Biostar P4TPT P4TPT user's manual
Biostar P4TPT Manual
 |
View all Biostar P4TPT manuals
Add to My Manuals
Save this manual to your list of manuals |
Biostar P4TPT manual content summary:
- Biostar P4TPT | P4TPT user's manual - Page 1
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that for any mistakes found in this user's manual. All the brand and product names are trademarks of their respective companies. i - Biostar P4TPT | P4TPT user's manual - Page 2
ón de la CPU ...12 Módulos DDR DIMM: DDR1-2 13 Puentes, Cabezales, Conectores y Ranuras 14 WARPSPEEDER 19 Introduction...19 System Requirement...20 Installation...20 Usage...22 TROUBLE SHOOTING 30 SOLUCIÓN DE PROBLEMAS 31 ii - Biostar P4TPT | P4TPT user's manual - Page 3
UNIX. DIMM Power Selection by BIOS setup to adjust DDR DIMM voltage. (If you meet the DDR DIMM compatible program, try to adjust the DDR Voltage to fix the compatible program.) Intel® AC'97 2.2 compatible. High S/N ratio meets PC 99 requirements. 6CH , applicable for leading motherboard chipsets. 1 - Biostar P4TPT | P4TPT user's manual - Page 4
share with Bass and Center. Support front audio pin head functions. Package contents HDD Cable X 1, FDD Cable X 1, Fully Setup Driver CD X 1 USB Cable JUSB2 INTEL ICH4 H/W AUDIO Chip (optional) PCI3 PCI4 BAT1 PCI5 BIOS CNR1 2 JUSB3 JCMOS1 IDE1 PRIMARY IDE CONN. SECONDARY IDE CONN. IDE2 - Biostar P4TPT | P4TPT user's manual - Page 5
CPU Installation CPU 1. Pull the lever sideways away from the socket then raise the lever up to 90-degree angle. 2. Locate Pin A in the socket and lock for the white dot or cut edge in the CPU. Match Pin A with the white dot/cut edge then insert the CPU. 3. Press the lever down. Then Put the fan - Biostar P4TPT | P4TPT user's manual - Page 6
DDR200/266/333 unregistered 184-pin non-ECC DDR SDRAM DIMMs. Does not support double-size x16 DDR DIMMs. DRAM Type: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM Module (184 pin) DIMM Socket Location DDR Module Total Memory Size (MB) DDR 1 64MB/128MB/256MB/512MB/1GB *1 Max is DDR 2 64MB/128MB/256MB - Biostar P4TPT | P4TPT user's manual - Page 7
video facilities and therefore requires a video card for one of the expansion slots. Your monitor will attach directly to that video card. This motherboard supports video cards for PCI but is also equipped with an Accelerated Graphics Port (AGP). An AGP card will take advantage of AGP technology for - Biostar P4TPT | P4TPT user's manual - Page 8
Power Connectors: JATXPWR1/ JATXPWR2 JATXPWR2 (ATX 12V Power Conn.) JATXPWR1 (ATX Main Power Conn.) Wake On LAN Header: JWOL1 Ground 5V_SB Wake up WOL1 Front USB Header: JUSB2/ JUSB3 2 1 JUSB2/3 Pin1,2 ==> +5V Pin3,4 ==> Data(-) Pin5,6 ==> Data(+) Pin7,8 ==> Ground Pin9 ==> KEY Pin10 ==> NA 6 - Biostar P4TPT | P4TPT user's manual - Page 9
5V/ 5VSB Selection for USB: JUSBV1/2_3 1 Pin 1-2 on ==> 5V JUSBV1/2_3 Pin 2-3 on ==> 5V_SB 5V/ 5VSB Selection for KB: JKBV1 1 JKBV1 Pin 1-2 on ==> 5V Pin 2-3 on ==> 5V_SB Audio Subsystem: JAUDIO1/ JCDIN1 1 2 14 1 13 1 JAUDIO1 JCDIN1 (Front Audio Header) (CD-ROM Audio-In Header) 2 - Biostar P4TPT | P4TPT user's manual - Page 10
CMOS Data Front Panel Connector: JPANEL1 PWR_LED SLP (+) (+) (-) ON/OFF IR 2 24 1 23 SPK SPK (+) (-) RST IR HLED ==> Speaker Conn. HLED ==> Hard Driver LED RST ==> Reset Button IR ==> Infrared Conn. SLP ==> Sleep Button PWR_LED ==> Power LED ON/ OFF ==> Power-on Button 8 - Biostar P4TPT | P4TPT user's manual - Page 11
Back Panel Connectors JKBMS1 PS/2 Mouse JUSB1 JPRNT1 Parallel JGAME1 Game Port PS/2 Keyboard USB COM1 JCOM1 COM2 JCOM2 Speaker Line In Mic Out In 4 Ch an nel Speakers 6 Ch an n el Speakers Speaker Out Line In/ Mic In Rear Speaker Speaker Out Line In/ Mic In/ Center & Bass Rear - Biostar P4TPT | P4TPT user's manual - Page 12
Español Características del P4TPT Usa Chipset Intel 845PE/ ICH4, ITE IT8712. Contiene facilidades I/O Windows ME, Windows XP, LINUX y SCO UNIX. Corriente de Selección DIMM para configuración BIOS utilizado para ajustar voltaje DDR DIMM. (Si se encuentra con un programa compatible al DDR DIMM, - Biostar P4TPT | P4TPT user's manual - Page 13
, aplicable para chipsets de principales placas madres. Entrada de Línea phone-jack compartido con el rear out. Micrófono phone-jack compartido con Bass y Center. Soporta funciones del cabezal de audio frontal. Contenido del Paquete Cable HDD X 1, Cable FDD X 1, Configuración Completa del Driver CD - Biostar P4TPT | P4TPT user's manual - Page 14
Instalación de la CPU CPU 1. Tire de la palanca del lado del zócalo, luego levante la palanca hasta un ángulo de 90 grados. 2. Sitúe el contacto A del zócalo y busque el punto blanco o corte el borde en la CPU. Empareje el contacto A con el punto blanco/ corte del borde, luego inserte la CPU. 3. - Biostar P4TPT | P4TPT user's manual - Page 15
Módulos DDR DIMM: DDR1-2 Soporta DDR 200/266/333 unregistered 184-pin non-ECC DDR SDRAM DIMMs. No soporta DDR DIMMs x16 de doble cara. DRAM Tipo: 64MB/ 128MB/ 256MB/ 512MB/ 1GB Módulos DIMM (184 contactos) Localización Módulo DDR Total del del Zócalo DIMM Tamaño de Memoria (MB) DDR 1 64MB/ - Biostar P4TPT | P4TPT user's manual - Page 16
Puentes, Cabezales, Conectores y Ranuras Conectores del Disco Duro: IDE1/ IDE2 La placa madre tiene un controlador de 32-bit PCI IDE que proporciona Modo PIO 0~4, Bus Master, y funcionalidad Ultra DMA / 33/ 66/ 100. Tiene dos conectores HDD IDE1 (primario) y IDE2 (secundario). El conector IDE puede - Biostar P4TPT | P4TPT user's manual - Page 17
Conectores de Corriente: JATXPWR1/ JATXPWR2 JATXPWR2 (ATX 12V Conector de Corriente) JATXPWR1 (ATX Conector de Corriente Principal) Cabezal Wake On LAN: JWOL1 Tierra 5V_SB Wake up WOL1 Cabezal Frontal USB: JUSB2/ JUSB3 2 1 JUSB2/3 Contacto1,2 ==> +5V Contacto3,4 ==> Dato(-) Contacto5,6 ==> Dato - Biostar P4TPT | P4TPT user's manual - Page 18
5V/ 5VSB Selección para USB: JUSBV1/2_3 1 JUSBV1/2_3 Contacto 1-2 on ==> 5V Contacto 2-3 on ==> 5V_SB 5V/ 5VSB Selección para KB: JKBV1 1 Contacto 1-2 on ==> 5V JKBV1 Contacto 2-3 on ==> 5V_SB Subsistema de Audio: JAUDIO1/ JCDIN1 1 2 14 1 13 1 JAJAUUDDIOIO1 1 JJCCDDIINN11 (Cab( - Biostar P4TPT | P4TPT user's manual - Page 19
Conector del Panel Frontal: JPANEL1 PWR_LED SLP (+) (+) (-) ON/OFF IR 2 24 1 23 (+) (-) SPK RST IR HLED SPK HLED RST IR ==> Conector de Altavoz ==> LED del Disco Duro ==> Boton de Reinicio ==> Conector Infrarojo SLP ==> Boton de Suspension PWR_LED ==> Corriente LED ON/ OFF ==> - Biostar P4TPT | P4TPT user's manual - Page 20
Conectores del Panel Trasero JKBMS1 Raton PS/2 JUSB1 JPRNT1 Paralelo JGAME1 Puerto de Juego Teclado USB PS/2 COM1 JCOM1 COM2 JCOM2 Salida del Entrada Entrada Altavoz de Linea del MIC Altavoz de 4 Canales Altavoz de 6 Canales Salida del Altavoz Entrada de Entrada Linea/ del Mic Rear - Biostar P4TPT | P4TPT user's manual - Page 21
indicates the temperatures, voltage and CPU fan speed as well as the chipset information. Also, in the About panel, you can get detail descriptions about BIOS model and chipsets. In addition, the frequency status of CPU, memory, AGP and PCI along with the CPU speed are synchronically shown on - Biostar P4TPT | P4TPT user's manual - Page 22
System Requirement OS Support: Windows 98 SE, Windows Me, Windows 2000, Windows XP DirectX: DirectX 8.1 or above. (The Windows XP operating system includes DirectX 8.1. If you use Windows XP, - Biostar P4TPT | P4TPT user's manual - Page 23
2. When you see the following dialog in setup procedure, it means setup is completed. If the "Launch the WarpSpeeder Tray Utility" checkbox is checked, the Tray Icon utility and [ WarpSpeeder™ ] utility will be automatically and immediately launched after you click "Finish" button. 21 - Biostar P4TPT | P4TPT user's manual - Page 24
Usage The following figures are just only for reference, the screen printed in this usr manual will change according to your motherboard on hand. [ WarpSpeeder™ ] includes 1 tray icon and 5 panels: 1. Tray Icon: Whenever the Tray Icon utility is launched, it will display a little tray icon on the - Biostar P4TPT | P4TPT user's manual - Page 25
's first window you will see is Main Panel. Main Panel contains features as follows: a. Display the CPU Speed, CPU external clock, Memory clock, AGP clock, and PCI clock information. b. Contains About, Voltage, Overclock, and Hardware Monitor Buttons for invoking respective panels. c. With a user - Biostar P4TPT | P4TPT user's manual - Page 26
and the Voltage Panel will slide out to up as the following figure. In this panel, you can decide to increase CPU core voltage and Memory voltage or not. The default setting is "No". If you want to get the best performance of overclocking, we recommend you click the option "Yes - Biostar P4TPT | P4TPT user's manual - Page 27
3MHz button", "-1MHz button", "+1MHz button", and "+3MHz button": provide user the ability to do real-time overclock adjustment. Warning: Manually overclock is potentially dangerous, especially when the overclocking percentage is over 110 %. We strongly recommend you verify every speed you overclock - Biostar P4TPT | P4TPT user's manual - Page 28
d. "Verify button": User can click this button and [ WarpSpeeder™ ] will proceed a testing for current frequency. If the testing is ok, then the current frequency will be saved into system registry. If the testing fail, system will do a fail-safe rebooting. After reboot, the [ WarpSpeeder™ ] utility - Biostar P4TPT | P4TPT user's manual - Page 29
will slide out to up as the following figure. In this panel, you can get model name and detail information in hints of all the chipset that are related to overclocking. You can also get the mainboard's BIOS model and the Version number of [ WarpSpeeder™ ] utility. 27 - Biostar P4TPT | P4TPT user's manual - Page 30
28 - Biostar P4TPT | P4TPT user's manual - Page 31
Note: Because the overclock, overvoltage, and hardware monitor features are controlled by several separate chipset, [ WarpSpeeder™ ] divide these features to separate panels. If one chipset is not on board, the correlative button in Main panel will be disabled, but will not interfere other panels' - Biostar P4TPT | P4TPT user's manual - Page 32
Trouble Shooting PROBABLE SOLUTION No power to the system at all Power light don't * Make sure power cable is securely plugged in illuminate, fan inside on. Indicator light on power supply does not keyboard does not turn turn on * Replace cable * Contact technical support * Review system's - Biostar P4TPT | P4TPT user's manual - Page 33
Solución de Problemas CAUSA PROBABLE SOLUCIÓN No hay corriente en el sistema. La luz de * Asegúrese que el cable de transmisión esté corriente no ilumina, ventilador dentro de la seguramente enchufado. fuente de alimentación apagada. luz del teclado apagado. Indicador de * Reemplace el cable - Biostar P4TPT | P4TPT user's manual - Page 34
09/27/2002 32
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
 |
 |
P
P
P
4
4
4
T
T
T
P
P
P
T
T
T
i
FCC Statement and Copyright
This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. There is no guarantee that interference will not occur in a
particular installation.
The vendor makes no representations or warranties with respect to the
contents here of and specially disclaims any implied warranties of
merchantability or fitness for any purpose. Further the vendor reserves the
right to revise this publication and to make changes to the contents here of
without obligation to notify any party beforehand.
Duplication of this publication, in part or in whole is not allowed without
first obtaining the vendor’s approval in writing.
The content of this user’s is subject to be changed without notice and we
will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.