Bosch HMV3051U Installation Instructions - Page 12

Wall studs at both corner holes Attaching the mounting plate to the wall Aligning the mounting plate ř CAUTION:ĄWear gloves to avoid cutting fingers on sharp edges. Note:ĄMake sure the cabinet bottom is level. 1. Draw a vertical line on the wall at the center of the cabinet space. 2. Use the mounting plate as a template and place it on the wall, making sure that the tabs are touching the bottom of the cabinet (Figure 1) or the level line (Figure 2). 3. Line up the notch and centerline of the mounting plate to the centerline on the wall. 4. While holding the mounting plate, draw circles on the wall at holes A, B, C and D. Note:ĄIf neither A, B, C nor D is in a stud, find a stud somewhere in the bottom area of the mounting plate and draw a fith circle to line up with the stud. It is important to use at least one wood screw mounted firmly in a stud to support the weight of the microwave. 12