Biostar TA790GX XE Update Manual
Biostar TA790GX XE Manual
 |
View all Biostar TA790GX XE manuals
Add to My Manuals
Save this manual to your list of manuals |
Biostar TA790GX XE manual content summary:
- Biostar TA790GX XE | Update Manual - Page 1
are three ways to update the BIOS: BIOS Update Utility, BIOS Online Update Utility and BIOS Flasher. BIOS update utility 1. Installing BIOS Update Utility from the DVD Driver. 2. Download the proper BIOS from www.biostar.com. tw . 3. Open BIOS Update Utility and click the Update BIOS button on the - Biostar TA790GX XE | Update Manual - Page 2
BIOS Update Utility from the DVD Driver. 2. Please make sure the system is connected to the internet before using this function. 3. Open BIOS Update Utility and click the Online Update button on the main screen. 4. An open dialog will show up to request your agreement to start the BIOS update - Biostar TA790GX XE | Update Manual - Page 3
POST) procedure while booting up. Updating BIOS with BIOSTAR BIOS Flasher 1. Go to the website to download the latest BIOS file for the motherboard. 2. Then, copy and save the BIOS file into a USB flash (pen) drive. 3. Insert the USB pen drive that contains the BIOS file to the USB port. 4. Power on
-
1 -
2 -
3
 |
 |
How to update BIOS?
There are three ways to update the BIOS:
BIOS Update Utility, BIOS Online Update Utility and BIOS Flasher.
BIOS update utility
1. Installing BIOS Update Utility from the DVD Driver.
2. Download the proper BIOS from www.biostar.com.
tw .
3. Open BIOS Update Utility and click the Update
BIOS button on the main screen.
4. A warning message will show up to request your
agreement to start the BIOS update. Click Yes to start
the update procedure.
5. Choose the location for your BIOS file in the system.
Please select the proper BIOS file, and then click on
Open. It will take several minutes, please be patient.
6. After the BIOS Update process is finished, click on
OK to reboot the system.
7. While the system boots up and the full screen logo shows up, please press the
<Delete> key to enter BIOS setup.
After entering the BIOS setup, please go to the Save & Exit, using the Restore
Defaults function to load Optimized Defaults, and select Save Changes and Reset to
restart the computer. Then, the BIOS Update is completed.
Backup BIOS
Click the Backup BIOS button on the main screen for
the backup of BIOS, and select a proper location for
your backup BIOS file in the system, and click Save.