Biostar TP45 HP Setup Manual
Biostar TP45 HP Manual
 |
View all Biostar TP45 HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Biostar TP45 HP manual content summary:
- Biostar TP45 HP | Setup Manual - Page 1
I45 Setup Manual FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation - Biostar TP45 HP | Setup Manual - Page 2
5.3 How RAID Works 23 Chapter 6: T-Power BIOS & Software 27 6.1 T-Power BIOS 27 6.2 T-Power Software 35 Chapter 7: Useful Help 45 7.1 Driver Installation Note 45 7.2 Extra Information 46 7.3 AMI BIOS Beep Code 47 7.4 AMI BIOS Post Code 48 7.5 Troubleshooting 50 Appendencies: SPEC In Other - Biostar TP45 HP | Setup Manual - Page 3
TPower I45 1.1 BEFORE YOU START Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions ATA Power Cable X 6 Rear I/O Panel for ATX Case X 1 User's Manual X 1 Fully Setup Driver CD X 1 FDD Cable X 1 (optional) USB 2.0 Cable X1 ( - Biostar TP45 HP | Setup Manual - Page 4
Motherboard Manual 1.3 MOTHERBOARD FEATURES SPEC LGA 775 Supports Execute Disable Bit / Enhanced Intel Intel Core2Duo / Core2Quad / CPU SpeedStep® / Intel Support 800 / 1066 / 1333 / 1600 MHz Chipset Intel P45 Intel compliant. Port-Multiplier/RAID 0,1 support LAN Realtek RTL 8111C - Biostar TP45 HP | Setup Manual - Page 5
Support Windows 2000 / XP / VISTA TPower I45 SPEC x1 Supports front panel audio function x1 Supports CD audio-in function x2 Supports digital audio out function x1 Supports connection x2 Connect to SATA devices ATX Biostar Reserves the right to add or remove support for any OS with or without notice - Biostar TP45 HP | Setup Manual - Page 6
MOTHERBOARD LAYOUT JKBMS1 JATXPWR1 LGA775 JUSB2 CPU1 JUSB1 JCFAN1 DDR2_A1 DDR2_A2 DDR2_B1 DDR2_B2 BIOS ESATAX1 JUSBV1 JRJ45USB1 JNFAN1 JAUDIO1 J1 Int el P45 JATXPWR2 PEX1_2 LAN PEX16_1 JCMOS1 JSPDIF_OUT2 JCDIN1 PEX1_1 JPE1 JPE3 JPE5 JPE7 JPE2 JPE4 JPE6 JPE8 JPE9 BAT1 Intel - Biostar TP45 HP | Setup Manual - Page 7
TPower I45 CHAPTER 2: HARDWARE INSTALLATION 2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU) Special Notice: Remove Pin Cap before installation, and make good preservation for future use. When the CPU is removed, cover the Pin Cap on the empty socket to ensure pin legs won't be damaged. Pin Cap Step 1: - Biostar TP45 HP | Setup Manual - Page 8
Motherboard Manual Step 2: Look for the triangular cut edge on socket, and the golden dot on CPU should point forwards this triangular cut edge. The CPU will fit only in the correct orientation. Step 2-1: Step 2-2: Step 3: - Biostar TP45 HP | Setup Manual - Page 9
TPower I45 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan 2 +12V 3 FAN RPM rate sense JSFAN1 Note: The JNFAN1/JSFAN1 support 3-pin head connectors, and the JCFAN1 supports 4-pin head connector. When connecting with wires onto connectors, please note that - Biostar TP45 HP | Setup Manual - Page 10
DD R2_A1 DD R2_A2 DD R2_B1 DD R2_B2 Motherboard Manual 2.3 INSTALLING SYSTEM MEMORY A. Memory Modules 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM - Biostar TP45 HP | Setup Manual - Page 11
TPower I45 B. Memory Capacity DIMM Socket Location DDR2 Module DDR2_A1 256MB/512MB/1GB/2GB DDR2_A2 256MB/512MB/1GB/2GB DDR2_B1 256MB/512MB/1GB/2GB DDR2_B2 256MB/512MB/1GB/2GB Total Memory Size Max is 8GB. C. Dual Channel Memory installation To trigger the Dual Channel function of the - Biostar TP45 HP | Setup Manual - Page 12
Motherboard Manual 2.4 CONNECTORS AND SLOTS FDD1: Floppy Disk Connector The motherboard provides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the provided floppy drive ribbon cables. 33 1 34 2 IDE1: IDE/ATAPI - Biostar TP45 HP | Setup Manual - Page 13
TPower I45 SATA1~SATA3: Serial ATA Connectors The motherboard has a PCI to SATA Controller with 6 channels SATA interface, it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s. SATA3 SATA2 SATA1 PCI1/PCI2: Peripheral Component Interconnect Slots This motherboard is equipped with 2 - Biostar TP45 HP | Setup Manual - Page 14
Motherboard Manual design of this motherboard supports dual PCI-Express graphics cards using CrossFire technology with multiple displays. When using CrossFire, this slot is master and runs with x8 speed. - To configure for CrossFire, please refer to the instructions - Biostar TP45 HP | Setup Manual - Page 15
TPower I45 CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW TO SETUP JUMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the - Biostar TP45 HP | Setup Manual - Page 16
Motherboard Manual JATXPWR2: ATX Power Source Connector This connector allows user to connect 24-pin power connector on the ATX power supply. 12 24 1 13 Pin Assignment - Biostar TP45 HP | Setup Manual - Page 17
TPower I45 J1: Auxiliary Power for Graphics This connector is an auxiliary power connection for graphics cards. Exclusive power for the graphics card provides better graphics performance. - Biostar TP45 HP | Setup Manual - Page 18
Motherboard Manual JAUDIOF1: Front Panel Audio Header This header allows user to connect the front audio output cable with the PC front panel. This header allows only - Biostar TP45 HP | Setup Manual - Page 19
TPower I45 JSPDIF_OUT1/JSPDIF_OUT2: Digital Audio-out Connectors JSPDIF_OUT1 is for connecting the PCI bracket SPDIF output, and JSPDIF_OUT2 is for connecting to the HDMI audio of - Biostar TP45 HP | Setup Manual - Page 20
CMOS Header By placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data, please carefully follow the procedures to avoid damaging the motherboard. 3 1 Pin 1-2 Close: Normal Operation (default). 3 1 3 1 Pin 2-3 Close: Clear CMOS data. ※ Clear CMOS Procedures - Biostar TP45 HP | Setup Manual - Page 21
TPower I45 JUSBV1/JUSBV2: Power Source Headers for USB Ports Pin 1-2 Close: JUSBV1: +5V for USB ports at JUSB1/JUSB2/JRJ45USB1. JUSBV2: +5V for USB ports at - Biostar TP45 HP | Setup Manual - Page 22
Motherboard Manual BIOS POST Code/CPU Temperature Indicator This indicator will show POST code while booting; after the booting sequence, it will show current CPU temperature. Please refer to Chapter 7.4 for all the BIOS POST codes. JPE1~JPE9: CrossFire Switch Jumpers The setting of these jumpers - Biostar TP45 HP | Setup Manual - Page 23
TPower I45 CHAPTER 4: CROSSFIRE FUNCTION 4.1 REQUIREMENTS Only Windows XP/Vista supports CrossFire (Dual Video) function. Two identical CrossFire-ready graphics cards that are ATI certified. The graphics card driver should support CrossFire technology. The power supply unit must provide at least the - Biostar TP45 HP | Setup Manual - Page 24
Motherboard Manual Step 2: Insert the two CrossFire-Ready graphics cards into PEX16_1 (Master) Connect the CrossFire Bridge with two graphics cards. Installation completes. NOTE For more detail information of hardware/software installation and configuration of CrossFire function, please visit - Biostar TP45 HP | Setup Manual - Page 25
5: RAID FUNCTIONS TPower I45 5.1 OPERATION SYSTEM Supports Windows 2000 Professional, Windows XP, and Windows VISTA. 5.2 RAID ARRAYS RAID supports the following types of RAID arrays: RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for many applications. RAID - Biostar TP45 HP | Setup Manual - Page 26
Motherboard Manual RAID 1: Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active - Biostar TP45 HP | Setup Manual - Page 27
TPower I45 RAID 1+0 (For Onboard SATA Only): RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 1+0 solution for improved other RAID levels in an array, and allows for spare disks. Drawbacks: Requires twice the available disk space for data redundancy, the same as RAID level - Biostar TP45 HP | Setup Manual - Page 28
Motherboard Manual RAID 5 (For Onboard SATA Only): RAID 5 stripes both data and parity information service. Benefits: An ideal combination of good performance, good fault tolerance, and high capacity and storage efficiency. Drawbacks: Individual block data transfer rate same as a single disk - Biostar TP45 HP | Setup Manual - Page 29
TPower I45 CHAPTER 6: T-POWER BIOS & SOFTWARE 6.1 T-POWER BIOS T-Power BIOS Features Overclocking Navigator Engine (O.N.E.) Memory Integration Test (M.I.T., under Overclock Navigator Engine) BIO-Flasher: Update BIOS file from USB Flash Drive or FDD Self Recovery System (S.R.S) Smart Fan Function - Biostar TP45 HP | Setup Manual - Page 30
Configuration > Voltage Configuration Memory Test [Disabled] Options Normal Automate OverClock Manual OverClock Select Screen Select Item EnterGo to Manual OverClock] =========== Automate OverClock System =========== Auto OverClock System [V6-Tech Engine] Manual OverClock System Intel - Biostar TP45 HP | Setup Manual - Page 31
TPower I45 item allows you to control the DDR2 ram enhanced mode. DRAM Timing Configuration Enter OverClock System =========== Auto OverClock System [V6-Tech Engine] Manual OverClock System Intel Memory Test [Disabled] Options Normal Automate OverClock Manual OverClock Select Screen - Biostar TP45 HP | Setup Manual - Page 32
Motherboard Manual V6 Tech Engine This engine will make a good over-clock performance. Main Advanced PCIPnP BIOS SETUP UTILITY Boot [Automate OverClock] =========== Automate OverClock System =========== Auto OverClock System [V6-Tech Engine] Manual OverClock System Intel(R) SpeedStep( - Biostar TP45 HP | Setup Manual - Page 33
TPower I45 Notices: Not all types of Intel CPU perform above overclock setting ideally; the difference will be based on the selected CPU model. B. Memory Integration Test (M.I.T.) This function is under "Overclocking Navigator Engine" item. MIT allows users to test memory compatibilities, and no - Biostar TP45 HP | Setup Manual - Page 34
, press during the Power-On Self Tests (POST) procedure while booting up. Updating BIOS with BIO-Flasher 1. Go to the website to download the latest BIOS file for the motherboard. 2. Then, save the BIOS file into a USB pen drive or a floppy disk. 3. Insert the USB pen drive or the floppy - Biostar TP45 HP | Setup Manual - Page 35
TPower I45 D. Self Recovery System (S.R.S.) This function can't be seen under BIOS setup; and is always on whenever the system starts up. However, it can prevent system hang-up due to inappropriate overclock actions. When the system hangs up, S.R.S. will automatically log in the default BIOS setting - Biostar TP45 HP | Setup Manual - Page 36
Motherboard Manual Smart Fan Calibration Choose this item and then the BIOS will automatically test and detect the CPU/System BIOS-ROM. Users are able to reload any saved CMOS setting for customizing system configurations. Moreover, users are able to save an ideal overclock setting during overclock - Biostar TP45 HP | Setup Manual - Page 37
TPower I45 6.2 T-POWER SOFTWARE T-Power2 is an integration of four functions: OC Tweaker for over-clock, eHot-Line for technical support, BIOS-watch for system monitor, and Biostar Flash for BIOS update. Installing T-Power2 1. Insert the Setup CD to the optical drive. The drivers installation - Biostar TP45 HP | Setup Manual - Page 38
On the main panel, you can click on the OC Tweaker button to launch this function. The OC Tweaker provides automatic/manual over-clock function for BIOSTAR motherboard, and even for some BIOSTAR VGA card (VR8xxx series only) which is powered by V-Ranger. Th is a rea shows clo ck infor matio - Biostar TP45 HP | Setup Manual - Page 39
be closed before the auto over-clock procedure. The utility will do a series of test continually; do not do any operation during the test procedure. Click OK to proceed or Cancel to stop. After proceeding the tests would start, and a warning message would continually show telling that do not - Biostar TP45 HP | Setup Manual - Page 40
Motherboard Manual By clicking , the utility would over-clock the system with certain fixed percentage. When the V3/V6/V9/V12/ - Biostar TP45 HP | Setup Manual - Page 41
TPower I45 BIO-watch BIO-watch is a control and monitor utility that helps you to utility, fan calibrate will be made automatically. After that you can also click to manually calibrate the fan. When the "AUTO" button looks like auto-control. Click the button to speed - Biostar TP45 HP | Setup Manual - Page 42
Motherboard Manual Increase Speed Decrease Speed A ut o-Co nt ro l OFF Click the auto-control off and then the adjust level will show; use the level to - Biostar TP45 HP | Setup Manual - Page 43
then send these information to our tech-support department to help you fix the problem. Before you use this utility,please set Outlook Express as your default e-mail clientapplication program. The main panel of eHot-Line shows BIOS information, motherboard model name, and chipset information, click - Biostar TP45 HP | Setup Manual - Page 44
including motherboard/BIOS/CPU/ service. If you are not using Outlook Express as your default e-mail client application, you may need to save the system information to a .txt file and send the file to our tech support with other e-mail application. Go to the following web http://www.biostar - Biostar TP45 HP | Setup Manual - Page 45
TPower I45 Biostar Flash Biostar Flash is a convenient utility which allows you to update your motherboard BIOS under Windows system. Clear CMOS function (Award BIOS) Update BIOS with a B IOS fil e Shows curr ent BIOS infor mati on Restart Your System (AMI BIOS) or Save current BIOS to a .bi n - Biostar TP45 HP | Setup Manual - Page 46
Motherboard Manual Before doing this, please download the proper BIOS file from our website: www.biostar.com.tw Update BIOS procedure should be run with Clear CMOS (or Restart) function, so please check on Clear CMOS (or Restart) first. (Restart Your System) Then click Update BIOS - Biostar TP45 HP | Setup Manual - Page 47
USEFUL HELP TPower I45 7.1 DRIVER INSTALLATION NOTE After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance. You will see the following window after you insert the CD The setup guide will auto - Biostar TP45 HP | Setup Manual - Page 48
Motherboard Manual 7.2 EXTRA INFORMATION CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the - Biostar TP45 HP | Setup Manual - Page 49
video adapter) Troubleshooting POST BIOS Beep Codes Number of Beeps Troubleshooting Action 1, 3 Reseat the memory, or replace with known good modules. Fatal error indicating a serious problem with the system. Consult your system manufacturer. Before declaring the motherboard beyond all hope - Biostar TP45 HP | Setup Manual - Page 50
and CMOS checksum is OK. Verify CMOS checksum manually by reading storage area. If the CMOS checksum is bad, update CMOS with power-on default values and clear ) and interrupt vector table. Do R/W test to CH-2 count reg. Initialize CH-0 as system timer. Install the POSTINT1Ch handler. Enable IRQ-0 in - Biostar TP45 HP | Setup Manual - Page 51
8C 8D 8E 90 A1 A2 A4 A7 A9 AA AB AC B1 00 TPower I45 Description Displaying sign-on message, CPU information, setup key message, and any successfully installed in the system and update the BDA, EBDA...etc. Updates CMOS memory size from memory found in memory test. Allocates memory for Extended BIOS - Biostar TP45 HP | Setup Manual - Page 52
Motherboard Manual 7.5 TROUBLESHOOTING Probable Solution 1. No power to the system at all 1. Make sure power cable is Power light don't illuminate, fan securely plugged in. inside power supply does not turn 2. Replace cable. on. 3. Contact technical support. 2. Indicator light on keyboard - Biostar TP45 HP | Setup Manual - Page 53
TPower I45 This page is intentionally left blank. 51 - Biostar TP45 HP | Setup Manual - Page 54
Motherboard Manual APPENDENCIES: SPEC IN OTHER LANGUAGE GERMAN Spezifikationen LGA 775 Unterstützt Execute Disable Bit / Enhanced Intel Intel Intel Core2Duo / Core2Quad / CPU SpeedStep® / Intel Intel P45 Intel Version 2.0. Unterstützt Port-Multiplier/RAID 0,1 LAN Realtek RTL 8111C 10 - Biostar TP45 HP | Setup Manual - Page 55
öße 244 mm (B) X 305 mm (L) OS-Unterstüt Windows 2000 / XP / VISTA zung TPower I45 Spezifikationen x1 Jeder Anschluss unterstützt 2 Diskettenlaufwerke x1 x1 USB-Anschlüsse x1 x1 x1 x1 x1 x1 x6 x6 x2 ATX Biostar behält sich das Recht vor, ohne Ankündigung die Unterstützung für ein Betriebssystem hinzuzufü - Biostar TP45 HP | Setup Manual - Page 56
Motherboard Manual FRANCE SPEC LGA 775 Prend en charge les technologies d'exécution de bit de Processeurs Intel Core2Duo / Core2Quad désactivation / Intel SpeedStep® optimisée/ UC / PentiumDual-Core / Celeron Dual-Core / d'architecture Intel Intel P45 Intel 2.0 Prise en charge RAID 0 / 1 / - Biostar TP45 HP | Setup Manual - Page 57
TPower I45 SPEC Connecteur de disquette Chaque connector prend en charge 2 lecteurs de x1 eSATA x2 Dimensions 244 mm (l) X 305 mm (H) ATX de la carte Support SE Windows 2000 / XP / VISTA Biostar se réserve le droit d'ajouter ou de supprimer le support de SE avec ou sans préavis. 55 - Biostar TP45 HP | Setup Manual - Page 58
Motherboard Manual ITALIAN SPECIFICA LGA 775 Supporto di Execute Disable Bit / Enhanced CPU Processore Intel Core2Duo / Core2Quad Intel SpeedStep® / Architettura Intel 1600 MHz Chipset Intel P45 Intel ICH10R Fintek F71887F Compatibile specifiche SATA Versione 2.0. Supporto RAID 0 / 1 / 5 / - Biostar TP45 HP | Setup Manual - Page 59
TPower I45 SPECIFICA Connettore floppy x1 Ciascun connettore supporta 2 unità Floppy Porta seriale mm (larghezza) x 305 mm ATX i scheda (altezza) Sistemi Biostar si riserva il diritto di aggiungere o operativi Windows 2000 / XP / VISTA rimuovere il supporto di qualsiasi sistema supportati - Biostar TP45 HP | Setup Manual - Page 60
Motherboard Manual SPANISH Especificación LGA 775 Admite Bit de deshabilitación de ejecución / Intel Procesador Intel Core2Duo / Core2Quad / SpeedStep® Mejorado / Intel Conjunto de Intel P45 chips Intel ICH10R Fintek Compatible con la versión SATA 2.0. Admite RAID 0 / 1 / 5 / 1+0 Tasas - Biostar TP45 HP | Setup Manual - Page 61
TPower I45 Especificación Conector disco flexible X1 Cada conector soporta 2 unidades de disco flexible Puerto serie X1 (A) X 305 Mm. (H) ATX la placa Soporte de sistema Windows 2000 / XP / VISTA operativo Biostar se reserva el derecho de añadir o retirar el soporte de cualquier SO - Biostar TP45 HP | Setup Manual - Page 62
Motherboard Manual PORTUGUESE ESPECIFICAÇÕES LGA 775 Suporta as tecnologias Execute Disable Bit / Enhanced Processador Intel Core2Duo / Core2Quad CPU Intel SpeedStep® / Intel MHz Chipset Intel P45 Intel ICH10R Fintek F71887F a especificação SATA versão 2.0. Suporta as funções RAID 0 / 1 - Biostar TP45 HP | Setup Manual - Page 63
TPower I45 ESPECIFICAÇÕES Conector da unidade de disquetes x1 Cada conector suporta 2 x2 Tamanho 244 mm (L) X 305 mm (A) ATX da placa Sistemas A Biostar reserva-se o direito de adicionar ou remover operativos Windows 2000 / XP / VISTA suporte para qualquer sistema operativo com ou sem - Biostar TP45 HP | Setup Manual - Page 64
Motherboard Manual POLISH SPEC Procesor LGA 775 Obsługa Execute Disable Bit / Enhanced Intel Procesor Intel Core2Duo / Core2Quad / SpeedStep® / Intel Gb/s. SATA II ICH10R Zgodność ze specyfikacją SATA w wersji 2.0. Obsługa RAID 0 / 1 / 5 / 1+0 Transfer danych do 3 Gb/s. eSATA Marvell - Biostar TP45 HP | Setup Manual - Page 65
TPower I45 SPEC Złącze napędu dyskietek x1 Każde złącze obsługuje 2 napędy x2 Wymiary 244 mm (S) X 305 mm (W) ATX płyty Obsluga systemu Windows 2000 / XP / VISTA operacyjne go Biostar zastrzega sobie prawo dodawania lub odwoływania obsługi dowolnego systemu operacyjnego bez powiadomienia - Biostar TP45 HP | Setup Manual - Page 66
Motherboard Manual RUSSIAN СПЕЦ CPU LGA 775 Execute Disable Bit / Intel Core2Duo / Core2Quad / Enhanced Intel SpeedStep® / Intel Architecture-64 II ICH10R SATA 2.0. RAID 0 / 1 / 5 / 1+0 3 eSATA Marvell 88SE6121 SATA 2.0. Port-Multiplier/RAID 0,1 Realtek RTL 8111C - Biostar TP45 HP | Setup Manual - Page 67
TPower I45 СПЕЦ 2 x1 x1 IDE 2 x1 SATA x6 1 SATA x1 x1 панели CD x1 CD S/PDIF x2 LAN x1 USB-порт x6 ода x6 eSATA порт x2 Размер 244 мм (Ш) X 305 мм (В) ATX панели Windows 2000 / XP / VISTA OS Biostar OS 65 - Biostar TP45 HP | Setup Manual - Page 68
Motherboard Manual ARABIC Execute Disable Bit / Enhanced Intel LGA 775 SpeedStep® / Intel Architecture-64 / Extended Intel 3 2.0 SATA RAID 0 / 1 / 5 / 1+0 ICH10R SATA II 3 2.0 SATA Marvell 88SE6121 eSATA RAID 0,1 /Port-Multiplier - Biostar TP45 HP | Setup Manual - Page 69
IDE SATA Smart Fan USB ATX Biostar TPower I45 1 1 1 IDE 6 SATA 1 1 PS/2 1 PS/2 1 6 USB 6 2 eSATA 244 305 X Windows 2000 / XP / VISTA 67 - Biostar TP45 HP | Setup Manual - Page 70
Motherboard Manual JAPANESE 仕様 LGA 775 Execute Disable Bit / Enhanced Intel SpeedStep® / Intel Core2Duo / Core2Quad / CPU Intel 最高3 Gb SATA II ICH10R SATA 2.0 RAID 0 / 1 / 5 / 1+0 最高3 Gb eSATA Marvell 88SE6121 SATA 2.0 RAID 0,1 /Port-Multiplier LAN Realtek RTL 8111C - Biostar TP45 HP | Setup Manual - Page 71
S/PDIF ネクタ S/PDIF CPU CMOS USBコネクタ 24ピン) 8ピン) 4ピン) PS/2 PS/2マウス LANポート I/O USBポート eSATAポート 244 mm (幅) X 305 mm (高さ) OS Windows 2000 / XP / VISTA TPower I45 仕様 x1 2 x1 x1 2つのIDE x6 1つのSATA x1 x1 x1 CD x2 x1 x1 CPU x2 x1
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
 |
 |
TPower I45 Setup Manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.