Biostar P4TDP P4TDP BIOS setup guide

Biostar P4TDP Manual

Get Biostar P4TDP PDF manuals and user guides View all Biostar P4TDP manuals
Add to My Manuals
Save this manual to your list of manuals

Biostar P4TDP manual content summary:

  • Biostar P4TDP | P4TDP BIOS setup guide - Page 1
    P4TDP BIOS Setup BIOS Setup 1 1 Main Menu 3 2 Standard CMOS Features 6 3 Advanced BIOS Features 9 4 Advanced Chipset Features 12 5 Integrated Peripherals 15 6 Power Management Setup 20 7 PnP/PCI Configurations 24 8 PC Health Status 27 9 Frequency Control 29 i
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 2
    ™ installed in your computer system's ROM (Read Only Memory) is a custom version of an industry standard BIOS. This means that it supports Intel Pentium ® 4 processor input/output system. The BIOS provides critical low-level support for standard devices such as disk drives and serial and parallel
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 3
    P4TDP BIOS Setup PCI Bus Support This AWARD BIOS also supports Version 2.1 of the Intel PCI (Peripheral Component Interconnect) local bus specification. DRAM Support DDR DRAM (Double Data Rate Synchronous DRAM) are supported. Supported CPUs This AWARD BIOS supports the Intel Pentium ® 4 CPU. Using
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 4
    P4TDP BIOS Setup 1 Main Menu Once you enter Award BIOS™ CMOS Setup Utility, the Main Menu will appear sub-menu. !! WARNING !! The information about BIOS defaults on manual (Figure 1,2,3,4,5,6,7,8,9) is just for reference, please refer to the BIOS installed on board, for update information. ! Figure
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 5
    P4TDP BIOS CPU or M/B damage!) Load Optimized Defaults This selection allows you to reload the BIOS when the system is having problems particularly be prompted with to enter a password. Set User Password If the Supervisor Password is not set, then the User Password will function in the same way as
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 6
    all configuration changes to CMOS(memory) and exit setup. Confirmation message will be displayed before proceeding. Exit Without Saving Abandon all changes made during the current session and exit setup. Confirmation message will be displayed before proceeding. Upgrade BIOS This submenu allows you
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 7
    P4TDP BIOS Setup 2 Standard CMOS Features The items in Standard CMOS Setup Menu are divided into 10 categories. Each category includes no, one or more than one
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 8
    P4TDP BIOS Setup Main Menu Selections This table shows the selections that you can make on the Main Menu. Item Options Description Date mm : dd : yy Set
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 9
    P4TDP BIOS Setup Item Halt On Base Memory Extended Memory Total Memory Options All Errors No Errors All, but Keyboard All, but Diskette All, but Disk/ Key N/A N/A N/A Description Select the situation in which you want the BIOS to stop the POST process and notify you. Displays the amount of
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 10
    IDE Hard Disk boot sector. If this function is enabled and an attempt is made to write to the boot sector, BIOS will display a warning message on the screen and sound an alarm beep. Enabled Disabled (default) Virus protection is activated. Virus protection is disabled. Quick Power On Self Test
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 11
    P4TDP BIOS Setup First /Second/Third/ Boot Other Device These BIOS attempt to load the operating system from the devices in the sequence selected in these items. The Choices: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2,
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 12
    P4TDP BIOS BIOS supports version 1.1 and 1.4 of the Intel multiprocessor specification. Select version supported by the operation system running on this computer. The Choices: 1.4 (default), 1.1. OS Select For DRAM > 64MB A choice other than Non-OS2 is only used for OS2 systems with memory
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 13
    P4TDP BIOS Setup 4 Advanced Chipset Features This submenu allows you to configure the specific features of the chipset installed on your system. This chipset manage bus speeds and access to system memory timing. The Choices: By SPD (default), Manual. CAS Latency Time When synchronous DRAM is
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 14
    P4TDP BIOS Setup Active to Precharge Delay This item controls the number of DRAM clocks Data Integrity Mode This item select supported ECC or Non-ECC for DRAM. The Choices: Non-ECC (default), ECC. Memory Frequency (Host:DRAM) This item allows you to select the Memory Frequency(Host:DRAM). The Choices
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 15
    P4TDP BIOS Setup Memory Hole At 15M-16M You can reserve this area of system memory for ISA adapter ROM. When this area is reserved it cannot be cached. The user information of peripherals that need to use this area of system memory usually2 discussed their memory requirements. The Choices: Disabled
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 16
    P4TDP BIOS Setup 5 Integrated Peripherals ! Figure 5. Integrated Peripherals IDE DMA transfer access The Choices: Enabled (default), Disabled. On-Chip Primary / Secondary PCI IDE The integrated peripheral controller contains an IDE interface with support for two IDE channels. Select Enabled to
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 17
    your operating environment requires a DMA driver (Windows 95 OSR2 or a third party IDE bus master driver). If your hard drive and your system software both support Ultra DMA/100, select Auto to enable BIOS support. The Choices: Auto (default), Disabled. OnBoard CMI Audio This item select to Enable
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 18
    P4TDP BIOS Setup POWER ON Function This item allows you to Power on the system by Keybord and Mouse . The Choices: Password , Hot KEY , Mouse Move , Mouse
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 19
    P4TDP BIOS Setup Onboard Parallel Port This item allows you to determine access had lost power previously without any subsequent manual intervention. There are 3 sources that provide current to the CMOS area that retains these Power-On instructions; the motherboard battery (3V), the Power Supply
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 20
    P4TDP BIOS Setup Game Port Address Game Port I/O Address. The Choices: 201 (default), 209, Disabled. Midi Port Address Midi Port Base I/O Address. The Choices: 330 (default), 300, Disabled. Midi Port IRQ This determines the IRQ in which the Midi Port can use. The Choices: 10 (default), 5. 19
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 21
    P4TDP BIOS Setup 6 Power Management Setup The Power BIOS to initialize the VGA card when system wakes up from S3 state . The system time is shortened if you disable the function , but system will need AGP driver to initialize the card . So , if the AGP driver of the VGA card does not support
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 22
    P4TDP BIOS Setup after S3 . The Choices:Auto (default), Yes, No. Power = 15 min Max Saving Maximum power management only available for sl CPU's. Doze Mode = 1 min Standby Mode = 1 min. Suspend Mode = 1 min. HDD Power Down = 1 min. User Defined (default) Allows you to set each mode individually. When
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 23
    P4TDP BIOS Setup Initial display power management signaling. Video Off In 9 / 10 / 11 / NA Suspend Mode When enabled and after the set time of system inactivity, all devices except the CPU will be shut off. The Choices: Disabled (default), 1Min, 2Min, 4Min, 8Min, 12Min, 20Min, 30Min, 40Min, 1Hour.
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 24
    P4TDP BIOS Setup Wake Up On LAN To use this function, you need a LAN add-on card which support power on function. It should also support the wake-up on LAN jumper. The Choices: Enabled, Disabled(default). Resume by Alarm This function is for setting date and time for your computer
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 25
    covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings. ! Figure 7. PnP/PCI Configurations Reset Configuration Data The system BIOS supports the PnP feature which requires the system to record which resources are
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 26
    P4TDP BIOS Setup The above settings will be shown on the screen only if "Manual" is chosen for the resources (default), the system BIOS will detect the system resources and automatically assign the relative IRQ and DMA channel for each peripheral.By Choosing "Manual", the user will need to assign
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 27
    P4TDP BIOS Setup PCI / VGA Palette Snoop Choose Disabled or Enabled. Some graphic controllers which are not VGA compatible take the output from a VGA controller and map
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 28
    P4TDP BIOS Setup 8 PC Health Status ! Figure 8. PC Health Status Shutdown Temperature This item allows you to set up the CPU shutdown Temperature. This item only effective under Windows 98 ACPI mode. The Choices: 60OC/140OF, 65OC/149OF, 70OC/158OF, 75OC/167OF(default). CPU Vore/AGP Voltage/+3.3V/+-
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 29
    P4TDP BIOS Setup Current CPU FAN Speed This field displays the current CPUFAN speed. Show H/W Monitor in POST If you computer contain a monitoring system, it will show PC health status
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 30
    P4TDP BIOS Setup 9 Frequency Control ! Figure 9. Frequency Control CPU Clock Ratio This item allows you to select the CPU Ratio. CPU Voltage This item allows you to select CPU Voltage Regulator. The Choices: Default (default), +1.7％, +3.45％, +5.1％. Clock by Slight Adjust This item allows you to
  • Biostar P4TDP | P4TDP BIOS setup guide - Page 31
    P4TDP BIOS Setup If unfortunately, the system's frequency that you are selected is not This action will boot-up the system according to FSB of the processor. ※ It's strongly recommended to set CPU Vcore and clock in default setting. If the CPU Vcore and clock are not in default setting, it may cause
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
P4TDP BIOS Setup
i
BIOS Setup
.......................................................................................
1
1 Main Menu
...................................................................................................
3
2 Standard CMOS Features
.............................................................................
6
3 Advanced BIOS Features
.............................................................................
9
4 Advanced Chipset Features
........................................................................
12
5 Integrated Peripherals
.................................................................................
15
6 Power Management Setup
..........................................................................
20
7 PnP/PCI Configurations
..............................................................................
24
8 PC Health Status
.........................................................................................
27
9 Frequency Control
......................................................................................
29