Biostar U8569 U8569 user's manual

Biostar U8569 Manual

Get Biostar U8569 PDF manuals and user guides View all Biostar U8569 manuals
Add to My Manuals
Save this manual to your list of manuals

Biostar U8569 manual content summary:

  • Biostar U8569 | U8569 user's manual - Page 1
    energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee vendor's approval in writing. The content of this user's manual is subject to be changed without notice and we will not be responsible for any mistakes
  • Biostar U8569 | U8569 user's manual - Page 2
    Notice Mainboard Features 1. Features Introduction 1-1. Hardware 1-2. BIOS & Software 1-3. Package Contents 2. Mainboard Configuration 2-1. Layout of U8569 2-2. Component Index 2-2. Component Index 3. CPU Configuration 3-1. CPU Socket 478 Configuration Steps: 3-2. CPU Fan Header: JCFAN1 3-3. System
  • Biostar U8569 | U8569 user's manual - Page 3
    4-9. 5V / 5VSB Selection for KB: JKBV1 4-10. ATX 12V Power Connector: JATXPWR2 4-11. 5V / 5VSB Selection for USB: JUSBV3 4-12. 5V / 5VSB Selection for USB: JUSBV4 5. RAM Module Configuration 5-1. DDR SDRAM 5-2 SDRAM 5-3. How to install DDR/SDRAM DIMM Module 6. Peripheral Port Features 6-1. PS/2
  • Biostar U8569 | U8569 user's manual - Page 4
    tradition of its predecessors, this mainboard continues a commitment to reliability and performance and strives for full compliance and compatibility with industry software and hardware standards. U8569 Features:
  • Biostar U8569 | U8569 user's manual - Page 5
    1x, 2x and 4x data transfer mode. Chipset - VIA P4X266E (VT8753E)/ VT8235. Chipset - ITE 8705 1.Supports 200MHz, 266MHz DDR SDRAM or PC100, PC133 SDRAM. 2.Supports 64Mb, 128Mb, 256Mb and 512Mb technologies for x8 and 16 devices. 3.The largest memory capacity is 2 GB for DDR memory. 4.The largest
  • Biostar U8569 | U8569 user's manual - Page 6
    Motherboard is equipped with a memory controller providing shadow RAM and support for ROM BIOS. 1.Supports Award BIOS ™ power management functionality. 2.Has a power down timer from 1 to 15 minutes. 1.Contains 1 AGP slot. 2.Contains 1 CNR slot. 3. Contains 3 32-bit PCI bus slots 1.Dual Speed -
  • Biostar U8569 | U8569 user's manual - Page 7
    Compliant with AC'97 specification. 3.18-bit full duplex stereo ADC, DACs. 4.SNR>95 Bb throughmixer and DAC. 1.One multi-mode Parallel Port capable of supporting the following specifications: Standard & Bidirection Parallel Port. Enhanced Parallel Port (EPP). Extended Capabilities Port (ECP). Normal
  • Biostar U8569 | U8569 user's manual - Page 8
    1.Award legal BIOS. 2.Supports APM1.2. 3.Supports USB Function. 4.Supports ACPI. Offers the highest performance for MS-DOS, Windows NT, Windows 2000, Windows ME, Windows XP, Novell, LINUX, and SCO UNIX etc. 1-3. Package Contents 1.HDD Cable. 2.FDD Cable. 3.Flash Memory Writer for BIOS Update. 4.USB
  • Biostar U8569 | U8569 user's manual - Page 9
    2. Mainboard Configuration 2-1. Layout of U8569
  • Biostar U8569 | U8569 user's manual - Page 10
    2-2. Component Index
  • Biostar U8569 | U8569 user's manual - Page 11
    3. CPU Configuration 3-1. CPU Socket 478 Configuration Steps: CPU Fan CPU 1. Pull the lever sideways away from the socket then raise the lever up to a 90-degree angle. 2. Locate Pin A in the socket and look for the white dot or cut edge in the CPU. Match Pin A with the white dot/cut edge then insert
  • Biostar U8569 | U8569 user's manual - Page 12
    CPU Configuration Layout
  • Biostar U8569 | U8569 user's manual - Page 13
    3-2. CPU Fan Header: JCFAN1 Pin No. 1 2 3 Assignment Ground +12V Sense 3-3. System Fan Header: JSFAN1 Pin No. 1 2 3 Assignment Ground +12V Sense
  • Biostar U8569 | U8569 user's manual - Page 14
    4. Jumpers, Headers & Connectors
  • Biostar U8569 | U8569 user's manual - Page 15
    Connector 23 IRTX 24 IRRX SPK (Speaker Connector) An offboard speaker can be installed on the motherboard as a manufacturing option. An offboard speaker can be connected to the motherboard at the front panel connector. The speaker (onboard or offboard) provides error beep code information
  • Biostar U8569 | U8569 user's manual - Page 16
    any keyboard activity, mouse activity, modem activity or when the sleep button is depressed again. APM (Advanced Power Management) must be enabled in the system BIOS and the APM driver must be loaded. ON/OFF (Power Button) This connector can be attached to a front panel power switch. The switch must
  • Biostar U8569 | U8569 user's manual - Page 17
    must configure the second hard drive on IDE1 to Slave mode by setting the jumper accordingly. • IDE2 (Secondary IDE Connector) The IDE2 controller can also support a Master and a Slave drive. The configuration is similar to IDE1. The second drive on this controller must be set to slave mode.
  • Biostar U8569 | U8569 user's manual - Page 18
    4-4. Floppy Disk Connector: FDD1 The motherboard provides a standard floppy disk connector (FDC) that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the provided floppy drive ribbon cables. 4-5. Wake On LAN Header: JWOL1 Pin No. 1 2 3 Assignment +5V SB Ground
  • Biostar U8569 | U8569 user's manual - Page 19
    3. Wait for five seconds. 4. Make JCMOS1 (1-2) closed. 5. Let AC power on. 6. Reset your desired password or clear the CMOS data. 4-7. Front USB Header: JUSB3 (JUSB3) Pin 1 3 5 7 9 Assignment +5V(fused) USBP2USBP2+ Ground KEY Pin Assignment 2 +5V(fused) 4 USBP3- 6 USBP3+ 8 Ground 10
  • Biostar U8569 | U8569 user's manual - Page 20
    4-10. ATX 12V Power Connector: JATXPWR2 PIN 1 2 Assignment +12V +12V PIN 3 4 Assignment Ground Ground 4-11. 5V / 5VSB Selection for USB: JUSBV3 JUSBV3 Assignment 4-12. 5V / 5VSB Selection for USB: JUSBV4 JUSBV4 Assignment
  • Biostar U8569 | U8569 user's manual - Page 21
    5. RAM Module Configuration 5-1. DDR SDRAM DRAM Access Time: 2.5V Unbuffered DDR SDRAM PC1600/ PC2100 Type required. DRAM Type: 128MB/ 256MB/ 512MB/ 1GB DIMM Module (184 pin) Total Memory Size with unbuffer DIMMs
  • Biostar U8569 | U8569 user's manual - Page 22
    you use SDRAM, the memory power will automatically set to 3.3V. !For the above settings, you can only use one kind of memory on this motherboard. It is forbidden to insert both kind of memory simultaneously. You must insert only DDR or SDRAM.
  • Biostar U8569 | U8569 user's manual - Page 23
    5-3. How to install DDR/SDRAM DIMM Module 1. The DDR DIMM socket has a " Plastic Safety Tab", and the DDR DIMM memory module has an Asymmetrical notch", so the DDR DIMM memory module can only fit into the slot in one direction 2. Push the tabs out. Insert the DDR DIMM memory modules into the socket
  • Biostar U8569 | U8569 user's manual - Page 24
    1. The SDRAM DIMM socket has a " Plastic Safety Tab", and the SDRAM DIMM memory module has an Asymmetrical notch", so the SDRAM DIMM memory module can only fit into the slot in one direction. 2. Push the tabs out. Insert the SDRAM DIMM memory modules into the socket at a 90-degree angle, then push
  • Biostar U8569 | U8569 user's manual - Page 25
    PS/2 USB Keyboard COM1 JCOM1 COM2 Speaker Line In Mic Out In JCOM2 JSPKR1 JLIN1 JMIC1 6-1. PS/2 Mouse / Keyboard Connector: JKBMS1 The motherboard provides a standard PS/2 mouse / Keyboard mini DIN connector for attaching a PS/2 mouse. You can plug a PS/2 mouse / Keyboard directly into this
  • Biostar U8569 | U8569 user's manual - Page 26
    6-2. USB & LAN Port Connectors: JUSBLAN1 6-2-1. USB Connectors: USB Connector (the below one) Pin 1 2 3 4 USB Connector (the above one) Pin 5 6 7 8 Assignment +5 V (fused) USBP1USBP1+ Ground Assignment +5 V (fused) USBP2USBP2+ Ground
  • Biostar U8569 | U8569 user's manual - Page 27
    6-2-2. LAN Port Connector (Optional) This connector allows you to connect to the Internet through a Local Area Network (LAN). You can set up the connection by entering account information provided by your ISP. LAN Port Connector Pin 9 10 11 12 13 14 Assignment VCC3 TD+ TDRD+ RDNC
  • Biostar U8569 | U8569 user's manual - Page 28
    6-3. Serial and Parallel Interface Ports This system comes equipped with one serial port and one parallel port. Both types of interface ports will be explained in this chapter. 6-3-1. The Serial Interface: JCOM1/ JCOM2 The serial interface port is sometimes referred to as an RS-232 port or an
  • Biostar U8569 | U8569 user's manual - Page 29
    6-3-2. Parallel Interface Port: JPRNT1 Unlike the serial ports, parallel interface port has been standardized and should not present any difficulty interfacing peripherals to your system. Sometimes called centronics port, the parallel port is almost exclusively used with printers. The parallel port
  • Biostar U8569 | U8569 user's manual - Page 30
    6-4. Game (Joystick/MIDI) Port Connector: JAUD_GAME This connector allows you to connect a joystick or game pad for playing computer games. Also, you may play or edit professional music by connecting MIDI devices. Joystick/MIDI 6-5. Audio Port Connectors: JSPKR1/JLIN1/JMIC1 Speaker Out Line In
  • Biostar U8569 | U8569 user's manual - Page 31
    6-6. Audio Subsystem
  • Biostar U8569 | U8569 user's manual - Page 32
    6-6-1. CD-ROM Audio-In Header: JCDIN1 Pin No. 1 2 Assignment Left Channel Input Ground 3 Ground 4 Right Channel Input 6-6-2. Front Panel Audio Header: JAUDIO1 Pin No. Assignment Pin No. Assignment 1 Mic In 2 Ground 3 Mic Power 4 Audio Power 5 RT Line Out 6 RT Line Out 7
  • Biostar U8569 | U8569 user's manual - Page 33
    indicates the temperatures, voltage and CPU fan speed as well as the chipset information. Also, in the About panel, you can get detail descriptions about BIOS model and chipsets. In addition, the frequency status of CPU, memory, AGP and PCI along with the CPU speed are synchronically shown on our
  • Biostar U8569 | U8569 user's manual - Page 34
    System Requirement OS Support: Windows 98 SE, Windows Me, Windows 2000, Windows XP DirectX: DirectX 8.1 or above. (The Windows XP operating system includes DirectX 8.1. If you use Windows XP,
  • Biostar U8569 | U8569 user's manual - Page 35
    2. When you see the following dialog in setup procedure, it means setup is completed. If the "Launch the WarpSpeeder Tray Utility" checkbox is checked, the Tray Icon utility and [ WarpSpeeder™ ] utility will be automatically and immediately launched after you click "Finish" button.
  • Biostar U8569 | U8569 user's manual - Page 36
    Usage The following figures are just only for reference, the screen printed in this user manual will change according to your motherboard on hand. [ WarpSpeeder™ ] includes 1 tray icon and 5 panels: 1. Tray Icon: Whenever the Tray Icon utility is launched, it will display a little tray icon on the
  • Biostar U8569 | U8569 user's manual - Page 37
    2. Main Panel If you click the tray icon, [ WarpSpeeder™ ] utility will be invoked. Please refer do the following figure; the utility's first window you will see is Main Panel. Main Panel contains features as follows: a. Display the CPU Speed, CPU external clock, Memory clock, AGP clock, and PCI
  • Biostar U8569 | U8569 user's manual - Page 38
    3. Voltage Panel Click the Voltage button in Main Panel, the button will be highlighted and the Voltage Panel will slide out to up as the following figure. In this panel, you can decide to increase CPU core voltage and Memory voltage or not. The default setting is "No". If you want to get the best
  • Biostar U8569 | U8569 user's manual - Page 39
    3MHz button", "-1MHz button", "+1MHz button", and "+3MHz button": provide user the ability to do real-time overclock adjustment. Warning: Manually overclock is potentially dangerous, especially when the overclocking percentage is over 110 %. We strongly recommend you verify every speed you overclock
  • Biostar U8569 | U8569 user's manual - Page 40
    stable frequency according to the Recovery Dialog's setting. d. "Verify button": User can click this button and [ WarpSpeeder™ ] will proceed a testing for current frequency. If the testing is ok, then the current frequency will be saved into system registry. If the testing fail, system will do a
  • Biostar U8569 | U8569 user's manual - Page 41
    , you can get model name and detail information in hints of all the chipset that are related to overclocking. You can also get the mainboard's BIOS model and the Version number of [ WarpSpeeder™ ] utility.
  • Biostar U8569 | U8569 user's manual - Page 42
  • Biostar U8569 | U8569 user's manual - Page 43
    Note: Because the overclock, overvoltage, and hardware monitor features are controlled by several separate chipset, [ WarpSpeeder™ ] divide these features to separate panels. If one chipset is not on board, the correlative button in Main panel will be disabled, but will not interfere other panels'
  • Biostar U8569 | U8569 user's manual - Page 44
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
±±
±±±
±
²³³±´µ¶·¸¹º»¼·µ±ºµ½±³·¾¿¸¼ÀÁ»
±
±
This equipment has been tested and found to comply with the
limits of a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions,
may
cause
harmful
interference
to
radio
communications. There is no guarantee that interference will not
occur in a particular installation.
The vendor makes no representations or warranties with respect
to the contents here of and specially disclaims any implied
warranties
of merchantability or fitness for any purpose. Further
the vendor reserves the right to revise this publication and to
make changes to the contents here of without obligation to notify
any party beforehand.
Duplication of this publication, in part or in whole, is not allowed
without first obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without
notice and we will not be responsible for any mistakes found in
this user’s manual. All the brand and product names are
trademarks of their respective companies.