 Dimension s de la 170 mm (l) X 235 mm (H) carte Fonctionnal ités Prise en charge RAID 0 / 1 spéciales Support SE Windows XP / Vista / 7 Biostar se réserve le droit d'ajouter ou de - Biostar N68S3B | Setup Manual - Page 34
Manual ITALIAN SPECIFICA CPU Socket AM3 L'architettura AMD 64 abilita la co mputazione 32 Processori AMD Phenom II/ Athlon II e 64 bit (Watt massimo: 95W) Supporto di Hyper Transport 2.0 FSB Chipset Supporto di HyperTransport 2.0 fino a 2.0 GT/s di larghezza di banda GeForce 7025 - Biostar N68S3B | Setup Manual - Page 35
PS/2 x1 I/O Porta VGA x1 pannello Porta LAN x1 posteriore Porta USB x4 Connettore audio x3 Dimension 170 mm (larghezza) x 235 mm i scheda (altezza) Caratterist iche Supporto RAID 0 / 1 speciali Sistemi operativi Windows XP / Vista / 7 supportati Biostar si riserva il diritto di - Biostar N68S3B | Setup Manual - Page 36
ón Conector AM3 La arquitectura AMD 64 permite el procesado de 32 y CPU Procesadores AMD Phenom II/ Athlon II 64 bits (Vatio máximo: 95W) Soporta las tecnologías Hyper Transport 2.0 Admite HyperTransport 2.0 con un ancho FSB de banda de hasta 2.0 GT/s Conjunto GeForce 7025/nForce 630a - Biostar N68S3B | Setup Manual - Page 37
Ratón PS/2 X1 Panel Puerto VGA X1 trasero de Puerto de red local X1 E/S Puerto USB X4 Conector de sonido X3 Tamaño de 170 mm. (A) X 235 Mm. (H) la placa Funciones Admite RAID 0 / 1 especiales Soporte de sistema Windows XP / Vista / 7 operativo Biostar se reserva el derecho de añadir - Biostar N68S3B | Setup Manual - Page 38
ÇÕES Socket AM3 A arquitectura AMD 64 permite uma computação de CPU Processadores AMD Phenom II/ Athlon II 32 e 64 bits (Watt máximo: 95W) Suporta as tecnologias Hyper Transport 2.0 Suporta a tecnologia HyperTransport 2.0 FSB com uma largura de banda até 2.0 GT/s Chipset GeForce 7025/nForce - Biostar N68S3B | Setup Manual - Page 39
x1 painel Porta LAN x1 traseiro Porta USB x4 Tomada de áudio x3 Tamanho da placa 170 mm (L) X 235 mm (A) Característi cas Suporta as funções RAID 0 / 1 especiais Sistemas A Biostar reserva-se o direito de adicionar ou remover operativos Windows XP / Vista / 7 suporte para qualquer - Biostar N68S3B | Setup Manual - Page 40
Motherboard Manual POLISH SPEC Procesor Socket AM3 AMD Phenom II/ Athlon II Procesory (Maksymalny Watt: 95W) Architektura AMD 64 umożliwia przetwarzanie 32 i 64 bitowe Obsługa Hyper Transport 2.0 Obsługa HyperTransport 2.0 o szerokości FSB pasma do 2.0 GT/s Chipset GeForce 7025/nForce 630a - Biostar N68S3B | Setup Manual - Page 41
PS/2 x1 Mysz PS/2 x1 Back Panel Port VGA x1 I/O Port LAN x1 Port USB x4 Gniazdo audio x3 Wymiary płyty 170 mm (S) X 235 mm (W) Funkcje specjalne Obsługa RAID 0 / 1 Obsluga systemu Windows XP / Vista / 7 operacyjne go Biostar zastrzega sobie prawo dodawania lub odwoływania obsługi - Biostar N68S3B | Setup Manual - Page 42
Motherboard Manual RUSSIAN СПЕЦ CPU AM3 ный AMD Phenom II/ Athlon II 95W) ) AMD 64 32 и 64 Hyper Transport 2.0 HyperTransport 2.0 с FSB 2.0 GT/s Набор GeForce 7025/nForce 630a Слоты DDR3 DIMM x 2 DDR3 8 ГБ память DIMM DDR3 800 / 1066 / 1333 512МБ/1ГБ/ - Biostar N68S3B | Setup Manual - Page 43
CMOS x1 USB 2 USB x2 24 вывод) x1 4 вывод) x1 1 x1 PS/2 x1 PS/2 x1 панель Порт VGA x1 LAN x1 USB-порт x4 ода x3 170 мм (Ш) X 235 мм (В) ые RAID 0 / 1 ие стики Windows XP / Vista / 7 а OS Biostar OS 41 - Biostar N68S3B | Setup Manual - Page 44
Motherboard Manual ARABIC 32و 64ﺑﺖAMD 64 Hyper Transport2.0 LowPin Count Interface ITE Smart Guardian AM3 AMD Phenom II/ Athlon II )و: 95 2.0 GT/s HyperTransport 2.0 GeForce 7025/nForce 630a ITE 8728 Super I/O Super I/O DDR3 1333 - Biostar N68S3B | Setup Manual - Page 45
N68S3B Smart Fan 1 1 1 CMOS USB 2 USB 1 24 1 4 1 1 PS/2 1 PS/2 1 VGA 1 4 USB ﻋﺪ3 170 235 X RAID 0 / 1 Biostar Windows XP / Vista / - Biostar N68S3B | Setup Manual - Page 46
Motherboard Manual JAPANESE 仕様 Socket AM3 AMD 64 32ビットと64 CPU AMD Phenom II/ Athlon II 能です 95W) 2.0 2.0 GT/s FSB ート2.0 GeForce 7025/ ITE GeForce 7025 クス 512 Bです IDE 統合IDE Ultra DMA 33 / 66 / 100 / 133 PIO Mode 0~4 SATA ATA 最高3Gb SATA 2.0 LAN - Biostar N68S3B | Setup Manual - Page 47
CPU CMOS USBコネクタ 24ピン) 4ピン) PS/2 PS/2マウス VGAポート I/O LANポート USBポート 170 mm (幅) X 235 mm (高さ) ズ RAID 0 / 1 OS Windows XP / Vista / 7 N68S3B 仕様 x1 x1 CPU x1 x1 2 USB x2 ます x1 x1 x1 1 x1 x1 x1 x1 x4 x3 Biostar OS 2010/11/12 45
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
 |
 |
N68S3B Setup Manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.
Dichiarazione di conformità
sintetica
Ai sensi dell’art. 2 comma 3 del D.M.
275 del 30/10/2002
Si dichiara che questo prodotto è
conforme alle normative vigenti e
soddisfa i requisiti essenziali richiesti
dalle direttive
2004/108/CE, 2006/95/CE e
1999/05/CE
quando ad esso applicabili
Short Declaration of conformity
We declare this product is complying
with the laws in force and
meeting all
the essential requirements as specified
by the directives
2004/108/CE, 2006/95/CE and
1999/05/CE
whenever these laws may be applied