Biostar P4TGE P4TGE user's manual

Biostar P4TGE Manual

Biostar P4TGE manual content summary:

  • Biostar P4TGE | P4TGE user's manual - Page 1
    radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that for any mistakes found in this user's manual. All the brand and product names are trademarks of their respective companies. i
  • Biostar P4TGE | P4TGE user's manual - Page 2
    : DDR1-2 6 Jumpers, Headers, Connectors & Slots 7 ESPAÑOL 15 Características del P4TGE 15 Contenido del Paquete...17 Disposición del P4TGE 18 Instalación de la CPU ...19 Módulos DDR DIMM: DDR1-2 20 Puentes, Cabezales, Conectores y Ranuras 21 TROUBLE SHOOTING 29 SOLUCIÓN DE PROBLEMAS 30 ii
  • Biostar P4TGE | P4TGE user's manual - Page 3
    English P4TGE Features Use Intel 845GE/ ICH4 Chipset, Winbond W83627, 1394A Chip, SATA/ RAID Chip (Optional). Contains on board I/O facilities, which include one serial port, one VGA port, a parallel port, a PS/2 mouse port, a PS/2 keyboard port, audio ports, USB ports and a game port . Supports the
  • Biostar P4TGE | P4TGE user's manual - Page 4
    Features (Optional): 6CH DAC for AC3® 5.1CH purpose. HRTF-based 3D positional audio, supporting DirectSound™ 3D and A3D™ interface. Supports 4.1/5.1 speakers, C3DX positional audio in 4/ 6 CH speaker mode. Serial ATA-Raid Features (Optional): Single chip, high performance SATA-RAID implementation
  • Biostar P4TGE | P4TGE user's manual - Page 5
    MMootthheerrbbooaarrdd DDeessccrriippttiioonn Package contents HDD Cable X 1 FDD Cable X 1 Fully Setup Driver CD X 1 USB Cable X 2 (Optional) IEEE1394 Cable X1 (Optional) Serial ATA Cable X1 (Optional) SPDIF OUT Cable X1 (Optional). 3
  • Biostar P4TGE | P4TGE user's manual - Page 6
    MMootthheerrbbooaarrdd DDeessccrriippttiioonn Layout of P4TGE JKBMS1 KB & Mouse JUSBLAN1 USB & 9 1 JUSBV3_4 ICH4 IDE2 IDE1 JSFAN1 1 1 JCDIN1 PCI3 PCI4 JSPDIF_OUT 1 PCI SLOT PCI SLOT Hardware Audio PCI5 PCI SLOT CNR1 CNR SLOT JWOL1 2 10 1 19 J1394A1 2 10 J1394B1 19 Winbond I/O JCMOS1
  • Biostar P4TGE | P4TGE user's manual - Page 7
    MMootthheerrbbooaarrdd DDeessccrriippttiioonn CPU Installation CPU 1. Pull the lever sideways away from the socket then raise the lever up to 90-degree angle. 2. Locate Pin A in the socket and lock for the white dot or cut edge in the CPU. Match Pin A with the white dot/cut edge then insert the
  • Biostar P4TGE | P4TGE user's manual - Page 8
    DDR200/266/333 unregistered 184-pin non-ECC DDR SDRAM DIMMs. Does not support double-size x16 DDR DIMMs. DRAM Type: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM Module (184 pin) DIMM Socket Location DDR Module Total Memory Size (MB) DDR 1 64MB/128MB/256MB/512MB/1GB *1 Max is DDR 2 64MB/128MB/256MB
  • Biostar P4TGE | P4TGE user's manual - Page 9
    support additional IDE devices. However, it can only support master mode IDE HDD. Floppy Disk Connector: FDD1 The motherboard provides a standard floppy disk connector that supports it defines a hardware scalable riser card interface, which supports audio, network and modem only (slave card only) .
  • Biostar P4TGE | P4TGE user's manual - Page 10
    MMootthheerrbbooaarrdd DDeessccrriippttiioonn Accelerated Graphics Port Slot: AGP1 Your monitor will attach directly to that video card. This motherboard supports video cards for PCI slots, but it is also equipped with an Accelerated Graphics Port (AGP). An AGP card will take advantage of AGP
  • Biostar P4TGE | P4TGE user's manual - Page 11
    MMootthheerrbbooaarrdd DDeessccrriippttiioonn Front USB Header: JUSB3/ JUSB4 2 1 JUSB3/ 4 Pin Assignment Pin Assignment 1 +5V 2 +5V 3 Data (-) 4 Data (-) 5 Data (+) 6 Data (+) 7 Ground 8 Ground 9 Key 10 NA 5V/ 5VSB Selection for USB: JUSBV1/ JUSBV3_4 JUSBV1/ 3_4 Assignment 1 5V Pin
  • Biostar P4TGE | P4TGE user's manual - Page 12
    9 KEY 10 NA Serial ATA Connector: JSATA1/ JSATA2 (Optional) 14 7 23 56 JSATA1/2 Pin Assignment Pin Assignment 1 Ground 2 TX+ 3 TX- 4 Ground 5 RX- 6 RX+ 7 Ground Digital Audio Connector: JSPDIF_OUT SPDIF_Out GND 5V 1 JSPDIF_OUT 10
  • Biostar P4TGE | P4TGE user's manual - Page 13
    Header) 22 1 14 13 JAUDIO1 Pin Assignment Pin Assignment 1 Mic In 2 Ground 3 Mic Power 4 Audio Power 5 RT Line Out 6 RT Line Out 7 Reserved 8 Key 9 LFT Line Out 10 LFT Line Out 11 RT Line In 12 RT Line In 13
  • Biostar P4TGE | P4TGE user's manual - Page 14
    3 5 7 246 Pin 5 and 6 Pin 9 and 10 9 10 Pin11 and 12 11 12 Pin13 and 14 13 14 Configuration Audio line out signals are routed to the back panel audio line out connector. 12 3 5 4 6 No jumpers 7 9 10 installed 11 12 13 14 Audio line out and mic in signals are available for front panel
  • Biostar P4TGE | P4TGE user's manual - Page 15
    Front Panel Connector: JPANEL1 PWR_LED SLP (+) (+) (-) ON/OFF IR 2 24 1 23 SPK SPK (+) (-) RST IR HLED ==> Speaker Conn. HLED ==> Hard Driver LED RST ==> Reset Button IR ==> Infrared Conn. SLP ==> Sleep Button PWR_LED ==> Power LED ON/ OFF ==> Power-on Button Back Panel
  • Biostar P4TGE | P4TGE user's manual - Page 16
    MMootthheerrbbooaarrdd DDeessccrriippttiioonn 4 Ch an nel Speakers 6 Ch an n el Speakers Speaker Out Line In/ Mic In Rear Speaker Speaker Out Line In/ Mic In/ Center & Bass Rear Speaker 14
  • Biostar P4TGE | P4TGE user's manual - Page 17
    del P4TGE Usa Chipset Intel 845GE/ ICH4, Winbond W83627, Chip 1394A, Chip SATA/ RAID (Opcional). Contiene facilidades I/O integrados en la placa madre en el que incluye un puerto en serie, un puerto VGA, un puerto paralelo, un puerto para ratón PS/2, un puerto para teclado PS/2, puertos de audio
  • Biostar P4TGE | P4TGE user's manual - Page 18
    Audio (Opcional): 6CH DAC para AC3® 5.1CH purpose. HRTF-based 3D audio posicional, soportando DirectSound™ 3D y A3D™ de interface. Soporta altavoces de 4.1/5.1, C3DX audio 1, 2, 3, 4, Ultra DMA Modo 0,1, 2, 3, 4, 5, 6. El driver IDE transfiere rate que es capable de hasta 150 MB/sec. Automáticamente
  • Biostar P4TGE | P4TGE user's manual - Page 19
    modo 3, 4, 5, 6 de Ultra DMA. Compatible con PC2000, requerimientos WHQL hardware. Contenido del Paquete Cable HDD X 1 Cable FDD X 1 Configuración Completa del Driver CD X 1 Cable USB X 2 (Opcional) Cable IEEE1394 X1 (Opcional) Cable Serial ATA X1 (Opcional) Cable SPDIF OUT X1 (Opcional) 17
  • Biostar P4TGE | P4TGE user's manual - Page 20
    MMootthheerrbbooaarrdd DDeessccrriippttiioonn Disposición del P4TGE JKBMS1 Teclado & Raton JUSBLAN1 USB & LAN 1 845GE LAN Chip 2 1 14 13 PCI1 JAUDIO1 Codec PCI2 1 JCDIN1 PCI3 PCI4 JSPDIF_OUT 1 Hardware Audio PCI5 CNR1 JWOL1 2 10 1 19 J1394A1 2 10 J1394B1 19 JUSB4 JUSB3 2 10 2 10
  • Biostar P4TGE | P4TGE user's manual - Page 21
    MMootthheerrbbooaarrdd DDeessccrriippttiioonn Instalación de la CPU CPU 1. Tire de la palanca del lado del zócalo, luego levante la palanca hasta un ángulo de 90 grados. 2. Sitúe el contacto A del zócalo y busque el punto blanco o corte el borde en la CPU. Empareje el contacto A con el punto
  • Biostar P4TGE | P4TGE user's manual - Page 22
    MMootthheerrbbooaarrdd DDeessccrriippttiioonn Módulos DDR DIMM: DDR1-2 Soporta DDR200/266/333 unregistered 184-contactos sin ECC DDR SDRAM DIMMs. No soporta DDR DIMMs x16 de doble cara. DRAM Tipo: 64MB/ 128MB/ 256MB/ 512MB/ 1GB Módulos DIMM (184 contactos) Localización Módulo DDR Total del del
  • Biostar P4TGE | P4TGE user's manual - Page 23
    ón CNR es una abierta Industria de Arquitectura Estándar, que define una tarjeta de interface escalable del hardware en el que soporta solamente audio, network y modem (solamente tarjeta esclava). (Cuando la función CODEC está integrado en la placa madre, la ranura CNR solamente soporta a la tarjeta
  • Biostar P4TGE | P4TGE user's manual - Page 24
    un Puerto Acelerado para Gráficos. Ésta tarjeta AGP tomará ventaja de la tecnología del AGP para el mejoramiento de la eficiencia y funcionamiento del video, especialmente con gráficos 3D. Ranura de Interconexión del Componente Periférico: PCI1-5 Ésta placa madre está equipada con 5 ranuras estándar
  • Biostar P4TGE | P4TGE user's manual - Page 25
    MMootthheerrbbooaarrdd DDeessccrriippttiioonn Cabezal Frontal USB: JUSB3/ JUSB4 2 1 JUSB3/ 4 Contactos Asignacion 1 +5V 3 Data (-) 5 Data (+) 7 Tierra 9 Key Contactos 2 4 6 8 10 Asignacion +5V Data (-) Data (+) Tierra NA 5V/ 5VSB Selección para USB: JUSBV1/ JUSBV3_4 JUSBV1/ 3_4
  • Biostar P4TGE | P4TGE user's manual - Page 26
    NA Conector Serial ATA: JSATA1/ JSATA2 (Opcional) 14 7 23 56 JSATA1/2 Pin Asignacion Pin Asignacion 1 Ground 2 TX+ 3 TX- 4 Ground 5 RX- 6 RX+ 7 Ground Conector Digital de Audio: JSPDIF_OUT SPDIF_Out GND 5V 1 JSPDIF_OUT 24
  • Biostar P4TGE | P4TGE user's manual - Page 27
    )io CD-ROM) 22 14 1 13 JAUDIO1 Contactos 1 3 5 7 9 11 13 Asignacion Contactos Asignacion Entrada del MIC 2 Tierra Corriente del MIC 4 Corriente de Audio RT Salida de Linea 6 RT Salida de Linea Reservado 8 Key LFT Salida de Linea 10 LFT Salida de Linea RT Entrada de Linea 12
  • Biostar P4TGE | P4TGE user's manual - Page 28
    line out connector. 12 3 5 7 9 46 No jumpers 10 installed 11 12 13 14 Audio line out and mic in signals are available for front panel audio connectors. Puente de Borrar CMOS: JCMOS1 JCMOS1 1 Contacto 1-2 on 1 Contacto 2-3 on Asignacion Operacion Normal (Default) Borrar Datos CMOS 26
  • Biostar P4TGE | P4TGE user's manual - Page 29
    MMootthheerrbbooaarrdd DDeessccrriippttiioonn Conector del Panel Frontal: JPANEL1 PWR_LED SLP (+) (+) (-) ON/OFF IR 2 24 1 23 (+) (-) SPK RST IR HLED SPK HLED RST IR ==> Conector de Altavoz ==> LED del Disco Duro ==> Boton de Reinicio ==> Conector Infrarojo SLP ==> Boton de
  • Biostar P4TGE | P4TGE user's manual - Page 30
    MMootthheerrbbooaarrdd DDeessccrriippttiioonn Altavoz de 4 Canales Altavoz de 6 Canales Salida del Altavoz Entrada de Entrada Linea/ del Mic Rear Speaker Salida del Altavoz Entrada de Linea/ Rear Speaker Entrada del Mic/ Center & Bass 28
  • Biostar P4TGE | P4TGE user's manual - Page 31
    Trouble Shooting PROBABLE CAUSE SOLUTION No power to the system at all Power light don't * Make sure power cable is securely plugged in illuminate, fan inside on. Indicator light on power supply does not keyboard does not turn turn on * Replace cable * Contact technical support
  • Biostar P4TGE | P4TGE user's manual - Page 32
    Solución de Problemas CAUSA PROBABLE SOLUCIÓN No hay corriente en el sistema. La luz de * Asegúrese que el cable de transmisión esté corriente no ilumina, ventilador dentro de la seguramente enchufado. fuente de alimentación apagada. luz del teclado apagado. Indicador de * Reemplace el cable
  • Biostar P4TGE | P4TGE user's manual - Page 33
    12/13/2002 31
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33

P
P
P
4
4
4
T
T
T
G
G
G
E
E
E
i
FCC Statement and Copyright
This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. There is no guarantee that interference will not occur in a
particular installation.
The vendor makes no representations or warranties with respect to the
contents here of and specially disclaims any implied warranties of
merchantability or fitness for any purpose. Further the vendor reserves the
right to revise this publication and to make changes to the contents here of
without obligation to notify any party beforehand.
Duplication of this publication, in part or in whole is not allowed without
first obtaining the vendor’s approval in writing.
The content of this user’s is subject to be changed without notice and we
will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.