Biostar TA75M Bios Setup
Biostar TA75M Manual
 |
View all Biostar TA75M manuals
Add to My Manuals
Save this manual to your list of manuals |
Biostar TA75M manual content summary:
- Biostar TA75M | Bios Setup - Page 1
TA75M UEFI BIOS Manual UEFI BIOS Setup 1 1 Main Menu 3 2 Advanced Menu 4 3 Chipset Menu 17 4 Boot Menu 25 5 Security Menu 27 6 O.N.E Menu 28 7 Exit Menu 35 i - Biostar TA75M | Bios Setup - Page 2
are also included in UEFI BIOS. The rest of this manual will to guide you through the options and settings in UEFI BIOS Setup. Plug and Play Support This AMI UEFI BIOS supports the Plug and Play Version 1.0A specification. EPA Green PC Support This AMI UEFI BIOS supports Version 1.03 of the EPA - Biostar TA75M | Bios Setup - Page 3
TA75M UEFI BIOS Manual Supported CPUs This AMI UEFI BIOS supports the Intel CPU. Using Setup When starting up the computer, press during the Power-On Self-Test (POST) to enter the UEFI BIOS setup utility. In the UEFI BIOS setup utility, you will see General Help description at the top right - Biostar TA75M | Bios Setup - Page 4
TA75M UEFI BIOS Manual 1 Main Menu Once you enter AMI UEFI BIOS Setup Utility, the Main Menu will appear on the screen providing an overview of the basic system information. BIOS Information Shows system information including UEFI BIOS version, Project Code, Model Name, Build Date, etc. Total Memory - Biostar TA75M | Bios Setup - Page 5
TA75M UEFI BIOS Manual 2 Advanced Menu The Advanced Menu allows you to configure the settings of CPU, Super I/O, Power Management, and other system devices. Notice z Beware of that setting inappropriate values in items of this menu may cause system to malfunction. PCI Subsystem Settings 4 - Biostar TA75M | Bios Setup - Page 6
TA75M UEFI BIOS Manual PCI ROM Priority In case of multiple option ROMs (Legacy / 248 PCI Bus Clocks VGA Palette Snoop This item enables or disables VGA Palette Registers Snooping. Options: Disabled (Default) / Enabled PCI Express Settings No Snoop This item enables or disables PCI Express Device - Biostar TA75M | Bios Setup - Page 7
TA75M UEFI BIOS Manual Maximum Payload This item sets Maximum Payload of PCI Express Device or allows System BIOS to select the value. Options: allows System BIOS to select the value. Options: Auto (Default) / 128 Bytes / 256 Bytes / 512 Bytes / 1024 Bytes / 2048 Bytes / 4096 Bytes ASPM Support This - Biostar TA75M | Bios Setup - Page 8
TA75M UEFI BIOS Manual S3 Video Repost This item allows you to enable or disable S3 Video Repost. Options: Disabled (Default) / Enabled EuP Control When EuP is enabled, the system will meet EuP requirement. Options: Disabled (Default) / Enabled PME Wake up from S5 The item enables the system to wake - Biostar TA75M | Bios Setup - Page 9
TA75M UEFI BIOS Manual Stroke Keys Selected This item will show only when Keyboard PowerOn is set " the mouse power on function. Options: Disabled (Default) / Enabled USB Device Wakeup from S3/S4 This item allows you to enable or disabled the USB resume from S3/S4 function. Options: Disabled (Default - Biostar TA75M | Bios Setup - Page 10
TA75M UEFI BIOS Manual Limit CPUID Maximum When the computer is booted up, the operating system executes the CPUID instruction to identify the processor and its capabilities. Before it can do so, it must first query the processor to find out the highest input value - Biostar TA75M | Bios Setup - Page 11
TA75M UEFI BIOS Manual Node 0 Information This item shows Node 0 Information SATA Configuration The BIOS will automatically detect the presence of SATA devices. There is a sub-menu for each SATA device. Select a device and press to enter the sub-menu for detailed options. . 10 - Biostar TA75M | Bios Setup - Page 12
TA75M UEFI BIOS Manual SMART FAN Control CPU Smart FAN This item allows you to control CPU FAN. Control Mode This item provides several operation modes of the fan. Options: Quiet / Aggressive / Manual Fan Ctrl OFF(℃) When CPU temperature is lower than this value, the CPU fan will keep lowest RPM. - Biostar TA75M | Bios Setup - Page 13
TA75M UEFI BIOS Manual Fan Ctrl Start Value This item sets CPU FAN Start Speed Value. Options: 50 (Default) Fan Ctrl Sensitive The bigger the numeral is, the higher the FAN speed is. Options: 30 (Default) USB Configuration Legacy USB Support This item determines if the BIOS should provide legacy - Biostar TA75M | Bios Setup - Page 14
TA75M UEFI BIOS Manual EHCI Hand-Off This is a workaround for OSes without EHCI hand-off support. The EHCI ownership change should be claimed by EHCI driver. Options: Disabled (Default) / Enabled USB FLASH DRIVE PMAP This items shows when user inserts USB drive. Super IO Configuration Restore AC - Biostar TA75M | Bios Setup - Page 15
TA75M UEFI BIOS Manual Serial Port 1 Configuration Serial Port This item enables or disables Serial Port (COM). Options: Enabled (Default) / Disabled Change Settings This item selects an optimal setting for Super IO device. Options: Auto (Default) Parallel Port Configuration Parallel Port This item - Biostar TA75M | Bios Setup - Page 16
TA75M UEFI BIOS Manual Change Settings This item allows you to select an optimal setting for Super EPP mode) CIR Controller Configuration CIR Controller This item enables or disables CIR Controller. Options: Disabled (Default) / Enabled Change Settings This item selects an optimal setting for Super - Biostar TA75M | Bios Setup - Page 17
TA75M UEFI BIOS Manual H/W Monitor Shutdown Temperature This item allows you to set up the CPU shutdown Temperature. Options: Disabled (Default) / 70℃/158℉ / 75℃/167℉ / 80℃/176℉ / 85℃/185℉ / 90℃/194℉ 16 - Biostar TA75M | Bios Setup - Page 18
TA75M UEFI BIOS Manual 3 Chipset Menu This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a system which allows I/O devices to operate at speeds nearing - Biostar TA75M | Bios Setup - Page 19
TA75M UEFI BIOS Manual Launch PXE OpROM This item enables/disables Boot Option for Legacy Network Devices. Options: Disabled (Default) / Enabled Launch Storage OpROM This item enables/disables Boot Option for Legacy Mass Storage Devices with Option ROM. Options: Enabled (Default) / Disabled Realtek - Biostar TA75M | Bios Setup - Page 20
TA75M UEFI BIOS Manual GFX Configuation PSPP Policy This item allows you to set PCIe speed power policy. Options: Balanced-High (Default) / Disabled / Performance / Balanced-Low / Power Saving GFX HD Audio controller This item allows you to enable or disable GFX HD Audio controller. Options: Enabled - Biostar TA75M | Bios Setup - Page 21
TA75M UEFI BIOS Manual Bank Interleaving Bank Interleaving is an advanced chipset technique used to improve memory performance. Memory interleaving increases bandwidth by allowing simultaneous access to more than one piece of memory. Options: Enabled (Default) / Disabled Channel Interleaving This - Biostar TA75M | Bios Setup - Page 22
TA75M UEFI BIOS Manual SB SAT A Configuration S OnChip SATA Channel This option allows you to enable the on-chip Serial ATA. Options: Enabled (Default) / Disabled OnChip SATA Type This option allows you to select the on-chip Serial ATA operation mode. Options: Native IDE (Default) / RAID / AHCI / - Biostar TA75M | Bios Setup - Page 23
TA75M UEFI BIOS Manual SB USB Configuration XHCI Switch This item allows you to switch XHCI Options: Enabled (Default) / Disabled OHCI HC (Bus 0 Dev 18/19/20 Fn 0/5) This item allows you to control OHCI host controller. (USB 1.1 Device) Options: Enabled (Default) / Disabled EHCI HC (Bus 0 Dev 18/19 - Biostar TA75M | Bios Setup - Page 24
TA75M UEFI BIOS Manual SB GPP Port Configuration GPP Link ASPM Options: Disabled (Default) / L1 GPP Gen2/ UMI Gen2 Options: Enabled (Default) / Disabled GPP HW Compliance Mode Options: Disabled (Default) / Port A / Port B / Port C / Port D SB GPP LANE REVERSAL Options: Disabled (Default) / Enabled - Biostar TA75M | Bios Setup - Page 25
TA75M UEFI BIOS Manual SB Azalia Audio Configuration HD Audi o Azalia Device This item allows you to control the HD audio device. Options: Enabled (Default) / Auto / Disabled 24 - Biostar TA75M | Bios Setup - Page 26
TA75M UEFI BIOS Manual 4 Boot Menu This menu allows you to setup the system boot options. Setup Prompt Timeout This item sets number of seconds to wait for setup activation key. Options: 2 (Default) Bootup NumLock State This item selects the keyboard NumLock state. Options: On (Default) / Off Full - Biostar TA75M | Bios Setup - Page 27
TA75M UEFI BIOS Manual GateA20 Active Upon Request - FA20 can be disabled using BIOS services. Always - do not allow disabling GA20; this disk function. When set to Enabled, this item allows the option ROMs to trap interrupt 19. Options: Disabled (Default) / Enabled Boot Option #1/#2/#3 The items - Biostar TA75M | Bios Setup - Page 28
TA75M UEFI BIOS Manual 5 Security Menu Administrator Password This item sets Administrator Password. User Password This item sets User Password. 27 - Biostar TA75M | Bios Setup - Page 29
TA75M UEFI BIOS Manual 6 O.N.E Menu This submenu allows you to Biostar Engineer Team, OverClock Navigator provides 3 default overclock configurations that are able to raise the system performance. Options: Normal (Default) / Automate OverClock / Manual OverClock Auto OverClock System The Overclock - Biostar TA75M | Bios Setup - Page 30
TA75M UEFI BIOS Manual V6 Tech Engine This engine will make a good over-clock performance. V8 Tech Engine This engine will make a better over-clock performance. V12 Tech Engine This engine will make a best over-clock performance. CPU Clock This item allows BIOS to select CPU Clock (MHz). Options: - Biostar TA75M | Bios Setup - Page 31
TA75M UEFI BIOS Manual DDR Memory Over Voltage This item allows you to the DRAM speed will not exceed the specified value. If Manual, the DRAM speed specified will be programmed regardless of SPD. Options: Auto (Default) / Limit / Manual Memclock Value This item allows you to set the Memory Clock - Biostar TA75M | Bios Setup - Page 32
TA75M UEFI BIOS Manual DRAM Timing Mode This item allows you to choose to manually or automatically regulate the DRAM Timing. Options: Auto (Default) / DCT0 / DCT1 / Both CL Options: Auto (Default) / 4~12 CLK 2TCMD Options: Auto (Default) / 1T / 2T TRCD - Biostar TA75M | Bios Setup - Page 33
TA75M UEFI BIOS Manual TRWTTO Options: Auto (Default) / 4~7 CLK TWRRD Options: Auto (Default) / 4~7 CLK TWT R Options: Auto (Default) / 4~7 CLK TWRWR Options: Auto (Default) / 4~7 CLK TRDRD Options: Auto (Default) / 4~7 CLK - Biostar TA75M | Bios Setup - Page 34
TA75M UEFI BIOS Manual Bank Interleaving Bank Interleaving is an advanced chipset technique 64-bit OS supports this function. Options: Enabled (Default) / Disable Link Unganged Mode support This item controls the DRAM controller ganged (128bit*1) / unganged (64bit*2) dual-channel operation mode. - Biostar TA75M | Bios Setup - Page 35
TA75M UEFI BIOS Manual G.P.U Phase Control G.P.U Phase Mode This item allows you to control G.P.U Phase Mode (power saving technology). Options: Auto (Default) / Off 34 - Biostar TA75M | Bios Setup - Page 36
UEFI BIOS Manual 7 Exit Menu This menu allows you to load the optimal default settings, and save or discard the changes to the BIOS items. Save Changes and Reset Reset the system after saving the changes. Discard Changes and Exit Abandon all changes made during the current session and exit setup
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
 |
 |
TA75M UEFI BIOS Manual
i
UEFI BIOS Setup
......................................................................................
1
1 Main Menu
.............................................................................................
3
2 Advanced Menu
......................................................................................
4
3 Chipset Menu
.......................................................................................
17
4 Boot Menu
.............................................................................................
25
5 Security Menu
......................................................................................
27
6 O.N.E Menu
..........................................................................................
28
7 Exit Menu
.............................................................................................
35