Bissell CrossWave Cordless Multi-Surface Wet Dry Vac 2551 Quick Start Guide

3

1

4

2

5

6

Quick Start Usage Instructions

CROSSWAVE

®

CORDLESS

QUICK START GUIDE

2551 SERIES

162-0023 02/19 RevA

Place your CrossWave

Cordless onto the 3-in-1

Docking Station to charge.

For maximum run time,

charge unit for 4 hours

prior to use.

Small Area Cleaning

For small area cleaning (less than 350 sq ft), fill the

Clean Water Tank with warm tap water to the first water

fill line. Then add formula to the first formula fill line.

click

HARD FLOOR

BUTTON

RUG BUTTON

On the back of the machine,

align Clean Water Tank with

the grooves and slide tank into

place until you hear a “click”.

Turn machine ON by selecting the type of

floor you will be cleaning.

For hard floors,

choose the HARD FLOOR button and for area

rugs push the RUG button.

Each time you use the product, hold

the solution trigger for 10 seconds

to prime the system with cleaning

solution before you begin cleaning.

When you hold the trigger, LED

lights will illuminate.

When solution is flowing, you will see

bubbles forming at the edges of the

brush roll window.

You are ready to start cleaning with

your BISSELL CrossWave Cordless!

First, insert the handle

at the top of the body

of the machine until

you hear a “click”.

WARNING

Refer to the enclosed user guide

for complete instructions and important safety notices.

4h

Large Area Cleaning

For large area cleaning (up to 700 sq ft), fill the Clean

Water Tank with warm tap water to the second water

fill line. Then add formula until you get to the second

formula fill line. Screw the cap back onto the Clean

Water Tank.

Bissell CrossWave Cordless Multi-Surface Wet Dry Vac 2551 Quick Start Guide

Bissell CrossWave Cordless Multi-Surface Wet Dry Vac 2551 Manual

Bissell CrossWave Cordless Multi-Surface Wet Dry Vac 2551 manual content summary: