Biostar TFORCE TF7050-M2 MANUAL
Biostar TFORCE TF7050-M2 Manual
 |
View all Biostar TFORCE TF7050-M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Biostar TFORCE TF7050-M2 manual content summary:
- Biostar TFORCE TF7050-M2 | MANUAL - Page 1
TF7050-M2/TF7025-M2 Setup Manual FCC Information and Copyright This equipment has been tested and found radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference - Biostar TFORCE TF7050-M2 | MANUAL - Page 2
(for TF7050-M2 6 1.5 Rear Panel Connectors (for TF7025-M2 7 1.6 Motherboard Layout (for TF7050-M2 8 1.7 Motherboard Layout (for TF7025-M2 9 Chapter 2: Hardware Installation 10 2.1 Installing Central Processing Unit (CPU 10 2.2 FAN Headers 12 2.3 Installing System Memory 13 - Biostar TFORCE TF7050-M2 | MANUAL - Page 3
TF7050-M2/TF7025-M2 CHAPTER 1: INTRODUCTION 1.1 BEFORE YOU START Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions ATA Cable X 1 Rear I/O Panel for ATX Case X 1 User's Manual X 1 Fully Setup Driver CD X 1 FDD Cable X 1 ( - Biostar TFORCE TF7050-M2 | MANUAL - Page 4
Motherboard Manual 1.3 MOTHERBOARD FEATURES TF7050-M2 TF7025-M2 Socket AM2 Socket AM2 AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2 / AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2 / Sempron processors Sempron processors CPU AMD 64 Architecture enables 32 and 64 bit AMD 64 Architecture enables - Biostar TFORCE TF7050-M2 | MANUAL - Page 5
Size 235 mm(W) x 244 mm(L) Special Features RAID 0 / 1 / 5 / 0+1 support Windows 2000 / XP / VISTA OS Support Biostar Reserves the right to add or remove support for any OS With or without notice. TF7050-M2/TF7025-M2 TF7025-M2 ALC888 (Ver 5.x) / ALC861VD (Ver 6.x) 7.1 channels audio out (Ver - Biostar TFORCE TF7050-M2 | MANUAL - Page 6
Motherboard Manual 1.4 REAR PANEL CONNECTORS (FOR TF7050-M2) X PS/2 Mouse Port Y PS/2 Keyboard Port Z S-Video TV-Out Port Transmit analog video signals to TV or any other display panels equipped with S-Video input. [ HDMI Port The High-Definition Multimedia Interface (HDMI RJ-45 LAN Port _ - Biostar TFORCE TF7050-M2 | MANUAL - Page 7
TF7050-M2/TF7025-M2 1.5 REAR PANEL CONNECTORS (FOR TF7025-M2) X PS/2 Mouse Port Y PS/2 Keyboard Port Z DVI-D monitor or any other display panels equipped with D-Sub VGA input. \ USB 2.0 Port x 4 ] RJ-45 LAN Port ^ Audio Jack x 6 (for Ver 5.x) / Audio Jack x 3 (for Ver 6.x) Port Blue Green - Biostar TFORCE TF7050-M2 | MANUAL - Page 8
Motherboard Manual 1.6 MOTHERBOARD LAYOUT (FOR TF7050-M2) JKBMS1 JATXPWR2 JTVOUT1 JHDMI DIMMA1 DIMMB1 DIMMA2 DIMMB2 Socket A M2 VGA JUSB1 JUSBV1 LAN PCI1 JCOM1 Super I/O Codec JCDIN1 PCI2 JSPDIF_IN1 JSPDIF_OUT1 JPRNT1 FDD1 Note: ■ represents the 1st pin. JUSB2 JUSB3 JUSB4 BIOS BAT1 - Biostar TFORCE TF7050-M2 | MANUAL - Page 9
TF7050-M2/TF7025-M2 1.7 MOTHERBOARD LAYOUT (FOR TF7025-M2) JKBMS1 JATXPWR2 VGA DIMMA1 DIMMB1 DIMMA2 DIMMB2 Socket A M2 DVI-D JUSB1 JUSBV1 JATXPWR1 LAN PCI1 JCOM1 Super I/O Codec JCDIN1 PCI2 JSPDIF_IN1 JSPDIF_OUT1 JPRNT1 FDD1 Note: ■ represents the 1st pin. JUSB2 JUSB3 JUSB4 BIOS - Biostar TFORCE TF7050-M2 | MANUAL - Page 10
Motherboard Manual CHAPTER 2: HARDWARE INSTALLATION 2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU) Step 1: Remove the socket protection cap. Step 2: Pull the lever toward direction A from the socket and then raise the lever up to a 90-degree angle. - Biostar TFORCE TF7050-M2 | MANUAL - Page 11
TF7050-M2/TF7025-M2 Step 4: Hold the CPU down firmly, and then close the lever toward direct B to complete the installation. Step 5: Put the CPU Fan on the CPU and buckle it. Connect the CPU FAN power cable to the JCFAN1. This completes the installation. 11 - Biostar TFORCE TF7050-M2 | MANUAL - Page 12
Motherboard Manual 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1. JCFAN1: CPU Fan Header 4 Pin Assignment 1 - Biostar TFORCE TF7050-M2 | MANUAL - Page 13
2.3 INSTALLING SYSTEM MEMORY A. Memory Modules TF7050-M2/TF7025-M2 DIMMA1 DIMMB1 DIMMA2 DIMMB 2 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM - Biostar TFORCE TF7050-M2 | MANUAL - Page 14
Motherboard Manual B. Memory Capacity DIMM Socket Location DDR2 Module DIMMA1 256MB/512MB/1024MB DIMMB1 256MB/512MB/1024MB DIMMA2 256MB/512MB/1024MB DIMMB2 256MB/512MB/1024MB Total Memory Size Max is 4GB. C. Dual Channel Memory installation To trigger the Dual Channel function of the - Biostar TFORCE TF7050-M2 | MANUAL - Page 15
TF7050-M2/TF7025-M2 2.4 CONNECTORS AND SLOTS FDD1: Floppy Disk Connector The motherboard provides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the provided floppy drive ribbon cables. 2 34 1 33 IDE1: Hard Disk - Biostar TFORCE TF7050-M2 | MANUAL - Page 16
Motherboard Manual PEX16_1: PCI-Express x16 Slot - PCI-Express 1.0a compliant. - Maximum theoretical compliant. - Data transfer bandwidth up to 250MB/s per direction; 500MB/s in total. - PCI-Express supports a raw bit-rate of 2.5GB/s on the data pins. - 2X bandwidth over the traditional PCI - Biostar TFORCE TF7050-M2 | MANUAL - Page 17
TF7050-M2/TF7025-M2 CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW TO SETUP JUMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the - Biostar TFORCE TF7050-M2 | MANUAL - Page 18
Motherboard Manual JATXPWR1: ATX Power Source Connector This connector allows user to connect 24-pin power connector on the ATX 10 +12V 11 +12V 12 +3.3V JATXPWR2: ATX Power Source Connector By connecting this connector, it will provide +12V to CPU power circuit. 21 Pin Assignment 34 1 + - Biostar TFORCE TF7050-M2 | MANUAL - Page 19
TF7050-M2/TF7025-M2 JUSB2/JUSB3/JUSB4: Headers for USB 2.0 Ports at Front Panel . JUSBV1 3 1 3 1 3 1 Pin 1-2 close 13 JUSBV2 3 1 3 1 Pin 2-3 close Note: In order to support this function "Power-On system via USB device," "JUSBV1/ JUSBV2" jumper cap should be placed on Pin 2-3 individually. 19 - Biostar TFORCE TF7050-M2 | MANUAL - Page 20
Motherboard Manual SATA1~SATA4: Serial ATA Connectors The motherboard has a PCI to SATA Controller with 4 channels SATA interface. Pin Assignment 1 Ground 2 TX+ 3 TX- 4 Ground SATA1 SATA3 5 RX- SATA2 SATA4 6 7 RX+ Ground 741 JAUDIOF1: Front - Biostar TFORCE TF7050-M2 | MANUAL - Page 21
TF7050-M2/TF7025-M2 JCMOS1: Clear CMOS Header By placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data, please carefully follow the procedures to avoid damaging the motherboard. 3 1 Pin 1-2 Close: Normal Operation (default). 3 3 1 1 ※ Clear CMOS - Biostar TFORCE TF7050-M2 | MANUAL - Page 22
Motherboard Manual JSPDIF_OUT1: Digital Audio-out Connector This connector allows user to connect the PCI bracket SPDIF output header. 3 1 Pin Assignment 1 +5V 2 SPDIF_OUT 3 Ground JCOM1: Serial port Connector The motherboard has a Serial Port Connector for connecting RS-232 Port. 2 10 1 9 - Biostar TFORCE TF7050-M2 | MANUAL - Page 23
On-Board Buttons There are 2 on-board buttons. TF7050-M2/TF7025-M2 PWRSW1 RSTSW1 PWRSW1: This is an on-board Power Switch button. RSTSW1: This is an on-board Reset button. On-Board LED Indicators There are 2 LED indicators on the motherboard to show system status. LED_D1 LED_D2 LED_D1 and - Biostar TFORCE TF7050-M2 | MANUAL - Page 24
Motherboard Manual JPRNT1: Printer Port Connector This header allows you to connector printer on the PC. 2 1 25 Pin Assignment 1 -Strobe 2 -ALF 3 Data 0 4 -Error 5 Data 1 6 -Init 7 Data 2 8 -Scltin 9 - Biostar TFORCE TF7050-M2 | MANUAL - Page 25
TF7050-M2/TF7025-M2 CHAPTER 4: RAID FUNCTIONS 4.1 OPERATION SYSTEM z Supports Windows XP Home/Professional Edition, and Windows 2000 Professional. 4.2 RAID ARRAYS RAID supports the following types of RAID arrays: RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times - Biostar TFORCE TF7050-M2 | MANUAL - Page 26
Motherboard Manual RAID 1: Every read and write is actually carried out in parallel across can be applied for high-availability solutions, or as a form of automatic backup that eliminates tedious manual backups to more expensive and less reliable media. Features and Benefits Drives: Minimum 2, and - Biostar TFORCE TF7050-M2 | MANUAL - Page 27
TF7050-M2/TF7025-M2 RAID 0+1: RAID 0 drives can be mirrored using RAID 1 techniques. Resulting in a RAID 0+1 solution for improved performance plus resiliency. Features and Benefits Drives: Minimum 4, and maximum - Biostar TFORCE TF7050-M2 | MANUAL - Page 28
Motherboard Manual for transaction processing and general purpose service. Benefits: An ideal combination same as a single disk. Write performance can be CPU intensive. Fault Tolerance: Yes. Disk 1 DATA setup information, please refer to the Driver CD, or go to http://www.nvidia.com/page/pg_20011106217193 - Biostar TFORCE TF7050-M2 | MANUAL - Page 29
TF7050-M2/TF7025-M2 CHAPTER 5: OVERCLOCK QUICK GUIDE 5.1 T-POWER INTRODUCTION Biostar T-Power is a whole new utility that is designed for overclock users. Based on many precise tests, Biostar Engineering Team (BET) has developed this ultimate overclock engine to raise system performance. No matter - Biostar TFORCE TF7050-M2 | MANUAL - Page 30
Motherboard Manual 5.2 T-POWER BIOS FEATURE A. Overclocking Navigator Engine (O.N.E.): ONE provides two powerful overclocking engines: MOS and AOS for both Elite and Casual overclockers. Manual Overclock System (M.O.S.) MOS is designed for experienced overclock users. It allows users to customize - Biostar TFORCE TF7050-M2 | MANUAL - Page 31
TF7050-M2/TF7025-M2 CPU Overclock Setting: CPU Voltage: This function will increase CPU stability when overclocking. However, the CPU temperature will increase when CPU voltage is increased. CPU Frequency: CPU sometimes downgrading the memory frequency is necessary when CPU frequency is adjusted - Biostar TFORCE TF7050-M2 | MANUAL - Page 32
Motherboard Manual Automatic Overclock System (A.O.S.) For beginners in overclock field, BET had developed an easy, fast, and powerful feature to increase the system performance, named A.O.S. Based on - Biostar TFORCE TF7050-M2 | MANUAL - Page 33
TF7050-M2/TF7025-M2 V12 Tech Engine: This setting will raise about 25%~30% of whole system performance. Notices: 1. Not all types of AMD CPU perform above overclock setting ideally; the difference will be based on the selected CPU model. 2. From BET experiments, the Atholon64 FX CPU is not - Biostar TFORCE TF7050-M2 | MANUAL - Page 34
Motherboard Manual C. Memory Integration Test (M.I.T.): This function is under "Overclocking Navigator Engine" item. MIT allows users to test memory compatibilities, and no extra devices or software are needed. Step 1: The default setting under this item is "Disabled"; the condition parameter should - Biostar TFORCE TF7050-M2 | MANUAL - Page 35
TF7050-M2/TF7025-M2 D. Self Recovery System (S.R.S.): This function can't be seen under T-Power BIOS setup; and is always the BIOS file downloaded in step 1. Step 4: Press "Enter" key to start BIOS file loading, and BIOS updating will process automatically. Step 5: When the BIOS update is completed - Biostar TFORCE TF7050-M2 | MANUAL - Page 36
Motherboard Manual F. Smart Fan Function: Smart Fan Function is under "PC Health Status". This is a brilliant feature to control CPU Temperature vs. Fan speed. When enabling Smart Fan function, Fan speed is controlled automatically by CPU temperature. This function will protect CPU from overheat - Biostar TFORCE TF7050-M2 | MANUAL - Page 37
TF7050-M2/TF7025-M2 Start PWM Value When CPU temperature arrives to the set value, the CPU fan will work under Smart Fan Function mode. The range is from 0~127, with an interval of 1. Slope PWM Choices: 1 PWM Value/℃ (default), 2 PWM Value/℃, 4 - Biostar TFORCE TF7050-M2 | MANUAL - Page 38
Motherboard Manual 5.3 T-POWER WINDOWS FEATURE A.Hardware Monitor: T-Power Hardware monitor allows users to Monitor Toolbar i. Start-up Setting Click on this item to run Hardware Monitor Program when the Windows starts-up. ii. Dialogue-Box Setting Click on this item to pop-up warning dialogue-box - Biostar TFORCE TF7050-M2 | MANUAL - Page 39
TF7050-M2/TF7025-M2 CPU Temperature This column configures the CPU temperature. There is a waveform to represent the status of CPU temperature. By adjusting , users can easily configure the upper limit of CPU this diagram, the green line shows present CPU Fan speed, and the yellow line shows System - Biostar TFORCE TF7050-M2 | MANUAL - Page 40
Motherboard Manual CPU/Battery Voltage i. VCore This item displays the CPU voltage, represented by a light blue line. Users can set the upper and lower limit by adjusting to monitor the CPU operating voltage. If CPU voltage is higher or lower than the set value, the status line will change into a - Biostar TFORCE TF7050-M2 | MANUAL - Page 41
TF7050-M2/TF7025-M2 This diagram is designed for T-series Overclocking utility. Friendly interface and solid overclock features are the major concept of this utility. Graphic 1 will appear when activating this utility. Graphic 2 Graphic 1 A. Clicking on "Biostar" will lead you to the Biostar - Biostar TFORCE TF7050-M2 | MANUAL - Page 42
Motherboard Manual CPU Overclocking Settings: By adjusting can configure three items for CPU overclocking. A. CPU Frequency Range: 200MHz~450MHz. Interval: 1MHz. B. CPU Ratio Range: 4~25. Interval: 1. C. CPU Voltage Range: 0.8V~2.0V. Interval: 0.0125V. Memory Overclocking Settings: By adjusting can - Biostar TFORCE TF7050-M2 | MANUAL - Page 43
PCI Overclocking Setting: TF7050-M2/TF7025-M2 This diagram shows present PCI working status and helps to monitor PCI peripherals working status. This item cannot be adjusted. 43 - Biostar TFORCE TF7050-M2 | MANUAL - Page 44
Motherboard Manual C. Smart Fan Function When Smart Fan Function is activated, screens will pop-up to illustrate the fan speed information. i. CPU Temperature: Show current CPU temperature. ii. CPU Fan speed: Show current CPU Fan speed. iii. System Fan speed: Show current system Fan speed. iv. - Biostar TFORCE TF7050-M2 | MANUAL - Page 45
TF7050-M2/TF7025-M2 v. Auto: If the green indicator is lit up, the Smart Fan Function is "On" (Default Setting). Click on this button again to close Smart Fan Function, and a screen as below would pop-up. There will be pulling-meter besides the CPU Fan and System Fan, the CPU Fan and the System Fan - Biostar TFORCE TF7050-M2 | MANUAL - Page 46
Motherboard Manual D. Live Update When Live Update program is activated, a screen will pop up to illustrate BIOS related information. i. Link to Internet: Click on this button will link to Biostar website and BIOS file will be downloaded. ii. Update BIOS: Click on this button to run BIOS flashing - Biostar TFORCE TF7050-M2 | MANUAL - Page 47
HELP TF7050-M2/TF7025-M2 6.1 DRIVER INSTALLATION NOTE After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance. You will see the following window after you insert the CD The setup guide will - Biostar TFORCE TF7050-M2 | MANUAL - Page 48
Motherboard Manual 6.2 AWARD BIOS BEEP CODE Beep Sound Meaning One long beep followed by two short Video card not found or video card beeps memory bad High-low siren sound CPU overheated System will shut down automatically One Short beep when system boot-up No error found during POST Long - Biostar TFORCE TF7050-M2 | MANUAL - Page 49
TF7050-M2/TF7025-M2 B. CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power - Biostar TFORCE TF7050-M2 | MANUAL - Page 50
Motherboard Manual 6.4 TROUBLESHOOTING Probable Solution 1. No power to the system at all 1. Make sure power cable is Power light don't illuminate, fan securely plugged in. inside power supply does not turn 2. Replace cable. on. 3. Contact technical support Failure." Review system's - Biostar TFORCE TF7050-M2 | MANUAL - Page 51
TF7050-M2/TF7025-M2 This page is intentionally left blank. 51 - Biostar TFORCE TF7050-M2 | MANUAL - Page 52
Motherboard Manual APPENDENCIES: SPEC IN OTHER LANGUAGE GERMAN TF7050-M2 TF7025-M2 Sockel AM2 Sockel AM2 AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2 / AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2/ Sempron Prozessoren Sempron Prozessoren CPU Mb/s Auto-Negotiation LAN (Gigabit-Bandbreite nur - Biostar TFORCE TF7050-M2 | MANUAL - Page 53
Unterstützt RAID 0 / 1 / 5 / 0+1 onen Windows 2000 / XP / VISTA Biostar behält sich das Recht vor, ohne OS-Unterstüt Ankündigung die Unterstützung für ein zung Betriebssystem hinzuzufügen oder zu entfernen. TF7050-M2/TF7025-M2 TF7025-M2 ALC888 (Ver 5.x) / ALC861VD (Ver 6.x) 7.1-Kanal - Biostar TFORCE TF7050-M2 | MANUAL - Page 54
Motherboard Manual FRANCE TF7050-M2 TF7025-M2 Socket AM2 Socket AM2 Processeurs AMD Athlon 64 / Athlon 64 FX / / 100 / 1000 Mb/s négociation automatique 10 / 100 / 1000 Mb/s négociation automatique LAN (La bande passante Gigabit est pour le RTL (La bande passante Gigabit est pour le RTL - Biostar TFORCE TF7050-M2 | MANUAL - Page 55
en charge RAID 0 / 1 / 5 / 0+1 Prise en charge RAID 0 / 1 / 5 / 0+1 spéciales Windows 2000 / XP / VISTA Windows 2000 / XP / VISTA Support SE Biostar se réserve le droit d'ajouter ou de Biostar se réserve le droit d'ajouter ou de supprimer le support de SE avec ou sans préavis. supprimer le - Biostar TFORCE TF7050-M2 | MANUAL - Page 56
Motherboard Manual ITALIAN TF7050-M2 TF7025-M2 CPU Socket AM2 Socket AM2 Processori AMD Athlon 64 / Athlon 64 PHY (optional) Negoziazione automatica 10 / 100 / 1000 Negoziazione automatica 10 / 100 / 1000 LAN Mb/s (la larghezza di banda Gigabit è solo Mb/s (la larghezza di banda Gigabit è - Biostar TFORCE TF7050-M2 | MANUAL - Page 57
TF7050-M2/TF7025-M2 TF7050-M2 TF7025-M2 Codec audio ALC888 (Ver 5.x) / ALC861VD (Ver 6.x) Uscita audio 7.1 canali (Ver 5.x) / Uscita audio 5.1 canali (Ver 6.x) Supporto audio High-Definition (HD) Uscita audio 2 canali (HDMI -D x1 Porta LAN x1 Porta USB Windows 2000 / XP / VISTA Sistemi Biostar - Biostar TFORCE TF7050-M2 | MANUAL - Page 58
Motherboard Manual SPANISH TF7050-M2 TF7025-M2 Conector AM2 Conector AM2 Procesadores AMD Athlon 64 / Athlon 64 FX / Procesadores AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2 / Sempron Athlon 64 x2/ Sempron CPU La arquitectura AMD 64 permite el procesado de La arquitectura AMD 64 permite el - Biostar TFORCE TF7050-M2 | MANUAL - Page 59
mm. (A) X 244 Mm. (H) Funciones Admite RAID 0 / 1 / 5 / 0+1 especiales Admite RAID 0 / 1 / 5 / 0+1 Soporte de Windows 2000 / XP / VISTA Windows 2000 / XP / VISTA sistema Biostar se reserva el derecho de añadir o retirar Biostar se reserva el derecho de añadir o retirar operativo el soporte de - Biostar TFORCE TF7050-M2 | MANUAL - Page 60
Motherboard Manual PORTUGUESE TF7050-M2 TF7025-M2 Socket AM2 Socket AM2 Processadores AMD Athlon 64 / Athlon 64 FX / Processadores AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2 / Sempron Athlon 64 x2/ Sempron CPU de 10 / 100 / 1000 Mb/s (a LAN largura de banda Gigabit refere-se apenas à - Biostar TFORCE TF7050-M2 | MANUAL - Page 61
ventoinha da CPU x1 Conector Porta HDMI x1 aídas no Porta VGA x1 painel Porta LAN x1 Windows 2000 / XP / VISTA Sistemas A Biostar reserva-se o direito de adicionar ou operativos remover suporte para qualquer sistema suportados operativo com ou sem aviso prévio. TF7050-M2/TF7025-M2 TF7025-M2 - Biostar TFORCE TF7050-M2 | MANUAL - Page 62
Motherboard Manual POLISH TF7050-M2 TF7025-M2 Procesor Socket AM2 AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2 / Sempron Procesory Architektura AMD 64 umożliwia przetwarzanie 32 i 64 bitowe Obsługa Hyper Transport oraz Cool'n'Quiet Socket AM2 wyłącznie dla RTL LAN 8111B PHY) 8111B PHY - Biostar TFORCE TF7050-M2 | MANUAL - Page 63
TF7050-M2/TF7025-M2 TF7050-M2 TF7025-M2 ALC888 (Ver 5.x) / ALC861VD (Ver 6.x) 7.1 kanałowe wyjście audio (Ver 5.x) / Kodek 5.1 kanałowe wyjście audio (Ver 6.x) dźwiękowy Obsługa High-Definition Audio 2 kanałowe wyjście audio (HDMI Obsluga Windows 2000 / XP / VISTA systemu Biostar zastrzega - Biostar TFORCE TF7050-M2 | MANUAL - Page 64
Motherboard Manual RUSSIAN TF7050-M2 TF7025-M2 AM2 AM2 CPU AMD Athlon 64 / Athlon 64 FX AMD Athlon 64 / Athlon 64 FX / Althlon 64X2 / Sempron ый AMD 64 32 и 64 бит Hyper Transport и Cool'n'Quiet - Biostar TFORCE TF7050-M2 | MANUAL - Page 65
TF7050-M2/TF7025-M2 TF7050-M2 TF7025-M2 ALC888 (Ver 5.x) / ALC861VD (Ver 6.x) 7.1 Ver 5.x) / 5.1 Ver 6.x High-Definition 2 HDMI HDMI x1 Порт DVI-D x1 VGA x1 Порт LAN x1 LAN 0+1 тики Windows 2000 / XP / VISTA Windows 2000 / XP / VISTA Biostar Biostar OS OS - Biostar TFORCE TF7050-M2 | MANUAL - Page 66
Motherboard Manual ARABIC TF7025-M2 TF7050-M2 AM2 AM2 AMD Athlon 64 / Athlon 64 FX Athlon 64 x2 / Sempron 32و 64ﺏﺖAMD 64 AMD Athlon 64 / Athlon 64 FX Athlon 64 x2 / Sempron 32و - Biostar TFORCE TF7050-M2 | MANUAL - Page 67
TF7050-M2/TF7025-M2 TF7025-M2 TF7050-M2 HDMI 1 VGA 1 4 USB 6 Ver 5.x 3 Ver 6.x RAID 0 / 1 / 5 / 0+1 235 244 X Windows 2000 / XP / VISTA Biostar RAID 0 / 1 / 5 / 0+1 235 244 X Windows 2000 / XP / VISTA Biostar - Biostar TFORCE TF7050-M2 | MANUAL - Page 68
Motherboard Manual JAPANESE TF7050-M2 TF7025-M2 Socket AM2 Socket AM2 AMD Athlon 64 / Athlon 64 FX / AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2/ Sempron Athlon 64 x2/ Sempron CPU 100 / 1000 Mb 10 / 100 / 1000 Mb LAN (Gigabit RTL 8111B PHY (Gigabit RTL 8111B PHY 68 - Biostar TFORCE TF7050-M2 | MANUAL - Page 69
CPU x1 x3 CMOS x1 USBコネクタ x3 x1 24ピン) x1 4ピン) x1 PS/2 x1 PS/2マウス x1 VGAポート x1 DVI-Dポート x1 LANポート x1 USBポート x4 Ver 5.x) x6 Ver 6.x) x3 235 mm (幅) X 244 mm (高さ) RAID 0 / 1 / 5 / 0+1 Windows 2000 / XP / VISTA Windows 2000 / XP / VISTA OS Biostar
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
 |
 |
TF7050-M2/TF7025-M2 Setup Manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.