Biostar P4TDP P4TDP user's manual
Biostar P4TDP Manual
 |
View all Biostar P4TDP manuals
Add to My Manuals
Save this manual to your list of manuals |
Biostar P4TDP manual content summary:
- Biostar P4TDP | P4TDP user's manual - Page 1
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no The content of this user's is subject to be changed without notice and we will not be responsible for any mistakes found in this user's manual. All the brand - Biostar P4TDP | P4TDP user's manual - Page 2
10 Contenido del Paquete...11 Disposición del P4TDP 11 Instalación de la CPU ...12 Módulos DDR DIMM: DDR1-2 13 Puentes, Cabezales, Conectores y Ranuras 14 WARPSPEEDER 19 Introduction...19 System Requirement...20 Installation...20 Usage...22 TROUBLE SHOOTING 30 SOLUCIÓN DE PROBLEMAS 31 ii - Biostar P4TDP | P4TDP user's manual - Page 3
P4TDP Features Use Intel 845D/ ICH2 Chipset, ITE IT8712. Contains on board I/O facilities, which include two serial port, a parallel port, a PS/2 mouse port, a PS/2 keyboard port, audio ports, USB ports, a game port . Supports the Intel Pentium 4® (Socket 478) processor up to 2.4GHz. Supports - Biostar P4TDP | P4TDP user's manual - Page 4
Package contents HDD Cable X 1, FDD Cable X 1, Fully Setup Driver CD X 1 USB Cable X 2 (Optional) Layout of P4TDP JKBMS1 K/B & Mouse JUSB1 JKBV1 JATXPWR2 JUSBV1 JCOM1 JPRNT1 I/O JCFAN1 1 DDR 1 DDR 2 COM1 Parallel Port Socket 478 JCOM2 JGAME1 MIC-IN LINE-IN SP-OUT GAME Port 2 JUSB4 JUSBV4 - Biostar P4TDP | P4TDP user's manual - Page 5
up to 90-degree angle. 2. Locate Pin A in the socket and lock for the white dot or cut edge in the CPU. Match Pin A with the white dot/cut edge then insert the CPU. 3. Press the lever down. Then Put the fan on the CPU and buckle it and put the fan's power port - Biostar P4TDP | P4TDP user's manual - Page 6
Modules: DDR1-2 DRAM Access Time: 2.5V Unbuffered DDR 200/266 MHz Type required x16 not support . DRAM Type: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM Module (184 pin) DIMM Socket Location DDR Module Total Memory Size (MB) DDR 1 64MB/128MB/256MB/512MB/1GB *1 Max is DDR 2 64MB/128MB/256MB/512MB - Biostar P4TDP | P4TDP user's manual - Page 7
CODEC is onboard, then the CNR slot only support slave card. But if the H/W Audio is onboard, then the CNR slot support only primary card . ) Accelerated Graphics Port Slot: AGP1 Unlike the mouse ports, keyboard ports and printer ports this motherboard does not have built in video facilities and - Biostar P4TDP | P4TDP user's manual - Page 8
Power Connectors: JATXPWR1/ JATXPWR2 JATXPWR2 (ATX 12V Power Conn.) JATXPWR1 (ATX Main Power Conn.) DIMM Power Selection Connector: JDIMMVOLT1 (Optional) 2 1 JDIMMVOLT (Default ==> 2.5V) Jump Open==> 2.5V Pin 1-2 on ==> 2.6V Pin 3-4 on ==> 2.7V Pin 5-6 on ==> 2.8V Pin 7-8 on ==> 2.9V It - Biostar P4TDP | P4TDP user's manual - Page 9
USB1.1, but after adding an USB2.0 chip, JUSB1/4(white) supports USB2.0. Having an USB2.0 chip, JUSB1/4(white) supports USB2.0 and JUSB2/3 only supports USB1.1. 5V/ 5VSB Selection for USB: JUSBV1/2_3 / JUSBV4(Optional) 1 Pin 1-2 on ==> 5V JUSBV1/2_3/4 Pin 2-3 on ==> 5V_SB 5V/ 5VSB Selection - Biostar P4TDP | P4TDP user's manual - Page 10
) 1 Pin 1-2 ==> on J1 Pin 2-3 ==> off When VT6202 support 5V/5VSB Selection for USB WAKE-UP in on mode, JUSB1 and JUSB4 will change to 5V_SB Audio Subsystem: JAUDIO1/ JCDIN1 2 1 1 JAUDIO1 JCDIN1 (Front Audio Header) (CD-ROM Audio-In Header) Front Panel Connector: JPANEL1 PWR_LED SLP - Biostar P4TDP | P4TDP user's manual - Page 11
1 Pin 1-2 on ==> Normal Operation (default) JCMOS1 Pin 2-3 on ==> Clear CMOS Data Back Panel Connectors JKBMS1 PS/2 Mouse JPRNT1 JGAME1 Game Port PS/2 USB COM1 Mic Keyboard JCOM1 JCOM2 In 4 Ch an nel Speakers 6 Ch an n el Speakers Speaker Out Line In/ Mic In Rear Speaker Speaker - Biostar P4TDP | P4TDP user's manual - Page 12
un puerto para teclado PS/2, puertos de audio, puertos USB y un puerto de juego . Soporta procesadores Intel Pentium 4® (Socket 478) de hasta 2.4GHz. Soporta Ultra 100 Windows 98, Windows NT, Windows 2000, Windows ME, Windows XP, LINUX y SCO UNIX. Corriente de Selección DIMM para configuración BIOS - Biostar P4TDP | P4TDP user's manual - Page 13
Cable HDD X 1, Cable FDD X 1, Configuración Completa del Driver CD X 1 Cable USB X 2 (Opcional) Disposición del P4TDP JKBMS1 Teclado & Raton JUSB1 JKBV1 JATXPWR2 JUSBV1 JCOM1 JPRNT1 I/O JCFAN1 1 DDR 1 DDR 2 COM1 Puerto Paralelo Socket 478 JCOM2 JGAME1 Entrada Entrada Salida del del MIC - Biostar P4TDP | P4TDP user's manual - Page 14
contacto A del zócalo y busque el punto blanco o corte el borde en la CPU. Empareje el contacto A con el punto blanco/ corte del borde, luego inserte la CPU. 3. Presione la palanca para abajo. Ponga el ventilador en la CPU y abróchelo. Luego ponga el puerto de corriente del ventilador en el JCFAN1 - Biostar P4TDP | P4TDP user's manual - Page 15
Módulos DDR DIMM: DDR1-2 DRAM Tiempo de Acceso: 2.5V Unbuffered DDR 200/266 MHz no soporta Tipo requerido x16. DRAM Tipo: 64MB/ 128MB/ 256MB/ 512MB/ 1GB Módulos DIMM (184 contactos) Localización del Zócalo DIMM DDR 1 DDR 2 Módulo DDR Total del Tamaño de Memoria (MB) 64MB/128MB/256MB/512MB/1GB - Biostar P4TDP | P4TDP user's manual - Page 16
ón CNR es una abierta Industria de Arquitectura Estándar, que define una tarjeta de interface escalable del hardware en el que soporta solamente audio, network y modem (solamente tarjeta esclava). (Cuando la función CODEC está integrado en la placa madre, la ranura CNR solamente soporta a la tarjeta - Biostar P4TDP | P4TDP user's manual - Page 17
Conectores de Corriente: JATXPWR1/ JATXPWR2 JATXPWR2 (ATX 12V Conector de Corriente) JATXPWR1 (ATX Conector de Corriente Principal) Conector de Selección de la Corriente DIMM: JDIMMVOLT1 (Opcional) 2 1 JDIMMVOLT (Default ==> 2.5V) Puente Abierto==> 2.5V Contacto 1-2 on ==> 2.6V Contacto 3-4 on - Biostar P4TDP | P4TDP user's manual - Page 18
) soporta USB2.0. Teniendo un chip USB2.0, JUSB1/4(de color blanco) soporta USB2.0 y JUSB2/3 solamente soporta USB1.1. 5V/ 5VSB Selección para USB: JUSBV1/2_3 / JUSBV4(Opcional) 1 Contacto 1-2 on ==> 5V Contacto 2-3 on ==> 5V_SB JUSBV1/2_3/4 5V/ 5VSB Selección para KB: JKBV1 1 Contacto 1-2 on - Biostar P4TDP | P4TDP user's manual - Page 19
J1 Contacto 2-3 ==> off Cuando VT6202 soporta 5V/5VSB Selección para USB WAKE-UP en modo on, JUSB1 y JUSB4 cambiará a 5V_SB Subsistema de Audio: JAUDIO1/ JCDIN1 2 1 JAUDIO1 (Cabezal Frontal de Audio) 1 JCDIN1 (Cabezal de Entrada de Audio CD-ROM) Conector del Panel Frontal: JPANEL1 PWR_LED SLP - Biostar P4TDP | P4TDP user's manual - Page 20
) JCMOS1 Contacto 2-3 on ==> Borrar Datos CMOS Conectores del Panel Trasero JKBMS1 Raton PS/2 JUSB1 JPRNT1 Paralelo JGAME1 Puerto de Juego Teclado USB PS/2 COM1 JCOM1 COM2 JCOM2 Salida del Entrada Entrada Altavoz de Linea del MIC Altavoz de 4 Canales Altavoz de 6 Canales Salida del - Biostar P4TDP | P4TDP user's manual - Page 21
, in the About panel, you can get detail descriptions about BIOS model and chipsets. In addition, the frequency status of CPU, memory, AGP and PCI along with the CPU speed are synchronically shown on our main panel. Moreover, to protect users' computer systems if the setting is not appropriate when - Biostar P4TDP | P4TDP user's manual - Page 22
System Requirement OS Support: Windows 98 SE, Windows Me, Windows 2000, Windows XP DirectX: DirectX 8.1 or above. (The Windows XP operating system includes DirectX 8.1. If you use Windows XP, you do not need to install DirectX 8.1.) Installation 1. Execute the setup execution file, and then the - Biostar P4TDP | P4TDP user's manual - Page 23
2. When you see the following dialog in setup procedure, it means setup is completed. If the "Launch the WarpSpeeder Tray Utility" checkbox is checked, the Tray Icon utility and [ WarpSpeeder™ ] utility will be automatically and immediately launched after you click "Finish" button. 21 - Biostar P4TDP | P4TDP user's manual - Page 24
the screen printed in this usr manual will change according to your motherboard on hand. [ WarpSpeeder™ ] includes 1 tray icon and 5 panels: 1. Tray Icon: Whenever the Tray Icon utility is launched, it will display a little tray icon on the right side of Windows - Biostar P4TDP | P4TDP user's manual - Page 25
utility will be invoked. Please refer do the following figure; the utility's first window you will see is Main Panel. Main Panel contains features as follows: a. Display the CPU Speed, CPU external clock, Memory clock, AGP clock, and PCI clock information. b. Contains About, Voltage, Overclock, and - Biostar P4TDP | P4TDP user's manual - Page 26
will be highlighted and the Voltage Panel will slide out to up as the following figure. In this panel, you can decide to increase CPU core voltage and Memory voltage or not. The default setting is "No". If you want to get the best performance of overclocking, we recommend you click the - Biostar P4TDP | P4TDP user's manual - Page 27
contains the these features: a. "-3MHz button", "-1MHz button", "+1MHz button", and "+3MHz button": provide user the ability to do real-time overclock adjustment. Warning: Manually overclock is potentially dangerous, especially when the overclocking percentage is over 110 %. We strongly recommend - Biostar P4TDP | P4TDP user's manual - Page 28
d. "Verify button": User can click this button and [ WarpSpeeder™ ] will proceed a testing for current frequency. If the testing is ok, then the current frequency will be saved into - Biostar P4TDP | P4TDP user's manual - Page 29
, you can get model name and detail information in hints of all the chipset that are related to overclocking. You can also get the mainboard's BIOS model and the Version number of [ WarpSpeeder™ ] utility. 27 - Biostar P4TDP | P4TDP user's manual - Page 30
28 - Biostar P4TDP | P4TDP user's manual - Page 31
Note: Because the overclock, overvoltage, and hardware monitor features are controlled by several separate chipset, [ WarpSpeeder™ ] divide these features to separate panels. If one chipset is not on board, the correlative button in Main panel will be disabled, but will not interfere other panels' - Biostar P4TDP | P4TDP user's manual - Page 32
Trouble Shooting PROBABLE SOLUTION No power to the system at all Power light don't * Make sure power cable is securely plugged in illuminate, fan inside on. Indicator light on power supply does not keyboard does not turn turn on * Replace cable * Contact technical support PROBABLE - Biostar P4TDP | P4TDP user's manual - Page 33
Solución de Problemas CAUSA PROBABLE SOLUCIÓN No hay corriente en el sistema. La luz de * Asegúrese que el cable de transmisión esté corriente no ilumina, ventilador dentro de la seguramente enchufado. fuente de alimentación apagada. luz del teclado apagado. Indicador de * Reemplace el cable - Biostar P4TDP | P4TDP user's manual - Page 34
07/31/2002 32
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
 |
 |
P
P
P
4
4
4
T
T
T
D
D
D
P
P
P
i
FCC Statement and Copyright
This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. There is no guarantee that interference will not occur in a
particular installation.
The vendor makes no representations or warranties with respect to the
contents here of and specially disclaims any implied warranties of
merchantability or fitness for any purpose. Further the vendor reserves the
right to revise this publication and to make changes to the contents here of
without obligation to notify any party beforehand.
Duplication of this publication, in part or in whole is not allowed without
first obtaining the vendor’s approval in writing.
The content of this user’s is subject to be changed without notice and we
will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.